journal article·2014-07Open access

Time-Dependent Crack Growth Thresholds of Ni-Base Superalloys

Kwai S. Chan

Abstract

A micromechanical model has been developed for predicting the time-dependent crack growth threshold and its variability by considering oxide formation or cavity formation ahead of an elastic crack subjected to a sustained load at a stress intensity factor, K, at elevated temperatures in air. It is demonstrated that stress relaxation associated with a volume-expansion process such as the formation of creep cavities or oxides with a positive transformation strain can induce residual stresses at the tip of the elastic crack. The near-tip residual stresses must be overcome by the external load, thereby instigating a growth threshold, K th, for the onset of time-dependent crack growth. This micromechanical framework provides the basis for developing appropriate predictive models for the time-dependent crack growth thresholds associated with several damage processes, including (1) oxidation-assisted intergranular crack growth, (2) K-controlled creep crack growth along an intergranular path, and (3) stress corrosion cracking. The micromechanical threshold models have been utilized to predict the time-dependent crack growth thresholds of a variety of Ni-base superalloys. The material parameters that contribute to the variability of the time-dependent crack growth thresholds have been identified and related to variations of mixed oxides or creep cavities formed near the crack tip. A size scale effect is also predicted for the transformation toughening phenomenon, which is largest at or below K th but diminishes at increasing K levels above the threshold. Finally, the micromechanical models are utilized to identify means for suppressing time-dependent crack growth in Ni-base alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (98)

Show source-provided references
1. K. Sadananda and P. Shahinian: in Micro and Macro Mechanics of Crack Growth, K. Sadananda, B.B. Rath, and D.J. Michel, eds., Metallurgical Society of AIME, Warrendale, PA, 1981, pp. 119–30.
2. J.P. Pedron and A. Pineau: Mater. Sci. Eng., Vol. 56, 1982, pp. 143-56.10.1016/0025-5416(82)90167-7 ↗
3. S. Floreen and R. Raj: Flow and Fracture at Elevated Temperature. ASM, Warrendale, PA, 1983, pp. 383-404.
4. A. Diboine and A. Pineau: Fatigue Fract., Eng. Mater. Struct., Vol. 10, 1987, pp. 141-51.10.1111/j.1460-2695.1987.tb01156.x ↗
5. E. Andrieu, R. Cozar, and A. Pineau: in Superalloys Metallurgy & Applications, E.A. Loria, ed., ASM, Pittsburgh, PA, 1989, pp. 241–47.10.7449/1989/Superalloys_1989_241_256 ↗
6. D.A. Woodford: Energy Mater., Vol. 1, No. 1, 2006, pp. 59-79.10.1179/174892306X99679 ↗
7. R. Molins, J.-C. Chassaigne, and E. Andrieu: in Superalloys Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1997, pp. 655–64.10.7449/1997/Superalloys_1997_655_664 ↗
8. M. Gao, D.J. Dwyer, and R.P. Wei: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, 1994, pp. 581–92.10.7449/1994/Superalloys_1994_581_592 ↗
9. R.P. Wei and Z. Huang: Mater. Sci. Eng., Vol. A336, 2002, pp. 209-14.10.1016/S0921-5093(01)01957-8 ↗
10. K.S.Chan, M.P. Enright, and J.P. Moody: ASME Turbo Expos 2013, Paper GT 2013-95057, San Antonio, TX, 3–7 June 2013.
11. A. Arioka, T. Yamada, T. Migamoto, and T. Terachi: Corrosion, 2011, vol. 67 (3), pp. 035006-1–035006-18.10.5006/1.3563640 ↗
12. S. Floreen: Metall. Trans. A, Vol. 17A, 1975, pp. 1741-49.10.1007/BF02642302 ↗
13. S. Floreen: in Fatigue, Environment and Temperature Effects, J.J. Burke and V. Weiss, ed., Plenum Press, New York, 1983, pp. 145–62.
