journal article·2005-02

Mechanical behavior of a cryomilled near-nanostructured Al-Mg-Sc alloy

Bing Q. Han, Enrique J. Lavernia, Farghalli A. Mohamed

Publisher page

Abstract

In the present study, the mechanical behavior of a cryomilled Al-7.5 pct Mg-0.3 pct Sc alloy was investigated at temperatures in the range of 298 to 648 K. The grain size of the as-extruded alloy was determined to be approximately 200 nm by transmission electron microscope (TEM) and X-ray diffraction (XRD) analysis. The data indicate that as a result of cryomilling, a supersaturated solid solution with high thermal stability was formed in the Al-Mg-Sc alloy. The high strength at room temperature was primarily attributed to three types of strengthening: grain size effect, solid solution hardening, and Orowan strengthening. The elevated temperature mechanical behavior of the Al-Mg-Sc alloy exhibits the following: (a) a strain-rate sensitivity, m, of less than 0.2; and (b) an activation energy, Q, that increases from 139 to 193 kJ/mol with increasing applied stress. An analysis of the experimental data at elevated temperatures shows that despite the fine-grained structure of the alloy, the deformation characteristics are not consistent with those arising from a superplastic deformation process that incorporates a threshold stress. On the other hand, the analysis suggests that the deformation characteristics agree with those associated with the transition in the creep behavior of Al-based solid solution alloys from that for the intermediate-stress region, where m=0.33 and Q=Q D (Q D is the activation energy for self-diffusion in Al), to that of the high-stress region, where m Q D .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. S.L. Semiatin, K.V. Jata, M.D. Uchic, P.B. Berbon, D.E. Matejezyk, and C.C. Bampton: Scripta Mater., 2001, vol. 44, pp. 395–400.10.1016/S1359-6462(00)00612-6 ↗
2. V.L. Tellkamp, A. Melmed, and E.J. Lavernia: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2335–43.10.1007/s11661-001-0207-6 ↗
3. B.Q. Han, Z. Lee, S.R. Nutt, E.J. Lavernia, and F.A. Mohamed: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 603–13.10.1007/s11661-003-0095-z ↗
4. K.L. Kendig and D.B. Miracle: Acta Mater., 2002, vol. 50, pp. 4165–75.10.1016/S1359-6454(02)00258-6 ↗
5. L.S. Toropova, D.G. Eskin, M.L. Kharakterova, and T.V. Dobatkina: Advanced Aluminum Alloys Containing Scandium: Structure and Properties, Gordon and Breach Science Publishers, 1998.
6. R.R. Sawtell and C.L. Jensen: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 421–30.10.1007/BF02782422 ↗
7. F. Zhou, S.R. Nutt, C.C. Bampton, and E.J. Lavernia: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1985–92.10.1007/s11661-003-0163-4 ↗
8. T.G. Nieh, L.M. Hsiung, J. Wadsworth, and R. Kaibyshev: Acta Mater., 1998, vol. 46, pp. 2789–800.10.1016/S1359-6454(97)00452-7 ↗
9. Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes, and T.G. Langdon: Acta Mater., 2000, vol. 48, pp. 3633–40.10.1016/S1359-6454(00)00182-8 ↗
10. T.G. Nieh, P.S. Gilman, and J. Wadsworth: Scripta Metall., 1985, vol. 19, pp. 1375–78.10.1016/0036-9748(85)90070-5 ↗
11. T.R. Bieler and A.K. Mukherjee: Mater. Sci. Eng., 1990, vol. A128, pp. 171–82.10.1016/0921-5093(90)90225-R ↗
