journal article·2010-06

Dynamic Recrystallization in Sintered Cobalt during High-Temperature Deformation

B. Paul, A. Sarkar, J.K. Chakravartty, A. Verma, R. Kapoor, A.C. Bidaye, I.G. Sharma, A.K. Suri

Publisher page

Abstract

The constitutive flow behavior of sintered cobalt in the temperature range 873 to 1473 K (600 to 1200 °C) and at strain rates from 0.001 to 10 s−1 has been studied using constant true strain rate hot compression tests. On the basis of these data, a processing map has been generated that depicts the variation of strain rate sensitivity with temperature and strain rate. The processing map reveals a domain of dynamic recrystallization (DRX) with an optimum condition of processing at 1273 K (1000 °C) and at 10−3 s−1. When deformed within the domain, the stress-strain curves exhibit a single peak followed by flow softening, leading to steady-state behavior. In addition to this, a recently developed approach based on flow curve analysis is used to study the DRX kinetics, which is found to follow an Avrami-type relation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. B. Paul, R. Kapoor, J.K. Chakravartty, A.C. Bidaye, I.G. Sharma, and A.K. Suri: Scripta Mater., 2008, vol. 60, pp. 104–07.10.1016/j.scriptamat.2008.09.012 ↗
2. R. Kapoor, B. Paul, S. Raveendra, I. Samajdar, and J.K. Chakravartty: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 818–27.10.1007/s11661-009-9782-8 ↗
3. Y.V.R.K. Prasad, D.H. Sastry, and S.C. Deevi: Intermetallics, 2000, vol. 8, pp. 1067–74.10.1016/S0966-9795(00)00041-8 ↗
4. M.C. Somani, N.C. Birla, Y.V.R.K. Prasad, and V. Singh: J. Mater. Process. Technol., 1995, vol. 52, pp. 225–37.10.1016/0924-0136(94)01609-5 ↗
5. M.V. Rane, V.H. Bafna, R. Sadanandam, A.K. Sharma, K. Ramadevi, N.K. Menon, M. F. Fonseca, S.K. Tangri, and A.K. Suri: Hydrometallurgy, 2005, vol. 77, pp. 247–51.10.1016/j.hydromet.2004.12.004 ↗
6. R. Sadanandam, M.F. Fonseca, K. Srikant, A.K. Sharma, S.K. Tangri, and A.K. Suri: Hydrometallurgy, 2008, vol. 91, pp. 28–34.10.1016/j.hydromet.2007.11.003 ↗
7. M.J. Hawkins: J. Miner. Met. Mater. Soc., 1998, vol. 50, pp. 44–45.10.1007/s11837-998-0353-z ↗
8. Y.V.R.K. Prasad: J. Mater. Eng. Perform., 2003, vol. 12, pp. 638–45.10.1361/105994903322692420 ↗
9. S.C. Medeiros, W.O. Frazier, and Y.V.R.K. Prasad: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2317–25.10.1007/s11661-000-0147-6 ↗
10. J.K. Chakravartty, Y.V.R.K. Prasad, and M.K. Asundi: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 829–36.10.1007/BF02658992 ↗
11. J.K. Chakravartty, G.K. Dey, S. Banerjee, and Y.V.R.K. Prasad: Mater. Sci. Technol., 1996, vol. 12, pp. 705–16.10.1179/mst.1996.12.9.705 ↗
12. J.K. Chakravartty, R. Kapoor, S. Banerjee, and Y.V.R.K. Prasad: J. Nucl. Mater., 2007, vol. 362, pp. 75–86.10.1016/j.jnucmat.2006.11.007 ↗
13. S. Majumdar, I.G. Sharma, R. Kapoor, J.K. Chakravartty, and A.K. Suri: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 633–39.10.1007/s11663-006-0047-2 ↗
