journal article·2014-02

Solidification of Sn-0.7Cu-0.15Zn Solder: In Situ Observation

Guang Zeng, Stuart D. McDonald, Christopher M. Gourlay, Kentaro Uesugi, Yasuko Terada, Hideyuki Yasuda, Kazuhiro Nogita

Publisher page

Abstract

High resolution time-resolved X-ray imaging with synchrotron radiation was used for in situ observation of four distinct events during solidification of a Sn-0.7Cu-0.15Zn solder despite small composition and density differences. These included bSn dendrite growth, Sn-CuSn univariant eutectic growth, microporosity formation, and a polyphase reaction in the last stages of freezing. The development of microstructure was described quantitatively by tracking the loci of dendrite tips during grain growth. The results have implications for microstructure control and the understanding of structure-property relationships in Sn-Cu-Zn lead-free solders.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. H.Y. Hsiao, C.M. Liu, H.W. Lin, T.C. Liu, C.L. Lu, Y.S. Huang, C. Chen, and K.N. Tu: Science, 2012, vol. 336, pp. 1007–10.10.1126/science.1216511 ↗
2. T. El-Ashram and R. Shalaby: J. Electron. Mater., 2005, vol. 34, pp. 212–25.10.1007/s11664-005-0234-y ↗
3. M.G. Cho, S.K. Kang, D.Y. Shih, and H.M. Lee: J. Electron. Mater., 2007, vol. 36, pp. 1501–09.10.1007/s11664-007-0254-x ↗
4. D. Swenson: J. Mater. Sci., 2007, vol. 18, pp. 39–54.
5. F. Wang, X. Ma, and Y. Qian: Scripta Mater., 2005, vol. 53, pp. 699–702.10.1016/j.scriptamat.2005.05.013 ↗
6. G. Zeng, S.D. McDonald, Q. Gu, and K. Nogita: J. Mater. Res., 2012, vol. 27, pp. 2609–14.10.1557/jmr.2012.247 ↗
7. Y.C. Huang, S.W. Chen, C.Y. Chou, and W. Gierlotka: J. Alloy Compd., 2009, vol. 477, pp. 283–90.10.1016/j.jallcom.2008.10.156 ↗
8. C.Y. Chou and S.W. Chen: Acta Mater., 2006, vol. 54, pp. 2393–2400.10.1016/j.actamat.2006.01.014 ↗
9. C.Y. Yu and J.G. Duh: Scripta Mater., 2011, vol. 65, pp. 783–86.10.1016/j.scriptamat.2011.07.029 ↗
10. W.Q. Shao, C.Y. Yu, W.C. Lu, J.G. Duh, and S.O. Chen: Mater. Lett., 2013, vol. 93, pp. 300–03.10.1016/j.matlet.2012.11.102 ↗
11. T.R. Bieler, H. Jiang, L.P. Lehman, T. Kirkpatrick, E.J. Cotts, and B. Nandagopal: IEEE Transactions on Components and Packaging Technologies, 2008, vol. 31, pp. 370–81.10.1109/TCAPT.2008.916835 ↗
12. C. Kinney, X. Linares, K.-O. Lee, and J.W. Morris: J. Electron. Mater., 2013, vol. 42, pp. 607–15.10.1007/s11664-012-2306-0 ↗
13. K. Subramanian and J. Lee: J. Mater. Sci., 2004, vol. 15, pp. 235–40.
14. R. Schaefer and M. Glicksman: AIME Met. Soc. Trans., 1967, vol. 239, pp. 257–60.
15. T. Schenk, H. Nguyen Thi, J. Gastaldi, G. Reinhart, V. Cristiglio, N. Mangelinck-Noël, H. Klein, J. Härtwig, B. Grushko, B. Billia, and J. Baruchel: J. Cryst. Growth, 2005, vol. 275, pp. 201–08.10.1016/j.jcrysgro.2004.10.081 ↗
16. H. Yasuda, T. Nagira, M. Yoshiya, N. Nakatsuka, A. Sugiyama, K. Uesugi, and K. Umetani: ISIJ Int., 2011, vol. 51, pp. 402–08.10.2355/isijinternational.51.402 ↗
17. H. Yasuda, I. Ohnaka, K. Kawasaki, A. Sugiyama, T. Ohmichi, J. Iwane, and K. Umetani: J. Cryst. Growth, 2004, vol. 262, pp. 645–52.10.1016/j.jcrysgro.2003.09.052 ↗
18. C.M. Gourlay, K. Nogita, A.K. Dahle, Y. Yamamoto, K. Uesugi, T. Nagira, M. Yoshiya, and H. Yasuda: Acta Mater., 2011, vol. 59, pp. 4043–54.10.1016/j.actamat.2011.03.028 ↗
