journal article·2003-03Open access

A study of microsegregation in Al-Cu using a novel single-pan scanning calorimeter

H. B. Dong, M. R. M. Shin, E. C. Kurum, J. D. Hunt, H. Cama

Abstract

A single-pan scanning calorimeter has been developed that eliminates the smearing of latent heat that occurs in a conventional two-pan heat-flux differential scanning calorimeter (DSC). In the new calorimeter, accurate enthalpy/temperature data was obtained in pure Al without smearing, and excellent sensitivity to new phases was obtained in a multicomponent Al alloy (LM25). The calorimeter has been used to investigate microsegregation in an Al-4.45 wt pct Cu alloy. The enthalpy/temperature data fell between that calculated, assuming no mixing in the solid (Scheil) and complete mixing in the solid (equilibrium solidification). The amount of segregation agreed well with that calculated using a diffusion-based model of microsegregation. The difficulty of getting the fraction solid from the enthalpy data is discussed, and it is concluded that it is not possible to do so without using a microsegregation model. In addition, it is concluded that it is wrong to assume that the enthalpy of an alloy can be given by a specific heat term and a constant latent heat term that depend on fraction liquid as is assumed in most casting models.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Crystallization and Solubility Studies · nanoparticles nucleation surface interactions · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. G. Höhne, W. Hemminger, and H.J. Flammersheim: Differential Scanning Calorimetry, Springer, Berlin, 1996, pp. 22–38.10.1007/978-3-662-03302-9 ↗
2. B. Wunderlich: Thermal Analysis, Academic Press, New York, NY, 1990, pp. 133–40.
3. N.F. Tsang: Handbook of Differential Thermal Analysis, Chemical Publishing Company, New York, NY, 1966, pp. 91–123.
4. R.F. Speyer: Thermal Analysis of Materials, Marcel Dekker, Inc., New York, NY, 1994.
5. K. O’Reilly and B. Cantor: Proc. R. Soc. London A, 1996, vol. 452, pp. 2141–60.10.1098/rspa.1996.0113 ↗
6. H.B. Dong and J.D. Hunt: High Temperature-High Pressure, 2000, vol. 32, pp. 311–19.10.1068/htwu260 ↗
7. H.B. Dong and J.D. Hunt: J. Thermal Anal. Cal., 2001, vol. 64, pp. 167–76.10.1023/A:1011589013639 ↗
8. M.J. Richardson: Compendium of Thermophysical Property Measurement Methods, Plenum Press, New York, NY, 1992, pp. 519–45.10.1007/978-1-4615-3286-6_18 ↗
9. M.R.M. Shin and J.D. Hunt: Proc. Euromat 2001, Rimini, Italy, doc. 581.
10. R.H. Davies, A.T. Dinsdale, T.G. Chart, T.I. Barry, and M.H. Rand: High Temp. Sci., 1990, vol. 26, pp. 251–62.
11. D.K. Banerjee, W.J. Boettinger, R.J. Schaefer, and M.E. Williams: Modelling of Casting, Welding and Advanced Solidification Processes VII, TMS, Warrendale, PA, 1995, p. 491.
12. H.B. Dong and J.D. Hunt: J. Thermal Anal. Cal., 2001, vol. 64, pp. 341–50.10.1023/A:1011578205887 ↗
13. C.S. Smith: Trans. Am. Inst. Met. Eng., 1940, vol. 137, pp. 236–45.
14. R. Hultgren, P.D. Desai, and D.T. Hawkins: Selected Values of the Thermodynamic Properties of Elements, ASM, Metals Park, OH, 1973, pp. 149–59.
15. P.N. Quested, K.C. Mills, R.F. Brookes, A.P. Day, R. Taylor, and H. Szelagowski: Proc. Int. Conf. on solidification processing, Department of Engineering Materials, University of Sheffield, United Kingdom, 1997, pp. 143–50.
16. H.B. Dong: Ph.D. Thesis, University of Oxford, Oxford, United Kingdom, 2000, pp. 191–220.
17. L. Bäckerud, E. Król, and J. Tammunen: Solidification Characteristics of Aluminium Alloys, Skanaluminium, Oslo, Norway, 1986, vol. 1, pp. 63–73.
18. E. Scheil: Z. Metallkd., 1942, vol. 34, p. 70.
19. J.D. Hunt and R.W. Thomas: Proc. Int. Conf. on Solidification Processing, Department of Engineering Materials, University of Sheffield, United Kingdom, 1997, pp. 143–50.