14. K. Sadananda and P. Shahinian: Mater. Sci., Eng., Vol. 43, 1980, pp. 159-68.10.1016/0025-5416(80)90143-3 ↗
15. K. Sadananda and P. Shahinian: in Creep-Fatigue Environment Interactions, R.M. Pelloux and N.S. Stoloff, eds., TMS-AIME, 1979, pp. 86–111.
16. K. Sadananda and P. Shahinian, J. Eng. Mater. Technol., Vol. 100, 1978, pp. 381-87.10.1115/1.3443507 ↗
17. K. Sadananda and P. Shahinian: Metall. Trans. A, 1983, vol. 16A, pp. 1467–80.10.1007/BF02664831 ↗
18. P. Shahinian and K. Sadananda: J. Eng. Mater. Technol., Vol. 101, 1979, pp. 225-30.10.1115/1.3443681 ↗
19. R.P. Wei, and J.D. Landes: Mater. Res. Stand., Vol. 44(46), July 1969, pp. 25-27.
20. R.H. Van Stone and D.C. Slavik: Fatigue and Fracture Mechanics: 31st Volume, ASTM STP 1389, G.R. Halford and J.P. Gallagher, eds., ASTM, West Conshohocken, PA, 2000, pp. 405–26.
21. K.S. Chan, M.P. Enright, J.P. Moody, B. Hocking, and S.H.K. Fitch: J. Eng. Gas Turbine Power, 2012, vol. 134, p. 122501.10.1115/1.4007321 ↗
22. P.C. Paris and F. Erdogan (1963) Trans. ASME J. Basic Eng. Ser. D 85(3), 528–34.10.1115/1.3656900 ↗
23. K.S. Chan, M.P. Enright, J.P. Moody, and S.H.K. Fitch: Metall. Mater. Trans. A, 2013, DOI:10.1007/S11661-013-1971-9 (published on line).10.1007/S11661-013-1971-9 ↗
24. W. Hoffelner: Mater. Sci. Technol., Vol. 3, 1987, pp. 765-70.10.1179/mst.1987.3.9.765 ↗
25. M.Y. Nazmy and S. Wuthrich: Mater. Sci. Eng., Vol. 61, 1983, pp. 119-25.10.1016/0025-5416(83)90194-5 ↗
26. P. Valerio, M. Gao, and R.P. Wei: Scripta. Metall. Mater., Vol. 30, 1994, pp. 1269-74.10.1016/0956-716X(94)90257-7 ↗
27. T. Connolley, M.J. Starink, and P.A.S. Reed: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 435–44.10.7449/2000/Superalloys_2000_435_444 ↗
28. D.M. Knowles and D.W. Hunt: Metall. Mater. Trans. A, Vol 33A, 2002, pp. 3165-72.10.1007/s11661-002-0302-3 ↗
29. T.P. Gabb, J. Telesman, P.T. Kantzos, J.W. Smith, and P.F. Browning: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 269–74.10.7449/2004/Superalloys_2004_269_274 ↗
30. M. Olszta, D. Schreiber, L. Thomas, and S. Bruemmer: Adv. Mater. Process., 2012, 170(4), pp. 17–21.
31. J. Panter, B. Viguier, J.-M. Cloue, M. Foucault, P. Combrade, and E. Andrieu: J. Nucl. Mater., Vol. 348, 2006, pp. 213-21.10.1016/j.jnucmat.2005.10.002 ↗
