The effect of twinning on the work-hardening behavior and microstructural evolution of hafnium
Source abstract
Abstract
The work-hardening behavior of hexagonal-close-packed (hcp) metals, such as hafnium, is influenced by temperature, strain rate, chemistry, and texture. In the case of hafnium, while slip on the prism and pyramidal planes is dominant during deformation, the propensity of deformation twinning is known to increase with decreasing temperature and increasing strain rate. In this study, hafnium was prestrained quasi-statically in compression at liquid nitrogen temperature (77 K), creating a heavily twinned microstructure. The specimens were then reloaded in compression at room temperature (298 K). Yield stress, flow stress, and work-hardening behaviors of the prestrained specimens were higher than room-temperature compression test data typical of the as-annealed material. The microstructure of each specimen was characterized optically and using a transmission electron microscope (TEM). Texture was measured by neutron diffraction and the texture evolution due to twinning, and the interaction of slip with the twins was seen to lead to higher work-hardening rates and flow stresses in the cold prestrained specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. P.G. Partridge: Metall. Rev., 1967, vol. 12, pp. 169–94.10.1179/imr.1967.12.1.169 ↗
2. S.G. Song and G.T. Gray: Metall. Mater. Trans. A, 1995, vol 26A, pp. 2665–75.10.1007/BF02669423 ↗
3. G.C. Kaschner and G.T. Gray: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1997–2003.10.1007/s11661-000-0227-7 ↗
4. M.H. Yoo: Metall. Mater. Trans. A, 1981, vol. 12A, pp. 409–15.10.1007/BF02648537 ↗
5. C.S. Hartley and D.A. Jenkins: J. Met., 1980, vol. 32 (7), pp. 23–28.
6. G. Das and T.E. Mitchell: Metall. Trans., 1973, vol. 4, pp. 1405–13.10.1007/BF02644539 ↗
7. E. Cerreta and G.T. Gray, III: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1999–2011.10.1007/s11661-004-0149-x ↗
8. G. Subhash, G. Ravichandran, and B.J. Pletka: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1479–87.10.1007/s11661-997-0210-7 ↗
9. K.T. Ramesh: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 927–35.10.1007/s11661-002-0162-x ↗
10. A.K. Singh and R.A. Schwarzer: Z. Metallkd., 2000, vol. 91 (9), pp. 702–16.
11. J.G. Goodwin and H.E. Trout: Trans. ASM, 1966, vol. 59, pp. 384–97.
12. C.N. Tomé, P.J. Maudlin, R.A. Lebensohn, and G.C. Kaschner: Acta Mater., 2001, vol. 49 (15), pp. 3085–96.10.1016/S1359-6454(01)00190-2 ↗
13. G.C. Kaschner, J.F. Bingert, C. Liu, M.L. Lovato, P.J. Maudlin, M.G. Stout, and C.N. Tomé: Acta Mater., 2001, vol. 49 (15), pp. 3097–108.10.1016/S1359-6454(01)00191-4 ↗
14. R.A. Lebensohn, H.R. Wenk, and C.N. Tomé: Acta Mater., 1998, vol. 46 (8), pp. 2683–93.10.1016/S1359-6454(97)00477-1 ↗
15. P.B. Price: in Electron Microscopy and Strength of Crystal, T.G. and J. Washburn, eds., Interscience Publishers, New York, NY, 1963, pp. 41–130.
16. A. Serra, D.J. Bacon, and R.C. Pond: Acta Metall., 1988, vol. 36 (12), pp. 3183–203.10.1016/0001-6160(88)90054-5 ↗
17. R.E. Reed-Hill: Conf. on Deformation Twinning, Gordon and Breach Science Publishers, New York, NY, 1965, pp. 295–320.
