An Investigation on the Interface in a NiTi Short-Fiber-Reinforced 6061 Aluminum Composite by Transmission Electron Microscope
Source abstract
Abstract
It has already been demonstrated that NiTi shape-memory alloy fiber-reinforced composites show enhanced mechanical properties by adding a compressive stress to the matrix when the shape-memory effect is activated. The bonding quality between NiTi fiber and the matrix directly affects the stress transfer across the interface, through which the novel functionality of the smart composite is achieved. In the present study, the interface in a NiTi short-fiber-reinforced 6061 aluminum matrix has been investigated by transmission electron microscopy and energy dispersive spectroscopy. Three layers at the interface between NiTi fiber and 6061 aluminum alloy matrix have been found and characterized, i.e., Al3Ti with DO22 ordered structure near the NiTi fiber, Al9FeNi with Al9Co2 (or Al9Fe2) type ordered structure near the Al alloy matrix, and Mg-O layer with 20 nm in thickness between Al3Ti and Al9FeNi layers. The potential effects of these layers on the mechanical properties of the composite are discussed. Evidence indicates that extensive diffusion from both NiTi fiber and Al alloy matrix occurred during the fabrication of the composite at 570 °C to 580 °C within 20 to 30 minutes. The minor elements in the matrix could be the major elements at the interface. By selecting the chemical composition of the Al alloy matrix, it is possible to control the chemical composition at the interface and further control the mechanical properties of the composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Composite Structure Analysis and Optimization · Aeroelasticity and Vibration Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. E.T.F. Chau, C.M. Friend, D.M. Allen, J. Hora, J.R. Webster: Mater. Sci. Eng. A, 2006, vol. 438, pp. 589–9210.1016/j.msea.2006.02.201 ↗
2. L.H. Yahia, A. Manceur, P. Chaffraix: Bio-Med. Mater. Eng., 2006, vol. 16 (2), pp. 101–18
3. R.P. Kusy: Angle Orthodontist, 2002, vol. 72 (6), pp. 501–12
4. J. Abadie, N. Chaillet, C. Lexcellent: J. Intell. Mater. Sys. Struct., 2004, vol. 15 (8), pp. 601–0910.1177/1045389X04042472 ↗
5. W. Huang: Mater. Des., 2002, vol. 23 (1), pp. 11–1910.1016/S0261-3069(01)00039-5 ↗
6. A. Camposeo, F. Fuso, M. Allegrini, E. Arimondo, A. Tuissi: Appl. Phys. A, 2004, vol. 79 (4–6), pp. 1141–4310.1007/s00339-004-2687-x ↗
7. W.D. Armstrong, T. Lorentzen, P. Brondsted, P.H. Larsen: Acta Mater., 1998, vol. 46 (10), pp. 3455–6610.1016/S1359-6454(98)00020-2 ↗
8. Y. Furuya: J. Intell. Mater. Sys. Struct., 1996, vol. 7 (5), pp. 321–3010.1177/1045389X9600700313 ↗
9. C.A. Rogers: Smart Materials, Structures, and Mathematical Issues, Virginia Polytechnic Institute and State University, Blacksburg, VA, 1988, pp. 17–28
10. C.A. Rogers, C. Liang, D.K. Barker: Smart Materials, Structures, and Mathematical Issues, Virginia Polytechnic Institute and State University, Blacksburg, VA, 1988, pp. 39–62
11. A. Shimamoto: Trans. ASME, 2002, vol. 124 (10), pp. 390–96
12. G. Murasawa, K. Tohgo, H. Ishii: J. Compos. Mater., 2004, vol. 38 (5), pp. 399–41610.1177/0021998304040553 ↗
13. E. Umezaki: J. Intell. Mater. Sys. Struct., 2006, vol. 17 (12), pp. 1115–2010.1177/1045389X06065234 ↗
14. C. Kim: Int. J. Mod. Phys. B, 2006, vol. 20 (25–27), pp. 3733–3810.1142/S0217979206040283 ↗
15. Y.J. Zheng, J. Schrooten, L.S. Cui: Intermetallics, 2005, vol. 13 (3–4), pp. 305–0810.1016/j.intermet.2004.07.027 ↗
16. G.A. Porter, P.K. Liaw, T.N. Tiegs, K.H. Wu: JOM, 2000, vol. 52 (10), pp. 52–5610.1007/s11837-000-0084-2 ↗
17. K. Hamada, J.H. Lee, K. Mizuuchi, M. Taya, K. Inoue: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1127–3510.1007/s11661-998-1022-0 ↗
18. A. Shimamito, H.T. Zhao, H. Abe: Int. J. Fatigue, 2004, vol. 26, pp. 533–4210.1016/j.ijfatigue.2003.09.005 ↗
19. C.L. Xie, M. Hailat, X. Wu, G. Newaz, M. Taya, B. Raju: J. Eng. Mater. Technol., 2007, vol. 129 (1), pp. 69–7610.1115/1.2400271 ↗
20. G.A. Porter, P.K. Liaw, T.N. Tiegs, K.H. Wu: Mater. Sci. Eng. A, 2001, vol. 314 (1–2), pp. 186–9310.1016/S0921-5093(00)01915-8 ↗
21. G.A. Porter, P.K. Liaw, T.N. Tiegs, K.H. Wu: Scripta Mater., 2000, vol. 43 (12), pp. 1111–1710.1016/S1359-6462(00)00539-X ↗
22. J.K. Lee: Compos. Struct., 2003, vol. 60, pp. 255–6310.1016/S0263-8223(03)00014-X ↗
23. K. Mizuuchi, K. Inoue, K. Harnada, M. Sugioka, M. Itami, M. Fukusumi, M. Kawahara: Mater. Sci. Eng. A, 2004, vol. 367, pp. 343–4910.1016/j.msea.2003.10.286 ↗
24. P. Stadelmann: Ultramicroscopy, 1987, vol. 21, pp. 131–4610.1016/0304-3991(87)90080-5 ↗
25. Binary Alloy Phase Diagrams, Thaddeus B. Massalski, ed., ASM INTERNATIONAL, Metals Park, OH, 1986
26. P. Villars, A. Prince, H. Okamoto: Handbook of Ternary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1995
27. W.B. Pearson: A Handbook of Lattice Spacings and Structure of Metals and Alloys, Pergamon Press, New York, NY, 1958–1967, vol. 1–2
28. P. Sahu: Intermetallics, 2006, vol. 14, pp. 180–8810.1016/j.intermet.2005.05.004 ↗
29. A.R. Daud, N. Saheb: Jpn. J. Appl. Phys. Part 2—Lett., 2002, vol. 41 (4A), pp. L405–L40710.1143/JJAP.41.L405 ↗
30. R.E. Watson, M. Weinert: Phys. Rev. B, 1998, vol. 58 (10), pp. 5981–8810.1103/PhysRevB.58.5981 ↗
31. W. Lin, A.J. Freeman: Phys. Rev. B, 1992, vol. 45 (1), pp. 61–6910.1103/PhysRevB.45.61 ↗
32. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworths, London, 1976
33. Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, P. Villars and L.D. Calvert, eds., ASM, Metals Park, OH, 1985
34. P. Budberg, A. Price: in Ternary Alloys, vol. 5, G. Petzow, G. Effenberg, eds., VCH, Weinheim, 1992, pp. 309–23
35. K. Mizuuchi: JOM, 2000, vol. 10, pp. 26–3110.1007/s11837-000-0079-z ↗