Study and Applications of Dynamic Resistance Profiles During Resistance Spot Welding of Coated Hot-Stamping Steels
Source abstract
Abstract
This work compares the role of press hardened steel coating type (Al-Si and GA) on resistance spot welding by analyzing the dynamic resistance curves measured during the weld cycles of the respective materials. It was seen that the dynamic resistance profiles for GA- and Al-Si-coated steels are similar. But the GA specimens exhibited higher resistance than Al-Si-coated specimens in the as-received condition, while the Al-Si-coated specimens exhibited higher resistance after hot stamping. From the early stages of the dynamic resistance profiles, data were obtained and applied for computing the values of components of resistances associated with the different coatings since each coating exhibits characteristic value at the early stages. The results revealed that at the start of the welding cycle, the resistance of the electrode/sheet interface was significantly higher than that of the faying surface or the bulk resistance regardless of whether the steel was Al-Si- or GA-coated. The possible uses of these resistance values in studying welding current requirement and electrode tip life were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. X. Hu, G. Zou, S. J. Dong, M. Y. Lee, J. P. Jung and Y. Zhou: Materials Transactions, 2010, vol. 51, no.12, pp. 2236-2242.10.2320/matertrans.M2010239 ↗
2. W. Tan, Y. Zhou and H. W. Kerr: Metallurgical and Materials Transaction A, 2002, vol. 33A, pp. 2667-2676.10.1007/s11661-002-0388-7 ↗
3. W. F. Savage, E. F. Nippes and F. A. Wassell: Welding Research Supplement, 1978, vol. 43, pp. 43s-50s.
4. S. A. Gedeon, C. D. Sorensen, K. T. Ulrich and T. W. Eagar: Welding Research Supplement, December 1987, vol. 8, pp. 378s-385s.
5. S. Bhattacharya and D. R. Andrews: Weld Metal Fabr., 1974, vol. 42, pp. 296-301.
6. G. Banerjee, T. K. Pal, N. Bandyopadhyay and D. Bhattacharjee: Corrosion Engineering, Science and Technology, 2011, vol. 46, no.1, pp. 64-69.10.1179/147842208X388744 ↗
7. N. Harlin, T. B. Jones and J. D. Parker: Journal of Materials Processing Technology, 2003, vol. 143–144, pp. 448-453.10.1016/S0924-0136(03)00447-3 ↗
8. N. A. Freytag: Welding Journal, 1965, vol. 44, pp. 145-156.
9. S. A. Gedeon and T. W. Eagar: Metallurgical and Materials Transaction B, 1986, vol. 17B, pp. 887-901.10.1007/BF02657152 ↗
10. C. Ma, S. D. Bhole, D. L. Chen, A. Lee, E. Biro and G. Boudreau: Science and Technology of Welding and Joining, 2006, vol. 11, no.4, pp. 480-487.10.1179/174329306X120895 ↗
11. R. Holm: Electric Contacts Theory and Applications, 4th ed., p.2, Spriger-Verlag, Berlin Heidelberg, 1967.10.1007/978-3-662-06688-1 ↗
12. D. W. Dickinson, Franklin, J. E. and A. Stanya: Welding Research Supplement, June 1980, vol. 59, no.6, pp. 170s-176s.
13. A. R. Marder: Progress in Materials Science, 2000, vol. 45, pp. 191-271.10.1016/S0079-6425(98)00006-1 ↗
14. M. Windmann, A. Röttger and W. Theisen: Surface and Coatings Technology, 2014, vol. 246, pp. 17-25.10.1016/j.surfcoat.2014.02.056 ↗
15. S. J. Grauer, E. J. F. R. Caron, N.L. Chester, M. A. Wells and K. J. Daun: Journal of Materials Processing Technology, 2015, vol. 216, pp. 89-94.10.1016/j.jmatprotec.2014.09.001 ↗
16. I. I. Danzo, Y. Houbaert and K. Verbeken: Surface and Coatings Technology, 2014, vol. 251, pp. 15-20.10.1016/j.surfcoat.2014.03.063 ↗
17. S. Kobayashi and T. Yakou: Materials Science and Engineering A, 2002, vol. 338, pp. 44-53.10.1016/S0921-5093(02)00053-9 ↗
18. R. Brandt and G. Neuer: International Journal of Thermophysics, 2007, vol. 28, no.5, pp. 1429-1446.10.1007/s10765-006-0144-0 ↗
19. S. Jazbec, P. Kozelj, S. Vrtnik, Z. Jaglicic, P. Popcevic, J. Ivkov, D. Stanic, A. Smontara, M. Feuerbacher and J. Dolinsek: Physical Review B, 2012, vol. 86, no.6, pp.1-8.10.1103/PhysRevB.86.064205 ↗
20. M. R. Hajaligol, S.C. Deevi, V. K. Sikka and C. R. Scorey: Materials Science and Engineering A, 1998, vol. 258, pp. 249-257.10.1016/S0921-5093(98)00941-1 ↗
21. A. C. Lilly, S. C. Deevi and Z. P. Gibbs: Materials Science and Engineering A, 1998, vol. 258, pp. 42-49.10.1016/S0921-5093(98)00915-0 ↗
22. Y. B. Pithawalla, M. S. El Shall and S. C. Deevi: Intermetallics, 2000, vol. 8, pp. 1225-1231.10.1016/S0966-9795(00)00076-5 ↗
23. W. Tan, Y. Zhou, H. W. Kerr and S. Lawson: J. Phys. D: Appl. Phys., 2004, vol. 37, pp. 1998–2008.10.1088/0022-3727/37/14/017 ↗
24. A. Tsalf: Combined properties of conductors, Elsevier Scientific, New York, 1981.
25. H. Elzanaty: International Journal of Research in Engineering and Technology, 2014, vol. 2, no.7, pp.49-54.
26. N. T. Williams and J. D. Parker: International Materials Review, 2004, vol. 49, no.2, pp. 77-108.10.1179/095066004225010541 ↗