journal article·2007-03

Comparison of the Microstructure, Tensile, and Creep Behavior for Ti-24Al-17Nb-0.66Mo (Atomic Percent) and Ti-24Al-17Nb-2.3Mo (Atomic Percent) Alloys

J.P. QUAST, C.J. BOEHLERT

Publisher page

Abstract

The effect of small molybdenum additions, 0.66 and 2.3 at. pct, on the microstructure, tensile, and creep behavior of a nominally Ti-24Al-17Nb (at. pct) alloy was investigated. The alloy containing 2.3 at. pct Mo contained higher body-centered-cubic (bcc) phase volume fractions, which was expected as Mo stabilizes the bcc phase. Constant load, tensile-creep experiments were performed in the stress range of 29 to 275 MPa and the temperature range of 650 °C to 710 °C, in both air and vacuum environments. In-situ creep experiments were performed inside a scanning electron microscope chamber in order to identify the deformation evolution from surface observations. From these experiments, it was evident that α 2 intergranular cracking was prevalent and initiated the fracture process where the crack path followed the α 2 grain boundaries. The Ti-24Al-17Nb-2.3Mo (at. pct) alloy exhibited significantly lower creep rates than the Ti-24Al-17Nb-0.66Mo (at. pct) alloy, and this was associated with less contiguity of the α 2 phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Energetic Materials and Combustion · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. C.J. Cowen, C.J. Boehlert: Phil. Mag., 2006, vol. 86 (1), pp. 99–12410.1080/14786430500156773 ↗
2. H.T. Kestner-Weykamp, C.W. Ward, T.F. Broderick, M.J. Kaufman: Scripta Metall., 1989, vol. 23, pp. 1697–170210.1016/0036-9748(89)90345-1 ↗
3. L.A. Bendersky, W.J. Boettinger, A. Roysburd: Acta Metall. Mater., 1991, vol. 39, pp. 1059–6910.1016/0956-7151(91)90165-W ↗
4. C.G. Rhodes: AF TR No. WL-TR-97-4082, P.R. Smith ed., Air Force Research Laboratory Materials and Manufacturing Directorate, Dayton, OH, 1997, pp. 83–100
5. C.J. Boehlert, B.S. Majumdar, V. Seetharaman, D.B. Miracle: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2305–2310.1007/s11661-999-0240-4 ↗
6. M.G. Mendiratta, H.A. Lipsitt: J. Mater. Sci., 1980, vol. 15, p. 2985–9010.1007/BF00550365 ↗
7. G. Malakondaiah, P.R. Rao: Acta Metall.,1981, vol. 29, p. 1263–7510.1016/0001-6160(81)90017-1 ↗
8. R.S. Mishra, D. Banerjee: Mater. Sci. Eng. A, 1990, vol. 130, pp. 151–6410.1016/0921-5093(90)90056-9 ↗
9. H. Conrad, M. Doner, and B. DeMeester: in Titanium Science and Technology, R.I. Jaffee, and H.M. Burte, eds., Plenum, New York, NY, 1973, pp. 969–1005
10. T.K. Nandy, R.S. Mishra, D. Banerjee: Scripta Metall. Mater., 1993, vol. 28, pp. 569–74.10.1016/0956-716X(93)90198-2 ↗
11. T.K. Nandy, R.S. Mishra, A.K. Gogia, D. Banerjee: Scripta Metall. Mater., 1995, vol. 32, pp. 851–56.10.1016/0956-716X(95)93213-N ↗
12. T.K. Nandy, D. Banerjee: Intermetallics, 2000, vol. 8, pp. 915–2810.1016/S0966-9795(00)00059-5 ↗
13. C.J. Boehlert, D.B. Miracle: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2349–6710.1007/s11661-999-0244-0 ↗
14. P.R. Smith and J.A. Graves: Proc. Orthorhombic Titanium Matrix Composite Workshop, WL-TR-95-4068, Wright-Patterson Air Force Base, OH, 1995, pp. 139–50
15. A.K. Gogia, T.K. Nandy, K. Muralheedharan, D. Banerjee: Mater. Sci. Eng., 1992, vol. A159, pp. 73–86.10.1016/0921-5093(92)90400-U ↗
16. M.J. Blackburn and M.P. Smith: Improved Toughness Alloys Based on Titanium Aluminides, WRDC-TR-89-4095, Wright-Patterson Air Force Base, OH, 1989, pp. 162–72