14. B. Paul, D. Jain, A.C. Bidaye, I.G. Sharma, and C.G.S. Pillai: Thermochim. Acta, 2009, vol. 488, pp. 54–59.10.1016/j.tca.2009.01.017 ↗
15. A. Dehghan-Manshadi and P.D. Hodgson: ISIJ Int., 2007, vol. 47, pp. 1799–803.10.2355/isijinternational.47.1799 ↗
16. M.J. Luton and C.M. Sellars: Acta Metall., 1969, vol. 17, pp. 1033–43.10.1016/0001-6160(69)90049-2 ↗
17. J.L. Nazabal, J.J. Urcola, and M. Fuentes: Mater. Sci. Eng., 1987, vol. 86, pp. 93–103.10.1016/0025-5416(87)90444-7 ↗
18. R. Kapoor and J.K. Chakravartty: J. Nucl. Mater., 2002, vol. 306, pp. 126–33.10.1016/S0022-3115(02)01290-4 ↗
19. J.K. Chakravartty, S. Banerjee, Y.V.R.K. Prasad, and M.K. Asundi: J. Nucl. Mater., 1992, vol. 187, pp. 260–71.10.1016/0022-3115(92)90506-G ↗
20. Y.V.R.K. Prasad, K.P. Rao, N. Hort, and K.U. Kainer: Mater. Sci. Eng. A, 2009, vol. 502, pp. 25–31.10.1016/j.msea.2008.10.041 ↗
21. Smithells Metals Reference Book, 6th ed., E.A. Brandes, ed., Butterworth and Company Ltd., UK, 1983.
22. J.C. Zhao and M.R. Notis: Scripta Metall. Mater., 1995, vol. 32, pp. 1671–76.10.1016/0956-716X(95)00253-R ↗
23. A.R. Troiano and J.L. Tokich: Trans. AIME, 1948, vol. 175, pp. 728–34.
24. W. Betteridge: Progr. Mater. Sci., 1979, vol. 24, pp. 51–142.10.1016/0079-6425(79)90004-5 ↗
25. A.F. Guillermet: Int. J. Thermophys., 1987, vol. 8, pp. 481–510.10.1007/BF00567107 ↗
26. E.I. Poliak and J.J. Jonas: Acta Mater., 1996, vol. 44, pp. 127–36.10.1016/1359-6454(95)00146-7 ↗
27. E.I. Poliak and J.J. Jonas: ISIS Int., 2003, vol. 43, pp. 684–91.10.2355/isijinternational.43.684 ↗
28. S.H. Zahiri, C.H.J. Davies, and P.D. Hodgson: Scripta Mater., 2005, vol. 52, pp. 299–304.10.1016/j.scriptamat.2004.10.011 ↗
29. J.J. Jonas, X. Quelennec, L. Jiang, and E. Martin: Acta Mater., 2009, vol. 57, pp. 2748–56.10.1016/j.actamat.2009.02.033 ↗
30. C.M. Sellars: Phil. Trans. R. Soc. London A, 1978, vol. 288, pp. 147–58.10.1098/rsta.1978.0010 ↗
31. A. Dehgan-Manshadi, M.R. Barnet, and P.D. Hodgson: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1359–70.10.1007/s11661-008-9512-7 ↗
32. C.M. Sellars: Czech. J. Phys. B, 1985, vol. 35, pp. 239–48.10.1007/BF01605090 ↗
33. N.D. Ryan and H.J. McQueen: Can. Metall. Q, 1990, vol. 29, pp. 147–62.10.1179/cmq.1990.29.2.147 ↗
34. J.W. Cahn: Acta Metall., 1956, vol. 2, pp. 449–59.10.1016/0001-6160(56)90041-4 ↗
35. G. Kugler and R. Turk: Acta Mater., 2004, vol. 52, pp. 4659–68.10.1016/j.actamat.2004.06.022 ↗
36. S. Andiawarmant, H. Miura, and T. Sakai: J. Jpn. Inst. Met., 2002, vol. 66, pp. 760–66.10.2320/jinstmet1952.66.7_760 ↗
37. M. El. Wahabi, J.M. Cabrera, and J.M. Prado: Mater. Sci. Eng. A, 2003, vol. 343, pp. 116–25.10.1016/S0921-5093(02)00357-X ↗
38. M. El. Wahabi, L. Gavard, F. Montheillet, J.M. Cabrera, and J.M. Prado: Acta Mater., 2005, vol. 53, pp. 4605–12.10.1016/j.actamat.2005.06.020 ↗