Hydrogen-involved tensile and cyclic deformation behavior of low-alloy pressure vessel steel
Source abstract
Abstract
The temperature- and strain-rate-dependent tensile behavior of hydrogen-charged low-alloy pressure vessel steel ASTM A508 C1.3 has been investigated. The fatigue crack initiation and propagation behavior of the steel in high-temperature water environments has also been evaluated. It was found that hydrogen played significant roles in both tensile and cyclic deformation processes, especially in the temperature and strain-rate region of dynamic strain aging (DSA). The presence of hydrogen resulted in a distinct softening in tensile strength and a certain loss in tensile ductility in the DSA region. Remarkable degradation in fatigue crack initiation and propagation resistance in high-temperature water environments was observed in the DSA strain-rate region. Typical hydrogen-induced cracking features also appeared on the corresponding fatigue fracture surfaces. The interactions between hydrogen and DSA in tensile and cyclic deformation processes are discussed as well as their combined effects on the environmentally assisted cracking (EAC) mechanism of pressure vessel steels in high-temperature water environments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. G.R. Sunaryo, Y. Katsumura, and K. Ishigure: Radiat. Phys. Chem., 1995, vol. 45, pp. 703–14.10.1016/0969-806X(94)00084-W ↗
2. R.G. Sowden: J. Nucl. Mater., 1963, vol. 8, pp. 81–101.10.1016/0022-3115(63)90011-4 ↗
3. D.R. Harries and G.H. Broomfield: J. Nucl. Mater., 1963, vol. 9, pp. 327–38.10.1016/0022-3115(63)90149-1 ↗
4. G.H. Broomfield: J. Nucl. Mater., 1965, vol. 16, pp. 249–59.10.1016/0022-3115(65)90114-5 ↗
5. J.K. Chakravartty, G.E. Prasad, T.K. Sinha, and M.K. Asundi: J. Nucl. Mater., 1986, vol. 138, pp. 107–16.10.1016/0022-3115(86)90261-8 ↗
6. H. Hänninen, W. Cullen, and M. Kemppainen: Corrosion, 1990, vol. 46, pp. 563–73.10.5006/1.3585150 ↗
7. T.K. Yeh and F. Chu: Nucl. Sci. Eng., 2001, vol. 139, pp. 221–33.10.13182/NSE00-77 ↗
8. D.D. Macdonald: Corrosion, 1992, vol. 48, pp. 194–205.10.5006/1.3315925 ↗
9. K. Ishigure, J. Takagi, and H. Shiraishi: Radiat. Phys. Chem., 1987, vol. 29, pp. 195–99.
10. E. Ibe, M. Nagase, M. Sakagami, and S. Uchida: J. Nucl. Sci. Technol., 1987, vol. 24, pp. 220–26.10.1080/18811248.1987.9735796 ↗
11. E. Ibe, M. Sakagami, and S. Uchida: J. Nucl. Sci. Technol., 1986, vol. 23, pp. 11–28.10.3327/jnst.23.11 ↗
12. G.R. Caskey, A.H. Dexter, M.L. Holzworth, M.R. Louthan, and R.G. Derrick: Corrosion, 1976, vol. 32, pp. 370–74.10.5006/0010-9312-32.9.370 ↗
13. N. Nagata, S. Sato, and Y. Katada: Iron Steel Inst. Jpn. Int., 1991, vol. 31, pp. 106–14.10.2355/isijinternational.31.106 ↗
14. I.G. Park and A.W. Thompson: Metall. Trans. A, 1990, vol. 21A, pp. 465–77.10.1007/BF02782427 ↗
15. I.S. Kim and S.S. Kang: Int. J. Press. Ves. Piping, 1995, vol. 62, pp. 123–29.10.1016/0308-0161(95)93969-C ↗
16. H.J. Maier, W. Popp, and H. Kaesche: Mater. Sci. Eng., 1995, vol. A191, pp. 17–26.10.1016/0921-5093(94)09623-5 ↗
17. L. Fournier, D. Delafosse, and T. Magnin: Mater. Sci. Eng., 1999, vol. A269, pp. 111–19.10.1016/S0921-5093(99)00167-7 ↗
18. M. Beghini, G. Benamati, L. Bertini, I. Ricapito, and R. Valentini: J. Nucl. Mater., 2001, vol. 288, pp. 1–6.10.1016/S0022-3115(00)00716-9 ↗
19. T.D. Le and I.M. Bernstein: Acta Metall. Mater., 1991, vol. 39, pp. 363–72.10.1016/0956-7151(91)90315-R ↗
20. O.K. Chopra and W.J. Shack: J. Press. Ves. Technol., 1999, vol. 121, pp. 49–60.10.1115/1.2883667 ↗
21. D.J. Gavenda, P.R. Luebbers, and O.K. Chopra: Fatigue Fract. J., 1997, vol. 350, pp. 243–55.
22. H. Hänninen, K. Torronen, M. Kemppainen, and S. Salonen: Corr. Sci., 1983, vol. 23, pp. 663–79.10.1016/0010-938X(83)90126-9 ↗
23. J. Kuniya, H. Anzai, and I. Masaoka: Corrosion, 1992, vol. 48, pp. 419–25.10.5006/1.3315955 ↗
24. F.P. Ford, D.F. Taylor, P.L. Andresen, and R.G. Ballinger: EPRI NP-5064M, Project 2006-6, Final Report, Electric Power Research Institute, Palo Alto, CA, 1987.