17. C.J. Boehlert, B.S. Majumdar, S. Krishnamurthy, D.B. Miracle: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 309–2310.1007/s11661-997-0134-2 ↗
18. B.S. Majumdar, C.J. Boehlert, A.K. Rai, and D.B. Miracle: High Temperature Ordered Intermetallic Alloys-VI, Materials Research Society Symposia Proceedings, J. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., Materials Research Society, Pittsburgh, PA, 1995, vol. 364, pp. 1259–65
19. B.S. Majumdar, C.J. Boehlert, and D.B. Miracle: Proc. Orthorhombic Titanium Matrix Composites Workshop, WL-TR-95-4068, Wright-Patterson Air Force Base, OH, 1995, pp. 65–82
20. C.J. Boehlert, B.S. Majumdar, and D.B. Miracle: Fatigue and Fracture of Ordered Intermetallics II, W.O. Soboyejo, T.S. Srivatsan, and R.O. Ritchie, eds., TMS, Warrendale, PA, 1995, pp. 135–53
21. C.J. Boehlert, B.S. Majumdar, and D. Eylon: Key Eng. Mater., 1997, vols. 127–131 Part I, 1997, pp. 843–5010.4028/www.scientific.net/KEM.127-131.843 ↗
22. S.M. Russ, C.J. Boehlert, D. Eylon: Mater. Sci. Eng., 1995, vols. A192–A193, pp. 483–8910.1016/0921-5093(94)03267-X ↗
23. S. Krishnamurthy, P.R. Smith, D.B. Miracle: Scripta Metall., 1994, vol. 31, pp. 653–58.10.1016/0956-716X(94)90205-4 ↗
24. J.R. Porter, J.A. Hall, J.C. Chesnutt, and C.G. Rhodes: Advanced Ti-Based MMC Development, Interim Report, WL-TR-95-4034, Wright-Patterson Air Force Base, OH, 1995
25. S. Krishnamurthy, P.R. Smith, and D.B. Miracle: Metal Matrix Composites, Proc. 10th Int. Conf. of Composite Materials, A. Poursartip, and K.N. Street, eds., Woodhead Publishing, Ltd., Cambridge, United Kingdom, 1995, vol. 2, pp. 739–46
26. S. Krishnamurthy, P.R. Smith, and D.B. Miracle: Proc. Orthorhombic Titanium Matrix Composites Workshop, WL-TR-95-4068, Wright-Patterson Air Force Base, OH, 1995, pp. 83–105
27. J.W. Zhang, C.S. Lee, D.X. Zou, S.Q. Li, J.K.L. Lai: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 559–6410.1007/s11661-998-0137-7 ↗
28. J.F. Edd and J.T. Niemann: in Titanium Matrix Composites, WL-TR-92-4035, P.R. Smith and W.C. Revelos, eds., Wright-Patterson Air Force Base, OH, 1992, pp. 158–73
29. P.R. Smith, A. Rosenberger, M.J. Shepard, R. Wheeler: J. Mater. Sci., 2000, vol. 35, pp. 3169–7910.1023/A:1004833629778 ↗
30. C.G. Rhodes, P.R. Smith, W.H. Hanusiak, M.J. Shephard: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2931–4110.1007/BF02830346 ↗
31. C.F. Yolton, J.P. Beckman: Mater. Sci. Eng., 1995, vols. A192–A193, pp. 597–60310.1016/0921-5093(94)08283-9 ↗
32. C.J. Boehlert, C.J. Cowen, S. Tamirisakandala, D.J. McEldowney, D.B. Miracle: Scripta Mater., 2006, vol. 55, pp. 465–6810.1016/j.scriptamat.2006.05.008 ↗
33. P.R. Smith, W.J. Porter: J. Mater. Sci., 1997, vol. 32, p. 6215–2010.1023/A:1018676808772 ↗
34. S. Krishnamurthy, P.R. Smith, D.B. Miracle: Mater. Sci. Eng., 1998, vol. A243, pp. 285–8910.1016/S0921-5093(97)00815-0 ↗
35. G.A. Hartman, and S.M. Russ: in Metal Matrix Composites: Testing, Analysis and Failure Modes, W.S. Johnson, ed., ASTM, Philadelphia, PA, 1989, pp. 43–5310.1520/STP22848S ↗
36. P.R. Smith, A. Rosenberger, M.J. Shepard: Scripta Metall., 1999, vol. 41 (2), pp. 221–2810.1016/S1359-6462(99)00162-1 ↗
37. C.J. Cowen, C.J. Boehlert: Intermetallics, 2006, vol. 14 (4), pp. 412–2210.1016/j.intermet.2005.08.006 ↗
38. J. Rusing, C. Herzig, Intermetallics, 1996, vol. 4, p. 647–5710.1016/0966-9795(96)00060-X ↗
39. P.R. Smith, W.J. Porter, W.J. Kralik, and J.A. Graves: Metal Matrix Composites, Proc. 10th Int. Conf. of Composite Materials, A. Poursartip, K.N. Street, eds., Woodhead Publishing, Ltd., Cambridge, United Kingdom, 1995, vol. 2, pp. 731–38