journal article·2012-12Open access

The Sintering, Sintered Microstructure and Mechanical Properties of Ti-Fe-Si Alloys

Y. F. Yang, S. D. Luo, G. B. Schaffer, M. Qian

Abstract

A systematic study has been conducted of the sintering, sintered microstructure and tensile properties of a range of lower cost Ti-Fe-Si alloys, including Ti-3Fe-(0-4)Si, Ti-(3-6)Fe-0.5Si, and Ti-(3-6)Fe-1Si (in wt pct throughout). Small additions of Si (≤1 pct) noticeably improve the as-sintered tensile properties of Ti-3Fe alloy, including the ductility, with fine titanium silicides (TiSi) being dispersed in both the α and β phases. Conversely, additions of >1 pct Si produce coarse and/or networked TiSi silicides along the grain boundaries leading to predominantly intergranular fracture and, hence, poor ductility, although the tensile strength continues to increase because of the reinforcement by TiSi. Increasing the Fe content in the Ti-xFe-0.5/ 1.0Si alloys above 3 pct markedly increases the average grain size and changes the morphology of the α-phase phase to much thinner and more acicular laths. Consequently, the ductility drops to<1 pct. Si reacts exothermically with Fe to form Fe-Si compounds prior to the complete diffusion of the Fe into the Ti matrix during heating. The heat thus released in conjunction with the continuous external heat input melts the silicides leading to transient liquid formation, which improves the densification during heating. No Ti-TiFe eutectoid was observed in the as-sintered Ti-Fe-Si alloys. The optimum PM Ti-Fe-Si compositions are determined to be Ti-3Fe-(0.5-1.0)Si.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. D.C. Li, H. Liu, and D.L. Zhou: Titanium Smelting Technologies, Chemical Industry Press, Beijing, China, 2009, pp. 209–14.
2. M. Qian: Int. J. Powder Metall., 2010, vol. 46 (5), pp. 29–44.
3. H. Nakajima, K. Yusa, and Y. Kondo: Scripta Mater., 1996, vol. 34, pp. 249–53.10.1016/1359-6462(95)00511-0 ↗
4. Z.Z. Fang: Int. J. Powder Metall., 2010, vol. 46, pp. 9–17.
5. D.B. Lee, K.B. Park. H.W. Jeong, and S.E. Kim: Mater. Sci. Eng. A., 2002, vol. 328 pp. 161–68.10.1016/S0921-5093(01)01670-7 ↗
6. TIMETAL Datasheets, TIMETAL 10-2-3, http://www.timet.com.
7. S. Murakami, K. Ozaki, K. Ono, and Y. Itsumi: R&D Kobe Steel Engineering Reports, 2010, vol. 60 pp. 37–41.
8. TIMETAL Datasheets, TIMETAL 54M, http://www.timet.com.
9. W. Wei, Y. Liu, K. Zhou, and B. Huang: Powder Metall., 2003, vol. 46, pp. 246–50.10.1179/003258903225005295 ↗
10. Y.F. Yang, S.D. Luo, G.B. Schaffer, and M. Qian: Mater. Sci. Eng. A., 2011, vol. 528, pp. 6719–26.10.1016/j.msea.2011.05.041 ↗
11. J.F. Murdocki and C.J. Mcharguet: Acta Metall., 1968, vol. 16, pp. 493–500.10.1016/0001-6160(68)90123-5 ↗
12. B.Y. Chen, K.S. Hwang, and K.L. Ng: Mater. Sci. Eng. A., 2011, vol. 528, pp. 4556–63.10.1016/j.msea.2011.02.092 ↗
13. H. Kyogoku, S. Komatsu, K. Shinohara, H. Jinushi, and T. Toda: J. Jpn. Soc. Powder Metall., 1994, vol. 41, pp. 1075–79.10.2497/jjspm.41.1075 ↗
14. H. Kyogoku, S. Komatsu, I. Tsuchitori, and T. Toda: J. Jpn. Soc. Powder Metall., 1995, vol. 42, pp. 1052–56.10.2497/jjspm.42.1052 ↗
15. P.G. Esteban, E.M. Ruiz-Navas, and E. Gordo: Mater. Sci. Eng. A., 2010, vol. 527, pp. 5664–69.10.1016/j.msea.2010.05.026 ↗
16. P.G. Esteban, L. Bolzoni, E.M. Ruiz-Navas, and E. Gordo: Powder Metall., 2011, vol. 54, pp. 242–52.10.1179/174329009X457063 ↗
17. Y. Liu, L.F. Chen, H.P. Tang, C.T. Liu, B. Liu, and B.Y. Huang: Mater. Sci. Eng. A., 2006, vol. 418, pp. 25–35.10.1016/j.msea.2005.10.057 ↗
18. M.R. Winstone, R.D. Rawlings, and D.R.F. West: J. Less-Common Metals, 1975, vol. 39, pp. 205–17.10.1016/0022-5088(75)90195-2 ↗
19. P.J. Bania, A.J. Hutt, R.E. Adams, and W.M. Parris: Titanium ‘92’ Science and Technology, F.H. Froes and I. Caplan, eds., TMS, Warrendale, PA, 1993, p. 2787.
20. P.G. Allen, P.J. Bania, A.J. Hutt, and Y. Combres: Titanium ‘95’ Science and Technology, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., IOM, Cambridge, U.K., 1995, p. 1938.
21. Y.F. Yang, S.D. Luo, G.B. Schaffer, and M. Qian: Mater. Sci. Eng. A., 2011, vol. 528, pp. 7381–87.10.1016/j.msea.2011.06.029 ↗
22. R.M. German: Liquid Phase Sintering, Plenum Press, New York, NY, 1985, p. 162.10.1007/978-1-4899-3599-1 ↗
23. P. Boch and J. C. Niepce: Ceramic Materials: Processes, Properties and Applications, ISTE, London, U.K., 2007, p. 59.10.1002/9780470612415 ↗
24. R.N. Lumley and G.B. Schaffer: Scripta Mater., 1996, vol. 35, pp. 589–95.10.1016/1359-6462(96)00195-9 ↗
25. R.N. Lumley and G.B. Schaffer: Scripta Mater., 1998, vol. 39, pp. 1089–94.10.1016/S1359-6462(98)00278-4 ↗
26. I.M. Robertson and G.B. Schaffer: Powder Metall., 2010, vol. 53, pp. 27–33.10.1179/003258909X12502872942534 ↗