Effect of Zn Concentration on the Microstructure and Mechanical Properties of Al-Mg-Si-Zn Alloys Processed by Gravity Die Casting
Source abstract
Abstract
Abstract The microstructure and mechanical properties of Al-8.1Mg-2.6Si-(0.08 to 4.62)Zn alloys (in wt pct) have been investigated by the permanent mold casting process. X-ray diffraction analysis shows that theτ-Mg32(Al, Zn)49phase forms when the Zn content is 1.01 wt pct. With higher Zn contents of 2.37 and 3.59 wt pct, theη-MgZn2andτ-Mg32(Al, Zn)49phases precipitate in the microstructure, and theη-MgZn2phase forms when the Zn content is 4.62 wt pct. Metallurgical analysis shows that theη-MgZn2andτ-Mg32(Al, Zn)49phases strengthen the Al-8.1Mg-2.6Si-(0.08 to 4.62)Zn alloys. After solutionizing at 510 °C for 180 minutes and aging at 180 °C for 90 minutes, theη′-MgZn2phase precipitates in theα-Al matrix, which significantly enhances the mechanical properties. Addition of 3.59 wt pct Zn to the Al-8.1Mg-2.6Si alloy with heat treatment increases the yield strength from 96 to 280 MPa, increases the ultimate tensile strength from 267 to 310 MPa, and decreases the elongation from 9.97 to 1.74 pct.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. K. Alan: Die Casting Metallurgy, 1st ed., Butterworths & Co., London, UK, 1982, pp. 10-14.
2. D.M. Stefanescu: Casting, Vol. 15, ASM Handbook, ASM International, OH, USA, 2008, pp. 585-611.
3. J. Hirsch: Mater. Trans., 2011, vol. 52, pp. 818-824.10.2320/matertrans.L-MZ201132 ↗
4. L. Ceschini, A. Morri, A. Morri, G. Pivetti: Mater. Des., 2011, vol. 32, pp. 1367-1375.10.1016/j.matdes.2010.09.014 ↗
5. I. Polmear: Light Alloys, 4th ed., Butterworth-Heinemann, Oxford, UK, 2005, pp. 220-226.
6. J. G. Kaufman, E. L. Rooy: Aluminum Alloy, Castings, Properties, Processes, and Applications, ASM International, OH, USA, 2004, pp. 13-57.10.31399/asm.tb.aacppa.9781627083355 ↗
7. P. Ouellet, F. H. Samuel: J. Mater. Sci., 1999, vol. 34, pp. 4671-4697.10.1023/A:1004645928886 ↗
8. A. Wiengmoon, J.T.H. Pearceb, T. Chairuangsric, S. Isodad, H. Saitoe, H. Kuratae: Micron, 2013, vol. 45, pp. 32-36.10.1016/j.micron.2012.10.009 ↗
9. R. Jahn, W.T. Donlon, and J.E. Allison: Proc. Symp. TMS Annu. Meet. Automot. Alloys 1999, 1999, pp. 247-64.10.1002/9781118787601.ch21 ↗
10. J.Y. Hwang, R. Banerjee, H.W. Doty, M.J. Kaufman: Acta Mater., 2009, vol. 57, pp. 1308-1317.10.1016/j.actamat.2008.11.021 ↗
11. R.K. Mishra, G.W. Smith, W.J. Baxter, A.K. Sachdev, V. Franetovic: J. Mater. Sci., 2001, vol. 36, pp. 461-468.10.1023/A:1004888831537 ↗
12. K. Wen, Y. Fan, G. Wang, L. Jin, X. Li, Z. Li, Y. Zhang, B. Xiong: Mater. Des., 2016, vol. 101, pp. 16-23.10.1016/j.matdes.2016.03.150 ↗
13. X. Yang, J.H. Chen, J.Z. Liu, F. Qin, J. Xie, C.L. Wu: J. Alloys Compd., 2014, vol. 610, pp. 69-73.10.1016/j.jallcom.2014.04.185 ↗
14. B. Li, Q. Pan, C. Chen, H. Wu, Z. Yin: J. Alloys Compd., 2016, vol. 664, pp. 553-564.10.1016/j.jallcom.2016.01.016 ↗