32. G.C. Sih: Int. J. Fract. Mech., Vol. 2, 1966, pp. 628-31.10.1007/BF00184559 ↗
33. D. Broek: Elementary Engineering Fracture Mechanics, Sijthoff & Noordhoff, Alphen aan den Riju, 1978, pp. 70-71.
34. J.D. Eshelby, Proc. R. Soc., Vol. A241, 1957, pp. 376-96.10.1098/rspa.1957.0133 ↗
35. S.-Q. Shi and M.P. Puls: J. Nucl. Mater., Vol. 208, 1994, pp. 232-42.10.1016/0022-3115(94)90332-8 ↗
36. R.M. McMeeking and A.G. Evans: J. Am. Ceram. Soc., Vol 65, 1982, pp.242-46.10.1111/j.1151-2916.1982.tb10426.x ↗
37. B. Budiansky, J.C. Amazigo, and A.G. Evans (1988) J. Mech. Phys. Solids, Vol. 26, pp. 167-87.10.1016/S0022-5096(98)90003-5 ↗
38. R.J. Dimelfi and W.D. Nix: Int. J. Fract., Vol. 13, 1977, pp. 341-48.10.1007/BF00040148 ↗
39. D.A. Miller and R. Pilkington: Metall. Trans. A, Vol 11A, 1980, pp. 177-80.10.1007/BF02700454 ↗
40. P. Hancock: in Vacancies ’76, R.E. Smallman and J.E. Harris, eds., The Metals Society, London, 1976, pp. 215–22.
41. J. Telesman, P. Kantzos, J. Gayda, P.J. Bonacuse, and A. Prescenzi: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 215–24.10.7449/2004/Superalloys_2004_215_224 ↗
42. I.P. Vasatis and R.M. Pelloux:Metallurgical Transactions A, Vol 16A, August 1985, pp. 1515-20.10.1007/BF02658683 ↗
43. R.M. Pelloux and J.S. Huang: Creep–Fatigue Environment Interactions, R.M. Pelloux and N.S. Stoloff, eds., The Metallurgical Society of AIME, New York, 1980.
44. K.R. Bain and R.M. Pelloux: in 5th International Symposium on Superalloys, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich, eds., Metallurgical Society of AIME, Warrendale, PA, 1984.
45. J. Tsang, R.M. Kearsey, P. Au, S. Oppenheimer, and E. McDevitt: Can. Metall. Q., Vol. 50, No. 3, 2011, pp. 222-31.10.1179/1879139511Y.0000000015 ↗
46. M.Y. Nazmy and C. Würthrich: Mater. Sci. Eng., Vol 61, 1983, pp. 119-25.10.1016/0025-5416(83)90194-5 ↗
47. J.R. Groh and D.P.Mourer: in Superalloys 2004, K. A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 101–08.10.7449/2004/Superalloys_2004_101_108 ↗
48. R. Cozar and A. Pineay: Metall. Trans., Vol. 4, 1973, pp. 47-59.10.1007/BF02649604 ↗
49. K. Kusabiraki, H. Komatsu, and S. Ikeuchi: Metall. Mater. Trans. A, Vol. 29A, 1998, pp. 1169–74.10.1007/s11661-998-0243-6 ↗
50. J.C. Zhao, V. Ravikumar, and A.M. Beltran: Metall. Mater. Trans. A, Vol. 32A, 2001, pp. 1271–82.10.1007/s11661-001-0217-4 ↗
51. T. Sourmail: Mater. Sci. Technol., Vol. 17, 2001, pp. 1-14.10.1179/026708301101508972 ↗
52. T.M. Pollock and S. Tin: J. Propuls. Power, Vol. 22, 2006, pp. 361-74.10.2514/1.18239 ↗
53. J. Laigo, F. Tancret, R. Le Gall, and J. Furtado:, Adv. Mater. Res., Vols. 15-17, 2007, pp. 702-07.10.4028/www.scientific.net/AMR.15-17.702 ↗
54. W. Acchar and C. A. Cairo: Mater. Res., Vol. 9, 2006, pp. 171-74.10.1590/S1516-14392006000200011 ↗
55. K. Koji, N. Yokotani, and Y. Umakoshi: Mater. Sci. Forum, Vol. 512, 2006, pp. 67-72.10.4028/www.scientific.net/MSF.512.67 ↗
56. K. Hirota, K. Mitani, M. Yoshinak, and O. Yamaguchi, Mater. Sci. Eng. A, Vol. 399, 2005, pp. 154-60.10.1016/j.msea.2005.02.062 ↗
