journal article·2008-04

Modeling of Texture Evolution during Hot Forging of Alpha/Beta Titanium Alloys

M.G. Glavicic, R.L. Goetz, D.R. Barker, G. Shen, D. Furrer, A. Woodfield, S.L. Semiatin

Publisher page

Abstract

Texture development during the subtransus hot forging of alpha/beta titanium alloys with an equiaxed-alpha microstructure was modeled using the Los Alamos polycrystalline plasticity (LApp) code and a ( {leftlangle {111} ight angle } ) pencil-glide polycrystalline plasticity code coupled with the finite-element-method (FEM) program DEFORM. The methodology treated the partitioning of the imposed strain between the alpha and beta phases, and thus enabled the prediction of the distinct deformation textures developed in the primary alpha and beta matrix during hot working. Two variant selection rules in conjunction with the beta deformation texture were also examined to establish a method for predicting the transformation texture of secondary alpha developed as a result of beta decomposition during cooldown following forging or heat treatment. The approach was validated via an industrial-scale trial comprising hot pancake forging of Ti-6Al-4V.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. G.Z. Sachs: Verein. Deutch Ing., 1928, vol. 72, pp. 734–40
2. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24
3. Report No. LA-CC-88-6, Los Alamos Polycrystal Plasticity Code, Los Alamos National Laboratory, Los Alamos, NM, 1988
4. N.R. Barton: Ph.D. Thesis, Cornell University, Ithaca, NY, 2001
5. E.B. Marin, P.R. Dawson: Comput. Meth. Appl. Mech Eng., 1998, vol. 165, pp. 23–4110.1016/S0045-7825(98)00033-4 ↗
6. V.C. Prantil, J.T. Jenkins, P.R. Dawson, J. Mech. Phys. Solids, 1995, vol. 43, pp. 1283–30210.1016/0022-5096(95)00019-F ↗
7. P. Van Houtte, S. Li, M. Seefeldt, L. Delannay: J. Plast., 2005, vol. 21, pp. 589–62410.1016/j.ijplas.2004.04.011 ↗
8. R.A. Lebensohn, G.R. Canova: Acta Mater., 1997, vol. 45, pp. 3687–9410.1016/S1359-6454(97)00067-0 ↗
9. B. Commentz, C. Hartig, H. Mecking: Comp. Mater. Sci., 1999, vol. 16, pp. 237–4710.1016/S0927-0256(99)00066-X ↗
10. DEFORMTM 2D, version 8.2, Scientific Forming Technologies Corporation, Columbus, OH, 2005
11. F. Pérocheau, J.H. Driver: Int. J. Plast., 2000, vol. 16, pp. 73–8310.1016/S0749-6419(99)00048-0 ↗
12. S.E. Schoenfeld, R.J. Asaro: Int. J. Mech. Sci., 1996, vol. 38, pp. 661–8310.1016/0020-7403(95)00074-7 ↗
13. C.S. Lee, B.J. Duggan: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 2637–4810.1007/BF02851357 ↗
14. S.L. Semiatin, F. Montheillet, G. Shen, J.J. Jonas: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2719–2710.1007/s11661-002-0394-9 ↗
15. R. Hill: J. Mech. Phys. Solids, 1965, vol. 13, pp. 213–2210.1016/0022-5096(65)90010-4 ↗
16. P.M. Suquet: J. Mech. Phys. Solids, 1993, vol. 41, pp. 981–100210.1016/0022-5096(93)90051-G ↗
17. R. Hill: J. Mech. Phys. Solids, 1967, vol. 15, pp. 79–9510.1016/0022-5096(67)90018-X ↗
18. S.L. Semiatin, S.L. Knisley, P.N. Fagin, F. Zhang, D.R. Barker: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2377–8610.1007/s11661-003-0300-0 ↗
19. M.G. Glavicic, P.A. Kobryn, T.R. Bieler, S.L. Semiatin: Mater. Sci. Eng., 2003, vol. A346, pp. 50–5910.1016/S0921-5093(02)00535-X ↗
20. Z.S. Zhu, J.L. Gu, N.P. Chen: Scripta Mater., 1996, vol. 34, pp. 1281–8610.1016/1359-6462(95)00659-1 ↗
21. Z.S. Zhu, J.L. Gu, R.Y. Liu, N.P. Chen, M.G. Yan: Mater. Sci. Eng., 2000, vol. A280, pp. 199–20310.1016/S0921-5093(99)00666-8 ↗
22. N. Gey, M. Humbert: Acta Mater., 2002, vol. 50, pp. 277–8710.1016/S1359-6454(01)00351-2 ↗
23. N. Gey, M. Humbert, M.J. Philippe, Y. Combres: Mater. Sci. Eng., 1996, vol. A219, pp. 80–8810.1016/S0921-5093(96)10388-9 ↗
24. N. Gey, M. Humbert, M.J. Philippe, Y. Combres: Mater. Sci. Eng., 1997, vol. A230, pp. 68–7410.1016/S0921-5093(97)80111-6 ↗
25. H. Moustahfid, M. Humbert, M.J. Philippe: Acta Mater., 1997, vol. 45, pp. 3785–9010.1016/S1359-6454(97)00038-4 ↗
26. P.R. Morris, S.L. Semiatin: Text. Cryst. Solids, 1979, vol. 3, pp. 113–1910.1155/TSM.3.113 ↗
27. H.R. Piehler, W.A. Backofen: Metall. Trans., 1971, vol. 2, pp. 249–5510.1007/BF02662665 ↗
28. J.D. Miller, S.L. Semiatin: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 259–6210.1007/s11661-005-0158-4 ↗
29. L. Gemain, N. Gey, M. Humbert, A. Hazotte, P. Bocher, M. Jahazi: Mater. Characterization, 2005, vol. 54, pp. 216–2210.1016/j.matchar.2004.11.011 ↗
30. PANDAT, Computherm LLC, Madison, WI, 2006
31. M.G. Glavicic, S.L. Semiatin: Acta Mater., 2006, vol. 54, pp. 5337–4710.1016/j.actamat.2006.04.020 ↗
32. L. Zeng, T.R. Bieler: Mater. Sci. Eng., 2005, vol. A392, pp. 403–1410.1016/j.msea.2004.09.072 ↗
33. T.W. Duerig, J. Albrecht, D. Richter, P. Fisher: Acta Metall., 1982, vol. 30, pp. 2161–7210.1016/0001-6160(82)90137-7 ↗
34. D. Pionnier, M. Humbert, M.J. Philippe, Y. Combres: Acta Mater., 1998, vol. 46, pp. 5891–9810.1016/S1359-6454(98)00216-X ↗