25. G. Gabetta: Fatigue Fract. Eng. Mater. Struct., 1987, vol. 10, pp. 373–83.10.1111/j.1460-2695.1987.tb00487.x ↗
26. K. Torronen and M. Kemppainen: ASTM STP 801, ASTM, Philadelphia, PA, 1983, pp. 287–318.
27. K.A. Esaklul and W.W. Gerberich: Scripta Metall., 1983, vol. 17, pp. 1079–82.10.1016/0036-9748(83)90457-X ↗
28. K. Jatavallabhula and W.W. Gerberich: Fatigue Fract. Eng. Mater. Struct., 1981, vol. 4, pp. 173–78.10.1111/j.1460-2695.1981.tb01118.x ↗
29. R.A. Oriani and P.H. Josephic: Metall. Trans. A, 1980, vol. 11A, pp. 1809–20.10.1007/BF02655096 ↗
30. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp. 861–90.10.1007/BF02654700 ↗
31. R. Garber, I.M. Bernstein, and A.W. Thompson: Metall. Trans. A, 1981, vol. 12A, pp. 225–34.10.1007/BF02655195 ↗
32. J.K. Lin and R.A. Oriani: Acta Metall., 1983, vol. 31, pp. 1071–77.10.1016/0001-6160(83)90203-1 ↗
33. H.J. Maier and H. Kaesche: Mater. Sci. Eng., 1989, vol. A117, pp. L11-L15.10.1016/0921-5093(89)90112-3 ↗
34. H.E. Hanninen, T.C. Lee, I.M. Robertson, and H.K. Birnbaum: J. Mater. Eng. Performance, 1993, vol. 2, pp. 807–17.10.1007/BF02645681 ↗
35. Y. Jagodzinski, H. Hänninen, O. Tarasenko, and S. Smuk: Scripta Mater., 2000, vol. 43, pp. 245–51.10.1016/S1359-6462(00)00398-5 ↗
36. G.P. Tiwari, A. Bose, J.K. Chakravartty, S.L. Wadekar, M.K. Totlani, R.N. Arya, and R.K. Fotedar: Mater. Sci. Eng., 2000, vol. A286, pp. 269–81.10.1016/S0921-5093(00)00793-0 ↗
37. V.I. Shvachko: Int. J. Hydrogen Energy, 2000, vol. 25, pp. 473–80.10.1016/S0360-3199(99)00058-0 ↗
38. O.N. Senkov and J.J. Jonas: Metall. Mater. Trans. A, 1996, vol. 27A, 1877–87.10.1007/BF02651937 ↗
39. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng., 1994, vol. A176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
40. P.J. Ferreira, I.M. Robertson, and H.K. Birnbaum: Acta Metall., 1998, vol. 46, pp. 1749–57.
41. I.M. Robertson: Eng. Fract. Mech., 1999, vol. 64, pp. 649–73.10.1016/S0013-7944(99)00094-6 ↗
42. P. Sofronis and I.M. Robertson: Phil. Mag., 2002, vol. A82, pp. 3405–13.10.1080/01418610208240451 ↗
43. B.H. Lee and I.S. Kim: J. Nucl. Mater., 1995, vol. 226, pp. 216–25.10.1016/0022-3115(95)00092-5 ↗
44. Y. Katada and N. Nagata: Corr. Sci., 1985, vol. 25, pp. 693–704.10.1016/0010-938X(85)90006-X ↗
45. F.P. Ford: J. Press. Ves. Technol., 1988, vol. 110, pp. 113–28.10.1115/1.3265576 ↗
46. Y. Katada, N. Nagata, and S. Sato: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 877–83.10.2355/isijinternational.33.877 ↗
47. O.K. Chopra and W.J. Shack: Nucl. Eng. Design, 1998, vol. 184, pp. 49–76.10.1016/S0029-5493(97)00368-3 ↗
48. Y. Katada and K. Kurosawa: ASME PVP, 1999, vol. 386, pp. 249–54.
49. S.G. Lee and I.S. Kim: J. Nucl. Sci. Technol., 2001, vol. 38, pp. 120–26.10.3327/jnst.38.120 ↗
50. X.Y. Zhou, J. Congleton, and A. Bahraloloom: Corrosion, 1998, vol. 54, pp. 898–909.10.5006/1.3284809 ↗
51. T.D. Le and B.E. Wilde: Corrosion, 1983, vol. 39 (7), pp. 258–65.10.5006/1.3581910 ↗
52. J.D. Atkinson and J. Yu: Fatigue Fract. Eng. Mater. Struct., 1997, vol. 20, pp. 1–12.10.1111/j.1460-2695.1997.tb00396.x ↗
53. A. Saxena: Nonlinear Fracture Mechanics for Engineers, CRC press, New York, NY, 1998, p. 303.
54. S. Suresh, G.F. Zamiski, and R.O. Ritchie: Metall. Trans. A, 1981, vol. 12A, pp. 1435–43.10.1007/BF02643688 ↗