15. S.-S. Shin, K.-M. Lim, I.-M. Park: J. Alloys Compd., 2016, vol. 671, pp. 517-526.10.1016/j.jallcom.2016.02.127 ↗
16. S. Ji, F. Yan, Z. Fan: Mater. Sci. Eng., A, 2015, vol. 626, pp. 165-174.10.1016/j.msea.2014.12.019 ↗
17. S. Ji, F. Yan, Z. Fan: Light Metals, 2016, pp. 207-10. https://doi.org/10.1007/978-3-319-48251-410.1007/978-3-319-48251-4 ↗
18. F. Yan, W. Yang, S. Ji, Z. Fan: Mater. Chem. Phys., 2015, vol. 167, pp. 88-96.10.1016/j.matchemphys.2015.10.014 ↗
19. S. Ji, F. Yan, Z. Fan: Mater. Sci. Forum, 2015, vol. 828-829, pp. 9-14.10.4028/www.scientific.net/MSF.828-829.9 ↗
20. L. Yan, Y. Zhang, X. Li, Z. Li, F. Wang, H. Liu, and B. Xiong: Prog. Nat. Sci. Mater. Int., 2014, vol. 24, pp. 97-100.10.1016/j.pnsc.2014.03.003 ↗
21. X. Ding, H. Cui, J.X. Zhang, H.X. Li, M.X. Guo, Z. Lin, L.Z. Zhuang, J.S. Zhang: Mater. Des., 2015, vol. 65, pp. 1229-1235.10.1016/j.matdes.2014.09.086 ↗
22. C.A. Aliravci, M. Ö. Pekgüleryüz: CALPHAD: Comput. Coupling Phase Diagrams Thermochem., 1988, vol. 22, pp. 147-155.10.1016/S0364-5916(98)00020-0 ↗
23. S. Kumar, K.A.Q. O’Reilly: Mater. Charact., 2016, vol. 120, pp. 311-322.10.1016/j.matchar.2016.09.017 ↗
24. S. Belmares-Perales, A.A. Zaldívar-Cadena: Mater. Sci. Eng., B, 2010, vol. 174, pp. 191-195.10.1016/j.mseb.2010.03.032 ↗
25. J. Song, Z. Wang, Y. Huang, A. Srinivasan, F. Beckmann, K.U. Kainer, N. Hort: Mater. Des., 2015, vol. 87, pp. 157-170.10.1016/j.matdes.2015.08.026 ↗
26. Y. Wang, Q. Wang, G. Wu, Y. Zhu, W. Ding: Mater. Lett., 2002, vol. 57, pp. 929-934.10.1016/S0167-577X(02)00898-4 ↗
27. W. Yang, S. Ji, M. Wang, Z. Li: J. Alloys Compd., 2014, vol. 610, pp. 623-629.10.1016/j.jallcom.2014.05.061 ↗
28. M.C. Carroll, P.I.G., M.J. Mills, G.S. Daehn and B.R. Dunba: Scr. Mater., 2000, vol. 42, pp. 335-340.10.1016/S1359-6462(99)00349-8 ↗
29. C. Meng, D. Zhang, H. Cui, L. Zhuang, J. Zhang: J. Alloys Compd., 2014, vol. 617, pp. 925-932.10.1016/j.jallcom.2014.08.099 ↗
30. W. Yang, L. Liu, J. Zhang, S. Ji: Mater. Sci. Eng., A, 2017, vol. 682, pp. 85-89.10.1016/j.msea.2016.11.028 ↗
31. M.I. Pech-Canul, A. Bautista-Hernandez, M. Salazar-Villanueva, S. Valdez: Mater. Des., 2013, vol. 44, pp. 325-330.10.1016/j.matdes.2012.07.072 ↗
32. S. Valdez, J. Genesca, B. Campillo, O. Flores, R. Perez, J.A. Juarez-Islas: Mater. Lett., 2008, vol. 62, pp. 1139-1142.10.1016/j.matlet.2007.08.001 ↗
33. X. Dong, Y. Zhang, S. Ji: Mater. Sci. Eng., A, 2017, vol. 700, pp. 291-300.10.1016/j.msea.2017.06.005 ↗
34. L. K. Berg, J. Gjønnes, V. Hansen, X. Z. Li, M. Knutson-Wedel, G. Waterloo, D. Schryvers, L. R. Wallenberg: Acta Mater., 2001, vol. 49, pp. 3443-3451.10.1016/S1359-6454(01)00251-8 ↗
35. X. Zhao, C. Chen, F. Chen: Mater. Lett., 2017, vol. 188, pp. 95-98.10.1016/j.matlet.2016.11.107 ↗
36. P. Priya, D.R. Johnson, M.J.M. Krane: Comput. Mater. Sci., 2017, vol. 139, pp. 273-284.10.1016/j.commatsci.2017.08.008 ↗
37. S. Zhang, W. Hu, R. Berghammer, G. Gottstein: Acta Mater., 2010, vol. 58, pp. 6695-6705.10.1016/j.actamat.2010.08.034 ↗