18. U.F. Kocks and D.G. Westlake: Trans. AIME, 1967, vol. 239, pp. 1107–09.
19. J.H. Keeler: Trans. AIME, 1958, vol. 212, pp. 781–82.
20. A.U. Seybolt: Trans. AIME, 1965, vol. 233, pp. 248–49.
21. R.L. Straw and N.S. Stoloff: Metall. Trans. A, 1976, vol. 7A, pp. 312–14.10.1007/BF02644476 ↗
22. A.A. Salem, S.R. Kalidindi, and R.D. Doherty: Acta Mater., 2003, vol. 51, pp. 4225–37.10.1016/S1359-6454(03)00239-8 ↗
23. M.H. Yoo and J.K. Lee: Phil. Mag. A, 1991, vol. 63 (5), pp. 987–1000.10.1080/01418619108213931 ↗
24. E.J. Rapperport and C.S. Hartley: Trans. AIME, 1960, vol. 218, pp. 869–77.
25. M.H. Yoo, C.L. Fu, and J.K. Lee: J. Phys. III, 1991, vol. 1 (6), pp. 1065–84.10.1051/jp3:1991172 ↗
26. J.F. Bingert, T.A. Mason, G.C. Kaschner, P.J. Maudlin, and G.T. Gray, III: in Electron Backscatter Diffraction in Materials Science, A.J. Schwartz, M. Kumar, and B.L. Adams, eds., Kluwer Academic/Plenum, New York, NY, 2000, pp. 213–46.10.1007/978-1-4757-3205-4_18 ↗
27. L. Remy: Metall. Trans. A, 1981, vol. 12A, pp. 387–408.10.1007/BF02648536 ↗
28. L. Remy: Acta Metall., 1978, vol. 26, pp. 443–51.10.1016/0001-6160(78)90170-0 ↗
29. A. Rohatgi, K.S. Vecchio, and G.T. Gray, III: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 135–45.10.1007/s11661-001-0109-7 ↗
30. A. Serra, D.J. Bacon, and R.C. Pond: Metall. Mater. Trans. A, 2002, vol. 33, pp. 809–12.10.1007/s11661-002-0149-7 ↗
31. J.F. Bingert, T.A. Mason, G.C. Kaschner, P.J. Maudlin, and G.T. Gray, III: Metall. Mater. Trans. A, 2002, vol. 33, pp. 955–63.10.1007/s11661-002-0165-7 ↗
32. P. Rangaswamy, M.A.M. Bourke, D.W. Brown, G.C. Kaschner, R.B. Rogge, M.G. Stout, and C.N. Tomé: Metall. Mater. Trans. A, 2002, vol. 33, pp. 757–63.10.1007/s11661-002-0142-1 ↗
33. E. Cerreta, G.T. Gray, III, R. Hixson, P.A. Rigg, and D.W. Brown: Acta Mater., 2005, vol. 53, pp. 1751–58.10.1016/j.actamat.2004.12.024 ↗
34. C.N. Tomé, S.R. Agnew, W.R. Blumenthal, M.A.M. Bourke, D.W. Brown, G.C. Kaschner, and P. Rangaswamy: Text. Mater., 2002, vol. 408, pp. 263–68.
35. C.S. Smith and L. Guttman: J. Met., 1953, Parts 1–2, pp. 81–87.10.1007/BF03397456 ↗
36. H.R. Wenk, L. Lutterotti, and S.C. Vogel: Nucl. Inst. Meth. Phys. Res. A, 2003, vol. 515, pp. 575–88.10.1016/j.nima.2003.05.001 ↗
37. L.B. Addessio, E. Cerreta, and G.T. Gray, III: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2893–903.10.1007/s11661-005-0062-y ↗
38. S. Mahajan and G.Y. Chin: Acta Metall., 1973, vol. 21, pp. 1353–63.10.1016/0001-6160(73)90085-0 ↗
39. A. Serra and D.J. Bacon: Acta Metall. Mater., 1995, vol. 43 (12), pp. 4465–81.10.1016/0956-7151(95)00128-I ↗
40. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, Inc., New York, NY, 1986, pp. 181–91.
41. E. Cerreta, C.A. Yablinsky, and G.T. Gray, III: Mater. Sci. Eng. A, 2005, in press.
42. S.G. Song and G.T. Gray, III: Acta Metall. Mater., 1995, vol. 6, pp. 2339–50.10.1016/0956-7151(94)00434-X ↗
43. S.R. Kalidindi, A.A. Salem, and R.D. Doherty: Adv. Eng. Mater., 2003, vol. 5(4), pp. 229–32.10.1002/adem.200300320 ↗