57. G.A. Young, T.E. Capobianco, M.A. Penik, B.W. Morris, and J.J. McGee: Weld. J., Vol. 87, 2008, pp. 31s-43s.
58. J.D. Rigney and J.J. Lewandowski: Mater. Sci. Eng. A, Vol. 149, 1992, pp. 143-51.10.1016/0921-5093(92)90375-B ↗
59. W.W. Gerberich, W.M. Mook, C.B. Carter, and R. Ballarini: Int. J. Fract., 2007, vol. 148, pp. 109–15.10.1007/s10704-008-9177-7 ↗
60. S. Musikant: What Every Engineer Should Know About Ceramics, Marcel Dekker, Inc., 1991, pp. 102–05.
61. T. Chudoba, N. Schwarzer, and F. Richter: Surf. Coat. Technol., Vol. 127, 2000, pp. 9–17.10.1016/S0257-8972(00)00552-1 ↗
62. D. Tromans and J.A. Meech: Miner. Eng., Vol. 15, 2002, pp. 1027-41.10.1016/S0892-6875(02)00213-3 ↗
63. J.A. Crawford: J. Appl. Phys., Vol. 35, 1964, pp. 2413-18.10.1063/1.1702871 ↗
64. P. Thompson, D.E. Cox, and J.B. Hastings: J. Appl. Crystallogr., Vol. 20, 1987, pp. 79-83.10.1107/S0021889887087090 ↗
65. H. Berger, H. Tang, and F. Levy: J. Cryst. Growth, Vol. 130, 1993, pp. 108-12.10.1016/0022-0248(93)90842-K ↗
66. C. Yan and D. Yue: Adv. Mater., Vol. 20, 2008, pp. 1055-58.10.1002/adma.200701752 ↗
67. D.R. Lide: CRC Handbook of Chemistry and Physics, 79th ed., CRC, Boca Raton, FL, 1998/1999.
68. T. Bredow and A.R. Gerson: Phys. Rev. B., Vol. 61, 2000, pp. 5194-201.10.1103/PhysRevB.61.5194 ↗
69. X.S. Du, S. Hak, T. Hibma, O.C. Rogojanu, and B. Struth: J. Cryst. Growth, Vol. 293, 2006, pp. 228-32.10.1016/j.jcrysgro.2006.05.013 ↗
70. R. Guillament, J. Lopitaux, B. Hannoyer, and M. Lenglet: J. Phys. IV Colloque C9, 1993, vol. 3, pp. 349–56.
71. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, Wiley, New York, 1976, p. 8.
72. W.-B. Zhang, Y.-H. Deng, Y-L. Hu, K-L Han, and B-Y. Tang: Science Direct, Solid State Communications, vol. 142, 2007, pp. 6–9.10.1016/j.ssc.2007.01.045 ↗
73. S.K. Sahoo, K. Agarwal, A.K. Singh, B.G. Polke, and K.C. Raha: Int. J. Eng. Sci. Technol., Vol. 2, No. 8, 2010, pp. 118-26.
74. M. Krzyzanowski. J.H. Beynon, and D.C.J. Farrugia: Technology and Engineering, VHC Wiley Verlag, Weinheim, 2010, p. 174.
75. T. Amano, M. Okazaki, T. Takezawa, A. Shiino, M. Takeda, T. Onishi, K. Seto, A. Ohkubo, and T. Shishido: Mater. Sci. Forum, 2006, vols. 522–523, pp. 469–76.10.4028/www.scientific.net/MSF.522-523.469 ↗
76. T.P. Gabb, J. Telesman, B. Hazel, and D.P. Mourer: J. Mater. Eng. Perform., Vol. 19, No. 1, 2010, pp. 77-89.10.1007/s11665-009-9399-5 ↗
77. Material data provided through direct telecommunications and in Probabilistic Design for Rotor Integrity (PDRI) Interim Report 9, Southwest Research Institute, March 4, 2010. The tests were performed by PWA and funded under FAA Grant 05-G-005.