19. S. Deville, E. Maire, A. Lasalle, A. Bogner, C. Gauthier, J. Leloup, and C. Guizard: J. Am. Ceram. Soc., 2009, vol. 92, pp. 2497–2503.10.1111/j.1551-2916.2009.03264.x ↗
20. H.T. Ma, L. Qu, M.L. Huang, L.Y. Gu, N. Zhao, and L. Wang: J. Alloy Compd., 2012, vol. 537, pp. 286–90.10.1016/j.jallcom.2012.05.055 ↗
21. H. Yasuda, T. Nagira, M. Yoshiya, M. Uesugi, N. Nakatsuka, M. Kiire, A. Sugiyama, K. Uesugi, and K. Umetani: IOP Conf. Ser. Mater. Sci. Eng., 2012, vol. 27, p. 012084.10.1088/1757-899X/27/1/012084 ↗
22. G. Reinhart, N. Mangelinck-Noël, H. Nguyen-Thi, T. Schenk, J. Gastaldi, B. Billia, P. Pino, J. Härtwig, and J. Baruchel: Mater. Sci. Eng. A, 2005, vol. 413–414, pp. 384–88.10.1016/j.msea.2005.08.197 ↗
23. B. Li, H.D. Brody, and A. Kazimirov: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 599–605.10.1007/s11661-006-9058-5 ↗
24. M.L. Huang, Z.J. Zhang, N. Zhao, and Q. Zhou: Scripta Mater., 2013, vol. 68, pp. 853–856.10.1016/j.scriptamat.2013.02.007 ↗
25. A. Bogno, H. Nguyen-Thi, A. Buffet, G. Reinhart, B. Billia, N. Mangelinck-Noël, N. Bergeon, J. Baruchel, and T. Schenk: Acta Mater., 2011, vol. 59, pp. 4356–65.10.1016/j.actamat.2011.03.059 ↗
26. A. Bogno, H. Nguyen Thi, N. Bergeon, N. Mangelinck Noël, T. Schenk, B. Billia, E. Boller, and J. Baruchel: Nucl. Instrum. Methods A, 2010, vol. 268, pp. 394–98.10.1016/j.nimb.2009.09.011 ↗
27. R.H. Mathiesen and L. Arnberg: Acta Mater. 2005, vol. 53, pp. 947–56.10.1016/j.actamat.2004.10.050 ↗
28. R.H. Mathiesen, L. Arnberg, Y. Li, V. Meier, P.L. Schaffer, I. Snigireva, A. Snigirev, and A.K. Dahle: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 170–80.10.1007/s11661-010-0443-8 ↗
29. J. Zhu, T. Wang, F. Cao, W. Huang, H. Fu, and Z. Chen: Mater. Lett., 2012, vol. 89, pp. 137–39.10.1016/j.matlet.2012.08.094 ↗
30. S. Stankus and R. Khairulin: High Temp., 2006, vol. 44, pp. 389–95.10.1007/s10740-006-0048-5 ↗
31. S.D. McDonald, K. Nogita, and A.K. Dahle: Acta Mater., 2004, vol. 52, pp. 4273–30.10.1016/j.actamat.2004.05.043 ↗
32. Y. Terada, H. Yumoto, A. Takeuchi, Y. Suzuki, K. Yamauchi, and T. Uruga: Nucl. Instrum. Methods A, 2010, vol. 616, pp. 270–2.10.1016/j.nima.2009.12.030 ↗
33. T. Ventura, S. Terzi, M. Rappaz, and A.K. Dahle, Acta Mater., 2011, vol. 59, pp. 1651–58.10.1016/j.actamat.2010.11.032 ↗
34. S. O’Hara: Acta Metall., 1967, vol. 15, pp. 231–36.10.1016/0001-6160(67)90196-4 ↗
35. H. Yasuda, Y. Yamamoto, N. Nakatsuka, M. Yoshiya, T. Nagira, A. Sugiyama, I. Ohnaka, K. Uesugi and K. Umetani: in Modeling of Casting, Welding, and Advanced Solidification Processes-XII, Steve L. Cockcroft and Daan M. Maijer, eds., The Minerals, Metals & Materials Society, Vancouver, BC, 2009, pp. 245–52.
36. A. Bogno, H. Nguyen-Thi, G. Reinhart, B. Billia, and J. Baruchel: Acta Mater., 2012, vol. 61, pp. 1303–1315.10.1016/j.actamat.2012.11.008 ↗
37. A. El-Daly and A. El-Taher: Mater. Des., 2013, vol. 47, pp. 607–14.10.1016/j.matdes.2012.12.081 ↗
38. J.A. Dantzig and M. Rappaz: Solidification, 1st ed., EPFL Press, Lausanne, 2009.10.1201/9781439808030 ↗
39. G. Zeng, S.D. McDonald, D. Mu, Y. Zhang, J. Chen, and K. Nogita: Brisbane, Australia, unpublished research, 2013.