journal article·2018-01Open access

Enhanced Densification of PM Steels by Liquid Phase Sintering with Boron-Containing Master Alloy

Maheswaran Vattur Sundaram, Kumar Babu Surreddi, Eduard Hryha, Angela Veiga, Sigurd Berg, Fransisco Castro, Lars Nyborg

Abstract

Abstract Reaching high density in PM steels is important for high-performance applications. In this study, liquid phase sintering of PM steels by adding gas-atomized Ni-Mn-B master alloy was investigated for enhancing the density levels of Fe- and Mo- prealloyed steel powder compacts. The results indicated that liquid formation occurs in two stages, beginning with the master alloy melting (LP-1) below and eutectic phase formation (LP-2) above 1373 K (1100 °C). Mo and C addition revealed a significant influence on the LP-2 temperatures and hence on the final densification behavior and mechanical properties. Microstructural embrittlement occurs with the formation of continuous boride networks along the grain boundaries, and its severity increases with carbon addition, especially for 2.5 wt pct of master alloy content. Sintering behavior, along with liquid generation, microstructural characteristics, and mechanical testing revealed that the reduced master alloy content from 2.5 to 1.5 wt pct (reaching overall boron content from 0.2 to 0.12 wt pct) was necessary for obtaining good ductility with better mechanical properties. Sintering with Ni-Mn-B master alloy enables the sintering activation by liquid phase formation in two stages to attain high density in PM steels suitable for high-performance applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. W. B. James: Int. J. Powder Metall. Powder Technol., 1985, vol. 21, pp. 163–82.
2. U. Engström, C. Lindberg, and J. Tengzelius: Powder Metall., 1992, vol. 35, pp. 67–73.10.1179/pom.1992.35.1.67 ↗
3. H. G. Rutz and F. G. Hanejko: Adv. Powder Metall. Part. Mater., 1994, vol. 5, p. 117.
4. W. B. James: Int. J. Powder Metall., 2005, vol. 41, pp. 31–36.
5. RM German (1985) Liquid Phase Sintering, Springer Science & Business Media, Berlin.10.1007/978-1-4899-3599-1 ↗
6. B. A. James: Powder Metall., 1985, vol. 28, pp. 121–30.10.1179/pom.1985.28.3.121 ↗
7. DS Madan, RM German (1984) Mod. Dev. Powder Metall. 15: 441–54.
8. PK Liao and KE Spear (1992) ASM Handbook. ASM International, Ohio.
9. M.W. Wu: Metall. Mater. Trans. A, 2014, vol. 46, pp. 467–75.
10. A. Molinari, T. Pieczonka, J. Kazior, S. Gialanella, and G. Straffelini: Metall. Mater. Trans. A, 2000, vol. 31, pp. 1497–1506.10.1007/s11661-000-0160-9 ↗
11. M. Sarasola, T. Gómez-Acebo, and F. Castro: Powder Metall., 2005, vol. 48, pp. 59–67.10.1179/003258905X37558 ↗
12. J. Karwan-Baczewska and M. Rosso: Powder Metall., 2001, vol. 44, pp. 221–27.10.1179/003258901666374 ↗
13. Klein J. (1975) Preliminary Investigation of Liquid Phase Sintering in Ferrous Systems, California Univ., Berkeley (USA). Lawrence Berkeley Lab, Berkeley.10.2172/7351509 ↗
14. M. Sarasola, T. Gómez-Acebo, and F. Castro: Acta Mater., 2004, vol. 52, pp. 4615–22.10.1016/j.actamat.2004.06.018 ↗
15. M. Selecká, A. Šalak, and H. Danninger: J. Mater. Process. Technol., 2003, vol. 143, pp. 910–15.10.1016/j.jmatprotec.2003.10.001 ↗
16. M. Momeni, C. Gierl, H. Danninger, and A. Avakemian: Powder Metall., 2012, vol. 55, pp. 54–64.10.1179/1743290111Y.0000000020 ↗
17. E. Dudrova, M. Selecka, R. Bures, and M. Kabátová: ISIJ Int., 1997, vol. 37, pp. 59–64.10.2355/isijinternational.37.59 ↗
18. D. Krecar, V. Vassileva, H. Danninger, and H. Hutter: Anal. Bioanal. Chem., 2004, vol. 379, pp. 605–9.
19. V Vassileva, H Danninger, S Strobl, and C Gierl: Euro PM2007. 2007, 1: 53–58.
20. M. Marucci, A. Lawley, R. Causton, and S. Saritas: Proc. Powder Metall. Congr. Exhib. Orlando, Florida, USA, 2002.
21. Z. Xiu, A. Salwén, X. Qin, F. He, and X. Sun: Powder Metall., 2003, vol. 46, pp. 171–74.10.1179/003258903225005411 ↗
22. M. Sarasola, S. Sainz, and F. Castro: Euro PM 2005. 2005, pp. 349–56.
23. C. Tojal, T. Gómez-Acebo, and F. Castro: Mater. Sci. Forum. 2007, pp. 661–64.10.4028/0-87849-419-7.661 ↗
24. M. Skałoń, M. Hebda, K. Sulikowska, and J. Kazior: Mater. Des., 2016, vol. 108, pp. 462–69.10.1016/j.matdes.2016.06.129 ↗
25. M. Momeni, C. Gierl, H. Danninger, I. U. Mohsin, and A. Arvand: Powder Metall., 2012, vol. 55, pp. 212–21.10.1179/1743290111Y.0000000011 ↗
26. C. Gierl, I. U. Mohsin, and H. Danninger: Powder Metall. Prog., 2008, vol. 8, pp. 135–1.
27. P. Orth, A. Bouvier, and R. Ratzi: Proc. Euro PM 2004. 2004, pp. 307–12.
28. R. Oro, M. Campos, C. Gierl-Mayer, H. Danninger, and J.M. Torralba: Metall. Mater. Trans. A, 2015, vol. 46, pp. 1349–59.10.1007/s11661-014-2707-1 ↗
29. A. Veiga: Development of High Performance Nickel or Boron PM Steels Respectively Obtained after Solid State and Liquid Phase Sintering, PhD thesis, University of Navarra, 2015.
30. J-O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
31. N. A. Gokcen: J. Phase Equilibria, 1991, vol. 12, pp. 313–21.10.1007/BF02649919 ↗
32. PK Liao, KE Spear (1991) ASM Handbook. ASM International, Ohio.
33. B. Cao, X. Wang, H. Cui, and X. He: J. Univ. Sci. Technol. Beijing Miner. Metall. Mater. (Eng Ed), 2002, vol. 9, pp. 347–51.
34. W. Wang, S. Zhang, and X. He: Acta Metall. Mater., 1995, vol. 43, pp. 1693–99.10.1016/0956-7151(94)00347-K ↗
35. M.W. Wu and W.Z. Cai: MATEC Web Conf. 2015, p. 1012.
36. J. Liu, A. Cardamone, T. Potter, R. M. German, and F. J. Semel: Powder Metall., 2000, vol. 43, pp. 57–61.10.1179/pom.2000.43.1.57 ↗
37. M.W. Wu and W.Z. Cai: Mater. Charact., 2016, vol. 113, pp. 90–97.10.1016/j.matchar.2016.01.016 ↗