12. K. Higashi, T. Okada, T. Mukai, S. Tanimura, T.G. Nieh, and J. Wadsworth: Scripta Metall. Mater., 1992, vol. 26, pp. 185–90.10.1016/0956-716X(92)90170-J ↗
13. D.J. Skinner, M.S. Zedalis, and P. Gilman: Mater. Sci. Eng., 1989, vol. A119, pp. 81–86.10.1016/0921-5093(89)90526-1 ↗
14. T. Hasegawa, T. Miura, T. Takahashi, and T. Yakou: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 902–08.10.2355/isijinternational.32.902 ↗
15. W.C. Porr and R.P. Gangloff: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 365–79.10.1007/BF02647982 ↗
16. Z.M. Yin, Q.L. Pan, Y.H. Zhang, and F. Jiang: Mater. Sci. Eng., 2000, vol. A280, pp. 151–55.10.1016/S0921-5107(99)00552-8 ↗
17. D.N. Seidman, E.A. Marquis, and D.C. Dunand: Acta Mater., 2002, vol. 50, pp. 4021–35.10.1016/S1359-6454(02)00201-X ↗
18. H.P. Klug and L. Alexander: X-ray Diffraction Procedures for Polycrystalline and Amorphous Materials, 2nd ed., John Wiley & Sons, New York, NY, 1974.
19. D.L. Zhang, T.B. Massalski, and M.R. Paruchuri: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 73–79.10.1007/BF02646676 ↗
20. C. Suryanarayana: Progr. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
21. F. Zhou, J. Lee, S. Dallek, and E.J. Lavernia: J. Mater. Res., 2001, vol. 16, pp. 3451–58.10.1557/JMR.2001.0474 ↗
22. H.R. Last and R.K. Garrett: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 737–45.10.1007/BF02648961 ↗
23. D. Hull and D.J. Bacon: Introduction to Dislocations, Pergamon Press, Oxford, UK, 1984.
24. T.S. Srivatsan, E.J. Lavernia, and F.A. Mohamed: Int. J. Powder Metall., 1990, vol. 26, pp. 321–34.
25. Metal Handbook, vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM INTERNATIONAL, Materials Park, OH, 1990.
26. J.S. Benjamin and R.D. Schelleng: Metall. Trans. A, 1981, vol. 12A, pp. 1827–32.10.1007/BF02643766 ↗
27. Y.W. Kim and L.R. Bidwell: Scripta Metall., 1982, vol. 16, pp. 799–802.10.1016/0036-9748(82)90231-9 ↗
28. Y.-W. Kim, W.M. Griffith, and F.H. Froes: JOM, 1985, vol. 37, pp. 27–33.10.1007/BF03257675 ↗
29. Y.-W. Kim: in Dispersion Strengthened Aluminum Alloys, Y.-W. Kim and W.M. Griffith, eds., TMS, Warrendale, PA, 1988, pp. 157–80.
30. H. Riedel: Fracture at High Temperature, Springer-Verlag, Berlin, 1987.10.1007/978-3-642-82961-1 ↗
31. P.K. Chaudhury, K.T. Park, and F.A. Mohamed: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2391–401.10.1007/BF02648859 ↗
32. F.A. Mohamed: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 261–78.10.1007/s11661-002-0088-3 ↗
33. A. Yousefiani and F.A. Mohamed: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1653–63.10.1007/s11661-998-0088-z ↗
34. F.A. Mohamed: Scripta Mater., 1998, vol. 38, pp. 457–63.10.1016/S1359-6462(97)00478-8 ↗
35. F.A. Mohamed and T.G. Langdon: Acta Metall., 1974, vol. 22, pp. 779–88.10.1016/0001-6160(74)90088-1 ↗
36. W.R. Cannon and O.D. Sherby: Metall. Trans., 1970, vol. 1, pp. 1030–32.10.1007/BF02811789 ↗
37. F.A. Mohamed: Mater. Sci. Eng., 1979, vol. 38, pp. 73–80.10.1016/0025-5416(79)90034-X ↗
38. P. Yavari and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 2181–96.10.1016/0001-6160(82)90139-0 ↗
39. K.L. Murty: Scripta Metall., 1973, vol. 7, p. 899.10.1016/0036-9748(73)90138-5 ↗