Microstructures and Mechanical Performance of Plasma-Nitrided Al0.3CrFe1.5MnNi0.5 High-Entropy Alloys
Source abstract
Abstract
This study investigates the effect of plasma nitriding at 798 K (525 °C) on microstructures and the mechanical performance of Al0.3CrFe1.5MnNi0.5 high-entropy alloys (HEAs) obtained using different cast and wrought processing. All the alloys can be well nitride, with a thickness of around 80 μm, and attain a peak hardness level around Hv 1300 near the surface. The main nitride phases are CrN, AlN, and (Mn, Fe)4N. Those of the substrates are bcc, fcc, Al-, and Ni-rich B2 precipitates, and ρ phase. Their relative amounts depend on the prior processing and also change under the heat treatment during nitriding. The formation of ρ phase during nitriding could in-situ harden the substrate to attain the suitable level required for wear applications. This gives the advantage in simplifying the processing for making a wear-resistance component or a mold since austenitizing, quench hardening, and tempering required for steels such as SACM and SKD steels are no longer required and final finishing can be accomplished before nitriding. Nitrided Al0.3CrFe1.5MnNi0.5 samples have much better wear resistance than un-nitrided ones by 49 to 80 times and also exhibit superior adhesive wear resistance to conventional nitrided alloys: nitriding steel SACM-645 (AISI 7140), 316 stainless steel, and hot-mold steel SKD-61 (AISI H13) by 22 to 55 times depending on prior processing. The superiority is due to the fact that the present nitrided alloys possess a much thicker highly hardened layer than the conventional alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. ASM Handbook, vol. 1, Properties and Selection: Irons, Steels, and High Performance Alloys, ASM INTERNATIONAL, Metals Park, OH, 1990.
2. ASM Handbook, vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM INTERNATIONAL, Metals Park, OH, 1990.
3. C.T. Liu and J.O. Stiegler: ASM Handbook, vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM INTERNATIONAL, Metals Park, OH, 1990, pp. 913–42.10.31399/asm.hb.v02.a0001102 ↗
4. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303.10.1002/adem.200300567 ↗
5. S. Ranganathan: Curr. Sci., 2003, vol. 85, pp. 1404–06.
6. P.K. Huang, J.W. Yeh, T.T. Shun, and S.K. Chen: Adv. Eng. Mater., 2004, vol. 6, pp. 74–78.10.1002/adem.200300507 ↗
7. J.W. Yeh: Ann. Chim.-Sci. Mater., 2006, vol. 31, pp. 633–48.10.3166/acsm.31.633-648 ↗
8. C.Y. Hsu, J.W. Yeh, S.K. Chen, and T.T. Shun: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1465–69.10.1007/s11661-004-0254-x ↗
9. C.J. Tong, Y.L. Chen, S.K. Chen, J.W. Yeh, T.T. Shun, C.H. Tsau, S.J. Lin, and S.Y. Chang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 881–93.10.1007/s11661-005-0283-0 ↗
10. C.J. Tong, M.R. Chen, S.K. Chen, J.W. Yeh, T.T. Shun, S.J. Lin, and S.Y. Chang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1263–71.10.1007/s11661-005-0218-9 ↗
11. J.M. Wu, S.J. Lin, J.W. Yeh, S.K. Chen, Y.S. Huang, and H.C. Chen: Wear, 2006, vol. 261, pp. 513–19.10.1016/j.wear.2005.12.008 ↗
12. H.Y. Chen, C.W. Tsai, C.C. Tung, J.W. Yeh, T.T. Shun, C.C. Yang, and S.K. Chen: Ann. Chim.-Sci. Mater., 2006, vol. 31, pp. 685–95.10.3166/acsm.31.685-698 ↗
13. G.Y. Ke, S.K. Chen, T. Hsu, and J.W. Yeh: Ann. Chim.-Sci. Mater., 2006, vol. 31, pp. 669–84.10.3166/acsm.31.669-684 ↗
14. Y.J. Zhou, Y. Zhang, Y.L. Wang, and G.L. Chen: Mater. Sci. Eng. A, 2007, vol. 454–455, pp. 260–65.10.1016/j.msea.2006.11.049 ↗
15. X.F. Wang, Y. Zhang, Y. Qiao, and G.L. Chen: Intermetallics, 2007, vol. 15, pp. 357–62.10.1016/j.intermet.2006.08.005 ↗
16. Y.J. Zhou, Y. Zhang, Y.L. Wang, and G.L. Chen: Appl. Phys. Lett., 2007, vol. 90, p. 181904.10.1063/1.2734517 ↗
17. Y.J. Zhou, Y. Zhang, F.J. Wang, and G.L. Chen: Appl. Phys. Lett., 2008, vol. 92, pp. 241917.10.1063/1.2938690 ↗
18. W.Y. Tang, M.H. Chuang, H.Y. Chen, and J.W. Yeh: Adv. Eng. Mater., 2009, vol. 11, pp. 788–94.10.1002/adem.200900135 ↗
19. ASM Handbook: Surface Hardening of Steel, ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 257–461.
20. A.M. Staines and T. Bell: Thin Solid Films, 1981, vol. 86, pp. 201–11.10.1016/0040-6090(81)90289-3 ↗
21. Y. Sun and T. Bell: Mater. Sci. Eng., A, 1991, vol. 140, pp. 419–34.10.1016/0921-5093(91)90458-Y ↗
22. ASM Handbook, 10th ed., ASM INTERNATIONAL, Metals Park, OH, 1991, vol. 4, pp. 263–64.
23. K.-E. Thelning: Steel and Its Heat Treatment: Bofors Handbook, Butterworth and Co., London, 1975, pp. 395–97.
24. C.T. Lynch: Handbook of Materials Science, CRC Press, Cleveland, OH, 1974.
25. F.R. Boer, R. Boom, W.C.M. Mattens, A.R. Miedema, and A.K. Niessen: Cohesion in Metals, North-Holland, Amsterdam, 1988.
26. J.M. O’Brien and D. Goodman: ASM Handbook, vol. 4, Heat Treating, ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 420–24.
27. C.H. Knerr, T.C. Rose, and J.H. Filkowski: ASM Handbook, vol. 4, Heat Treating, ASM INTERNATIONAL, Materials Park, OH, 1991, vol. 4, pp. 387–409.
28. A.K. Sinha: ASM Handbook, vol. 4, Heat Treating, ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 437–47.
29. H. Kato, T.S. Eyre, and B. Ralph: Surf. Eng., 1994, vol. 10, pp. 65–75.10.1179/sur.1994.10.1.65 ↗