78. R.H. Van Stone, P.G. Gooden and D.D. Krueger: Final Report, AFWAL-TR-88-4146, Wright-Patterson Air Force Base, OH, 1988.
79. T. Nicholas and T. Weerassoriya: in Fracture Mechanics ASTM STP 905, J.H. Underwood, R. Chait, C.W. Smith, D.P. Wilhem, W.R. Andrews, and J.C. Newman, eds., American Society for Testing and Materials, Philadelphia, p. 155.
80. S.S. Kim, S.J. Choe, and K.S. Shin: Met. Mater., Vol. 4, No. 1, 1998, pp. 15-23.10.1007/BF03026060 ↗
81. C.D. Liu, Y.F. Han, M.G. Yan, and M.C. Charturved: in Superalloys 178, 625 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA 1991, pp. 537-548.10.7449/1991/Superalloys_1991_537_548 ↗
82. K.R. Bain and R.M. Pelloux: Metallurgical Transactions A, Vol. 15A, February 1984, pp. 381-88.10.1007/BF02645123 ↗
83. J. Gayda, T.P. Gabb, and T.V. Miner: Low Cycle Fatigue, ASTM STP 942, H.D. Solomon, G.R. Halford, L.R. Kaisand, and B.N. Leis, eds., American Society for Testing and Materials, Philadelphia, PA, 1988, pp. 293-309.
84. W. Hoffelner: Metall. Trans. A, Vol. 13A, July 1982, pp. 1245-55.10.1007/BF02645508 ↗
85. W. Carpenter, B.D.-J. Kang, and K.M. Chang: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1997, pp. 579–688.
86. H.E. Evans, H.Y. Li and P. Bowen: Scripta. Mater., Vol. 69, 2013, pp. 179-82.10.1016/j.scriptamat.2013.03.026 ↗
87. N.B. Pilling and R.E. Bedworth: J. Int. Met., Vol. 29, 1923, pp. 539-91.
88. H.E. Collins: Proceedings of the International Symposium on Structural Stability in Superalloys, M.J. Donachie, ed., TMS, Warrendale, PA, 1968, pp. 171–98.10.7449/1968/Superalloys_1968_171_198 ↗
89. K.-M. Chang, M.F. Henry, and M.G. Benz (1990) JOM, 42(12), pp. 29-35.10.1007/BF03220467 ↗
90. K.-M. Chang: in Superalloys 718, 625 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1991, pp. 447–56.10.7449/1991/Superalloys_1991_447_456 ↗
91. T.P. Gabb, J. Gayda, J. Telesman, and A. Garg: in Superalloy 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Farhmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 121–30.10.7449/2008/Superalloys_2008_121_130 ↗
92. J. Telesman, T.P. Gabb, A. Garg, P. Bonacuse, and J. Gayda: in Superalloy 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Farhmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 807–16.10.7449/2008/Superalloys_2008_807_816 ↗
93. J.M. Larson and S. Foreen, Metall. Trans. A., Vol. 8A, 1977, pp. 51-55.10.1007/BF02677263 ↗
94. H.J. Wu and A.K. Kowl: Adv. Perform. Mater., 4, 1997, pp. 409-20.10.1023/A:1008648628507 ↗
95. S. Xu, X.-J. Wu, A.K. Koul, and J.I. Dickson: Metall. Mater. Trans. A, 1999, Vol. 30A, pp. 1039-45.10.1007/s11661-999-0156-z ↗
96. G.J. Koel and P.J. Gellings: Oxid. Met., Vol. 5, 1972, pp. 185-203.10.1007/BF00609658 ↗
97. J. Kitaguchi, H.T. Li, H.E. Evans, R.G. Ding, I.P. Jones, G. Baxter, P. Bowen, Acta Mater., Vol. 61, 2013, pp. 1968-81.10.1016/j.actamat.2012.12.017 ↗
98. K.S.Chan, M.P.Enright, and J.P.Moody: J. Eng. Gas Turbines Power, Vol. 136, February 2014, 22502, 1-8.