The influence of Mg on creep properties and fracture behaviors of Mar-M247 superalloy under 1255 K/200 MPa
Source abstract
Abstract
The effects of Mg microadditions on the high-temperature/low stress (1255 K/200 MPa) creep properties and fracture behavior of a Mar-M247 superalloy were investigated in this study. The results of quantitative statistical analyses showed that when Mg microadditions up to 50 ppm were made, the MC carbides located at grain boundaries (designated GB MC) were significantly refined and spheroidized and the number of MC carbides decreased. In addition, the M23C6 carbides present on GBs dramatically increased with increasing Mg contents up to 50 ppm, and the creep resistance was enhanced under the test condition of 1255 K/200 MPa. However, the creep performance of a Mar-M247 superalloy containing 80 ppm Mg deteriorated due to the formation of an extremely large amount of MC carbide and a decrease in the number of M23C6 carbides at GBs. The cracks mainly initiated and propagated along GBs in both the Mg-free and Mg-containing Mar-M247 superalloys under 1255 K/200 MPa, and the finial rupture was caused by intergranular fracture. Under the present creep condition, the optimal Mg microaddition to a Mar-M247 superalloy should be 30 to 50 ppm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. J.E. Doherty, B.H. Kear, and A.F. Giamei: J. Met., 1971, vol. 23(11), pp. 59–62.
2. D.N. Duhi and C.P. Sullivan: J. Met., 1971, vol. 23(7), pp. 38–40.
3. M.V. Nathal, R.D. Maier, and L.J. Ebert: Metall. Trans. A, 1982, vol. 13A, pp. 1767–74.10.1007/BF02647832 ↗
4. M.V. Nathal, R.D. Maier, and L.J. Ebert: Metall. Trans. A, 1982, vol. 13A, pp. 1775–83.10.1007/BF02647833 ↗
5. “Castings, Investment, MAR-M247,” Allied-Signal Aerospace Company: Engine Materials Specification 55447, Allied-Signal Aerospace Company, Phoenix, AZ, 1988.
6. M. Kaufman: Proc. Superalloys 1984, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich, eds., AIME, New York, NY, 1984, pp 43–52.
7. P.S. Kotval, J.D. Venables, and R.W. Calder: Metall. Trans., 1972, vol. 3, pp. 453–58.10.1007/BF02642467 ↗
8. T.B. Gibbons and B.E. Hopkins: J. Met. Sci., 1971, vol. 5, pp. 233–40.10.1179/030634571790439478 ↗
9. H.Y. Bor, C.G. Chao, and C.Y. Ma: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 551–61.10.1007/s11661-999-0047-3 ↗
10. G.R. Leverant and M. Gell: Trans. TMS-AIME, 1969, vol. 245, pp. 1167–73.
11. J. Schramm: U.S. Patent No. 3512963, May 19, 1970.
12. L.M. Rober and N.C. Charlotte: U.S. Patent No. 4376650, March 15, 1983.
13. L.M. Rober and N.C. Charlotte: U.S. Patent No. 4456481, June 26, 1984.
14. J.M. Moyer: Proc. Superalloys 1984, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich, eds., AIME, New York, NY, 1984, pp. 443–54.
15. P. Ma, Y. Yuan, and Z.Y. Zhong: Proc. Superalloys 1988, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds., AIME, New York, NY, 1988, pp. 625–33.
16. X.H. Xie, Z.H. Xu, B. Qu, and G.L. Chen: Proc. Superalloys 1988, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds., AIME, New York, NY, 1988, pp. 635–42.
17. Y.Q. Li, C.M. Sun, J.Y. Liu, and G.L. Chen: High Temp. Technol., 1987, vol. 5(4), pp. 201–04.10.1080/02619180.1987.11753365 ↗
18. G.L. Chen, T.H. Zhang, and W.Y. Yang: High Temp. Technol., 1988, vol. 6(3), pp. 149–52.10.1080/02619180.1988.11753392 ↗
19. Y.Q. Li and Y.H. Gong: J. Mater. Sci., 1992, vol. 27, pp. 6641–45.10.1007/BF01165948 ↗
20. G.S. Chyernyak, A.V. Smirnova, and S.B. Maslenkov: Metall. (Metalli.) SSSR, 1973, No. 1 pp. 98–104.
21. V.V. Topilin: Steel (Stal), 1978, No. 11 pp. 643–46.
22. X. Xie, K. Ni, Z. Xu, G. Ling, and N. Wang: Mech. Behaviour Mater., 1991, vol. 4, pp. 613–18.
23. H.L. Ge, W.V. Youdelis, G.L. Chen, and Q. Zhu: Mater. Sci. Technol., 1989, vol. 5, pp. 985–90.10.1179/mst.1989.5.10.985 ↗
24. G. Chen, Q. Zhu, D. Wang, and X. Xie: in Superalloy 718, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 545–51.
25. H.Y. Bor, C.G. Chao, and C.Y. Ma: Scripta Mater., 1998, vol. 38(2), pp. 329–35.10.1016/S1359-6462(97)00444-2 ↗
26. P. Ma and J. Zhu: Metallography, 1986, vol. 19, pp. 115–18.10.1016/0026-0800(86)90011-X ↗
27. C.T. Sims: J. Met., 1966, vol. 18, pp. 1119–30.
28. H.E. Gresham: Met. Mater., 1969, vol. 3, p. 433.