Influence of Heat Input on Microstructure and Toughness Properties in Simulated CGHAZ of X80 Steel Manufactured Using High-Temperature Processing
Source abstract
Abstract
To determine and demonstrate the weldability of high-Nb high-temperature processed (HTP) steels and provide extremely valuable information for future line pipe steel design and general steel manufacture, in the current study the toughness in simulated coarse-grained heat-affected zone (CGHAZ) of an X80 grade steel manufactured using HTP was evaluated. The simulated CGHAZs subjected to thermal cycles with various heat inputs (HIs) (0.8 to 5.0 kJ/mm) were produced using a Gleeble 3500 simulator. The microstructures and corresponding mechanical properties were investigated by means of optical microscopy, scanning electron microscopy, electron backscatter diffraction, hardness testing, and Charpy V-notch (CVN) testing. The microstructural examination shows that the simulated CGHAZs consisted of a bainite-dominant microstructure and relatively low amount (<2 pct) of martensite–austenite (M–A) constituent. The prior austenite grain size was controlled to be 45 to 55 µm at HIs of 0.8 to 3.5 kJ/mm, and remarkably increased to 85 µm at an HI of 5 kJ/mm. The results of CVN testing suggest that superior toughness can be achieved in the studied range of HIs (0.8 to 5 kJ/mm). This is thought to be associated with the combined effects of bainitic microstructure and low M–A fraction as well as comparatively fine austenite grain size in the studied CGHAZs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Y. Weng, H. Dong and Y. Gan: Innovative Steels for Low Carbon Economy, in Advanced Steels, Springer Berlin Heidelberg, Berlin, 2011.
2. J. Morris: Sci., 2008, vol. 320, pp. 1022-3.10.1126/science.1158994 ↗
3. I. Takeuchi, J. Fujino, A. Yamamoto, and S. Okaguchi: Pipes Pipelines Int., 2003, vol. 48, pp. 33-43.
4. L. Briottet, R. Batisse, G. de Dinechin, P. Langlois, and L. Thiers: Int. J. Hydrogen Energy, 2012, vol. 37 (11), pp. 9423-30.10.1016/j.ijhydene.2012.02.009 ↗
5. P. Venton: In X80 Pipeline Cost Workshop, Hobart, Australia, 2002, pp. 13–23.
6. F. Barbaro, L. Fletcher, C. Dinnis, J. Piper, and J.M. Gray: Proc. 18th Joint Technical Meeting on Pipeline Research, San Francisco, 2011, pp. 1–21.
7. A.D. Batte, P.J. Boothby, and A.B. Rothwell: Proc. Int. Symposium Niobium, 2001, pp. 931–58.
8. C. Shang and X. Wang: Proceedings of the International Seminar on Welding of High Strength Pipeline Steel, TMS, Araxá, Brazil, 2011, pp. 435–53.
9. A.M. Guo, S.R. Li, J. Guo, P.H. Li, Q.F. Ding, K.M. Wu, and X.L. He: Mater. Charact., 2008. vol. 59, pp. 134-9.10.1016/j.matchar.2006.11.028 ↗
10. A. De Ardo, J. Gray, and L. Meyer: Niobium-Proceedings of the International Symposium, 1984.
11. J.M. Gray: Niobium science and technology, Niobium, 2002, vol. 2001: pp. 889-906.
12. H. Mohrbacher: Mater. Sci. Forum, 2007, vol. 539-543, pp. 4470-5.
13. S. Vervynckt, K. Verbeken, P. Thibaux, M. Liebeherr, and Y. Houbaert: ISIJ Int., 2009, vol. 49 (6): pp. 911-20.10.2355/isijinternational.49.911 ↗
14. K. Hulka, P. Bordignon, and J.M. Gray: International Seminar The HTP Steel Project, Araxá, Brazil, 2003, Technical Report No. 1.
15. B. Ouaissa, J. Brózda, I. Spawalnictwa, M. Pérez-Bahillo, S. Bremer, and W. de Waele: 17th Biennial Joint Technical Meeting on Pipeline Research, Milan, 2009, pp. 11–15.
