Weibull Modulus Estimated by the Non-linear Least Squares Method: A Solution to Deviation Occurring in Traditional Weibull Estimation
Source abstract
Abstract
Abstract The Maximum Likelihood method and the Linear Least Squares (LLS) method have been widely used to estimate Weibull parameters for reliability of brittle and metal materials. In the last 30 years, many researchers focused on the bias of Weibull modulus estimation, and some improvements have been achieved, especially in the case of the LLS method. However, there is a shortcoming in these methods for a specific type of data, where the lower tail deviates dramatically from the well-known linear fit in a classic LLS Weibull analysis. This deviation can be commonly found from the measured properties of materials, and previous applications of the LLS method on this kind of dataset present an unreliable linear regression. This deviation was previously thought to be due to physical flaws (i.e., defects) contained in materials. However, this paper demonstrates that this deviation can also be caused by the linear transformation of the Weibull function, occurring in the traditional LLS method. Accordingly, it may not be appropriate to carry out a Weibull analysis according to the linearized Weibull function, and the Non-linear Least Squares method (Non-LS) is instead recommended for the Weibull modulus estimation of casting properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. N. R. Green and J. Campbell, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 1993, vol. 173, pp. 261-266.10.1016/0921-5093(93)90226-5 ↗
2. W. D. Griffiths and N. W. Lai, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 2007, vol. 38A, pp. 190-196.10.1007/s11661-006-9048-7 ↗
3. M. Emamy, A. Razaghian, S. Kaboli and J. Campbell, Mater. Sci. Technol. 2010, vol. 26, pp. 149-156.10.1179/174328408X372092 ↗
4. W. Weibull: J. Appl. Mech. Trans. ASME 1951, vol. 18, pp. 293–97.
5. A. Khalili and K. Kromp, J. Mater. Sci. 1991, vol. 26, pp. 6741-6752.10.1007/BF02402669 ↗
6. L. Butikofer, B. Stawarczyk and M. Roos, Dent. Mater. 2015, vol. 31, pp. E33-E50.10.1016/j.dental.2014.11.014 ↗
7. M. Tiryakioglu and D. Hudak, J. Mater. Sci. 2007, vol. 42, pp. 10173-10179.10.1007/s10853-007-2060-5 ↗
8. D. F. Wu, J. C. Zhou and Y. D. Li, J. Mater. Sci. 2006, vol. 41, pp. 5630-5638.10.1007/s10853-006-0344-9 ↗
9. J. A. Meganck, M. J. Baumann, E. D. Case, L. R. McCabe and J. N. Allar, J. Biomed. Mater. Res. Part A 2005, vol. 72A, pp. 115-126.10.1002/jbm.a.30213 ↗
10. A. Kishimoto, K. Koumoto, H. Yanagida and M. Nameki, Eng. Fract. Mech. 1991, vol. 40, pp. 927-930.10.1016/0013-7944(91)90253-W ↗
11. J. Espinoza-Cuadra, G. Garcia-Garcia and H. Mancha-Molinar, Materials & Design 2007, vol. 28, pp. 1038-1044.10.1016/j.matdes.2005.10.013 ↗
12. B. G. Eisaabadi, P. Davami, S. K. Kim, N. Varahram, Y. O. Yoon and G. Y. Yeom, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 2012, vol. 558, pp. 134-143.10.1016/j.msea.2012.07.101 ↗
13. H. Zahedi, M. Emamy, A. Razaghian, M. Mahta, J. Campbell and M. Tiryakioglu, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 2007, vol. 38A, pp. 659-670.10.1007/s11661-006-9068-3 ↗
14. O. Keles, R. E. Garcia and K. J. Bowman, Acta Materialia 2013, vol. 61, pp. 7207-7215.10.1016/j.actamat.2013.08.025 ↗
15. M. Tiryakioglu and J. Campbell, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 2010, vol. 41A, pp. 3121-3129.10.1007/s11661-010-0364-6 ↗
16. H. Rinne: The Weibull Distributin: A Handbook. (CRC Press, U.S., 2009).
17. M. Tiryakioglu, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 2015, vol. 46A, pp. 270-280.10.1007/s11661-014-2610-9 ↗
18. R. H. Doremus, Journal of Applied Physics 1983, vol. 54, pp. 193-198.10.1063/1.331731 ↗
19. M. Tiryakioglu, D. Hudak and G. Oekten, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 2009, vol. 527, pp. 397-399.10.1016/j.msea.2009.08.014 ↗
20. R.A. Fisher, Philosophical Transactions of the Royal Society A 1922, vol. 222, pp. 309–368.10.1098/rsta.1922.0009 ↗
21. Edgeworth and Francis Y., Journal of the Royal Statistical Society 1908, vol. 71, pp. 651–678.10.2307/2339378 ↗
22. G. N. Murshudov, A. A. Vagin and E. J. Dodson, Acta Crystallogr. Sect. D-Biol. Crystallogr. 1997, vol. 53, pp. 240-255.10.1107/S0907444996012255 ↗
23. N. Nakamura, K. Horie and Y. Iijima, Mokuzai Gakkaishi 2000, vol. 46, pp. 32-36.
24. M. Bantle, K. Kolsaker and T. M. Eikevik, Dry. Technol. 2011, vol. 29, pp. 1161-1169.10.1080/07373937.2011.574242 ↗
25. B. Bergman, Journal of Materials Science Letters 1986, vol. 5, pp. 611-614.10.1007/BF01731525 ↗
26. D. F. Wu, J. C. Zhou and Y. D. Li, J. Eur. Ceram. Soc. 2006, vol. 26, pp. 1099-1105.10.1016/j.jeurceramsoc.2005.01.044 ↗
27. C. Nyahumwa, N. R. Green and J. Campbell, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 2001, vol. 32, pp. 349-358.10.1007/s11661-001-0266-8 ↗
28. X. Dai, X. Yang, J. Campbell and J. Wood, Mater. Sci. Technol. 2004, vol. 20, pp. 505-513.10.1179/026708304225012387 ↗
29. G. E. Bozchaloei, N. Varahram, P. Davami and S. K. Kim, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 2012, vol. 548, pp. 99-105.10.1016/j.msea.2012.03.097 ↗
30. X. Teng, H. Mae and Y. Bai, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 2010, vol. 527, pp. 4169-4176.10.1016/j.msea.2010.03.033 ↗