16. K. Hulka and J.M. Gray: Proc. Int. Symposium Niobium, 2001, pp. 587–612.
17. D.G. Stalheim: Iron Steel, 2005, vol. 40(S): pp. 699–704.
18. A. Das: Mater. Manuf. Process, 2010, vol. 25 (1-3): pp. 14-9.10.1080/10426910903202427 ↗
19. L. Zheng, and J.Y. Fu: Iron and Steel, 2006, vol. 41: pp. 1–10.
20. L. Feng, X. Gao, and C. Qiu: Hot Working Technol., 2010, vol. 6: pp. 20.
21. B. Hwang, Y.M. Kim, S.H. Lee, N.J. Kim, and S.S. Ahn: Metall. Mater. Trans. A, 2005, vol. 36A: pp. 725-39.10.1007/s11661-005-1004-4 ↗
22. C.W. Li, W. Wang, T. Han, B. Han, and L.Y. Li: J. Mater. Sci., 2011, vol. 46: pp. 727-33.10.1007/s10853-010-4803-y ↗
23. Y. You, C.J. Shang, W.J. Nie, and S. Sundaresa: Mater. Sci. Eng. A, 2012, vol. 558: pp. 692-701.10.1016/j.msea.2012.08.077 ↗
24. X.W. Chen, G.Y. Qiao, X.L. Han, X. Wang, F.R. Xiao, and B. Liao: Mater. Des., 2014, vol. 53: pp. 888-901.10.1016/j.matdes.2013.07.037 ↗
25. L. Zheng, S. Gao, C.G. Zhang, B. Zhang, and Y.F. Li: Welded Pipe and Tube, 2009, vol. 32: pp. 25-9.
26. F.S. LePera: J. Met. 1980, vol. 32, pp. 38–39.10.1007/BF03354553 ↗
27. C.W. Li, Y. Wang, and T. Han: Mater. Sci. Technol., 2012, vol. 28: pp. 92-4.10.1179/1743284711Y.0000000002 ↗
28. W.A. Bruce and M.A. Boring: Proc. 6th Int. Pipeline Conf., Calgary, Canada, 2006, pp. 283–96.10.1115/IPC2006-10299 ↗
29. G. Krauss, and S.W. Thompson: ISIJ Int., 1995, vol. 35: pp. 937-45.10.2355/isijinternational.35.937 ↗
30. B. Bramfitt, and J. Speer: Metall. Trans. A, 1990, vol. 21: pp. 817-29.10.1007/BF02656565 ↗
31. H.K. Sung, S.Y. Shin, W. Cha, K. Oh, S. Lee, and N.J. Kim: Mater. Sci. Eng. A, 2011, vol. 528: pp. 3350-7.10.1016/j.msea.2011.01.031 ↗
32. K. Shibata, and K. Asakura: ISIJ Int., 1995, vol. 35: pp. 982-91.10.2355/isijinternational.35.982 ↗
33. S.Y. Shin, K.J. Woo, B. Hwang, S. Kim, and S. Lee: Metall. Mater. Trans. A, 2009, vol. 40: pp. 867–76.10.1007/s11661-008-9764-2 ↗
34. O. Akselsen, J. Solberg, and O. Grong: Scand. J. Metall., 1988, vol. 17: pp. 194-200.
35. Z.X. Zhu, M. Marimuthu, L. Kuzmikova, H.J. Li, F. Barbaro, L. Zheng, M.Z. Bai, and C. Jones: Sci. Technol. Weld. Join., 2013, vol. 18: pp. 45-51.10.1179/1362171812Y.0000000071 ↗
36. M. Suehiro: ISIJ Int., 1998, vol. 38: pp. 547-52.10.2355/isijinternational.38.547 ↗
37. N. Yurioka, M. Okumura, T. Kasuya, and H.J.U. Cotton: Met. Constr., 1987, vol. 19: pp. 217–23.
38. E. Essadiqi, and J.J. Jonas: Metall. Trans. A, 1988, vol. 19: pp. 417-26.10.1007/BF02649255 ↗
39. B.B. Vynokur: Mater. Sci., 1996, vol. 32: pp. 144-57.10.1007/BF02538896 ↗
40. Y.Q. Zhang, H.Q. Zhang, J.F. Li, and W.M. Liu: J. Iron Steel Res. Int., 2009, vol. 16: pp. 73-80.10.1016/S1006-706X(10)60014-3 ↗