Morphological stability of copper-silver multilayer thin films at elevated temperatures
Source abstract
Abstract
The kinetics of breakdown of Cu-Ag polycrystalline multilayers during aging at elevated temperatures was investigated. Microlaminates with Cu:Ag layer thicknesses of 2:2, 1:4, 4:1, and 4:0.1 µm were aged for 10 minutes to 192 hours (t), at temperatures ranging from 700 to 900 K. The asdeposited microlaminates had a fine-grained columnar microstructure with well-defined interfaces. Upon annealing, the morphology evolved over three time regimes. In the first regime, the grains in each phase grew quickly to an apparent terminal size, which depended on both the layer thickness and annealing temperature. Next, grooves formed at the intersections of grain boundaries and layer interfaces and grew with a t0.25 dependence. The groove growth appeared to be independent of layer thickness and was approximately equal in Cu and Ag. The microlaminates started to break down in the third regime, as grain-boundary grooves on opposite sides of a layer bridged its thickness. Models for grain growth and grooving in thin films were modified for multilayer microlaminates and were shown to fit the experimental data reasonably well. This suggests that the terminal grain size is reached when groove drag overcomes the capillary forces driving grain growth, and that grooving kinetics are dominated by interfacial diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: nanoparticles nucleation surface interactions · Copper Interconnects and Reliability · Fluid Dynamics and Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. H.-J. Stock, U. Kleineberg, B. Heidemann, K. Hilgers, A. Kloidt, B. Schmiedeskamp, U. Heinzmann, M. Krumrey, P. Müller, and F. Scholze: Appl. Phys. A, 1994, vol. 58, pp. 371–76.10.1007/BF00323612 ↗
2. D.G. Stearns, R.S. Rosen, and S.P. Vernon: J. Vac. Sci. Technol. A, 1991, vol. 9, pp. 2662–69.10.1116/1.577221 ↗
3. A. Ponchet, A. Rocher, J.-Y. Emery, C. Starck, and L. Goldstein: J. Appl. Phys., 1993, vol. 74, pp. 3778–82.10.1063/1.354469 ↗
4. T.D. Nguyen and J.H. Underwood: Mater. Res. Soc. Symp. Proc., 1995, vol. 382, pp. 297–302.10.1557/PROC-382-297 ↗
5. A.N. Panckow, T.P. Drüsedau, F. Klabunde, and B. Schröder: Mater. Res. Soc. Symp. Proc., 1995, vol. 382, pp. 271–76.10.1557/PROC-382-271 ↗
6. C.M. Falco and I.K. Schuller: Synthetic Modulated Structures, Academic Press, Inc., Orlando, FL, 1985, pp. 339–64.10.1016/B978-0-12-170470-4.50013-0 ↗
7. S.R. Choi, J.W. Hutchinson, and A.G. Evans: Mech. Mater., 1999, vol. 31, pp. 431–47.10.1016/S0167-6636(99)00016-2 ↗
8. H. Lämmermann and G. Kienel: Adv. Mater. Proc., 1991, vol. 140, pp. 18–23.
9. J. Heathcote, G.R. Odette, G.E. Lucas, and R.G. Rowe: Mater. Res. Soc. Symp. Proc., 1996, vol. 434, pp. 101–12.10.1557/PROC-434-101 ↗
10. K. Barmak, K.R. Coffey, D.A. Rudman, and S. Foner: J. Appl. Phys., 1990, vol. 67, pp. 7313–22.10.1063/1.344517 ↗
11. E. Spiller: Physics, Fabrication and Applications of Multilayered Structures, Plenum Press, New York, NY, 1988, pp. 271–310.10.1007/978-1-4757-0091-6_13 ↗
12. S.T. Chou, K.Y. Cheng, L.T. Chou, and K.C. Hsieh: J. Appl. Phys., 1995, vol. 78, pp. 6270–75.10.1063/1.360507 ↗
13. A.G. Cullis, D.J. Robbins, A.J. Pidduck, and P.W. Smith: J. Cryst. Growth, 1992, vol. 123, pp. 333–43.10.1016/0022-0248(92)90593-8 ↗
14. R.G. Rowe, D.W. Skelly, M. Larsen, J. Heathcote, G. Lucas, and G.R. Odette: Mater. Res. Soc. Symp. Proc., 1994, vol. 322, pp. 461–72.10.1557/PROC-322-461 ↗
15. D. Josell and F. Spaepen: Acta Metall. Mater., 1993, vol. 41, pp. 3017–27.10.1016/0956-7151(93)90116-A ↗
16. J.C. Malzahn Kampe, T.H. Courtney, and Y. Leng: Acta Metall., 1989, vol. 37, pp. 1735–45.10.1016/0001-6160(89)90059-X ↗
17. E. Werner: Acta Metall., 1989, vol. 37, pp. 2047–53.10.1016/0001-6160(89)90090-4 ↗
18. D. Dutartre, P. Warren, F. Provenier, F. Chollet, and A. Pério: J. Vac. Sci. Technol., 1994, vol. A12, pp. 1009–14.10.1116/1.579276 ↗
19. A. Ponchet, A. Rocher, J.-Y. Emery, C. Starck, and L. Goldstein: Mater. Sci. Eng., 1993, vol. B21, pp. 241–43.10.1016/0921-5107(93)90357-S ↗
20. D.J. Kirill, S.H. Davis, M.J. Miksis, and P.W. Voorhees: Proc. R. Soc. London A, 1999, vol. 455, pp. 3825–44.10.1098/rspa.1999.0479 ↗
21. M. Bobeth, W. Pompe, M. Rockstroh, and E. Schumann: Acta Metall. Mater., 1994, vol. 42, pp. 579–88.10.1016/0956-7151(94)90512-6 ↗
22. A. Karma and A. Sarkissian: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 635–56.10.1007/BF02648952 ↗
23. M. Bobeth, W. Pompe, E. Schumann, and M. Rühle: Acta Metall. Mater., 1992, vol. 40, pp. 2669–76.10.1016/0956-7151(92)90336-D ↗
24. F.N. Rhines: Trans. AIME, 1940, vol. 137, p. 246.
25. D.J. Srolovitz and S.A. Safran: Mater. Res. Soc. Symp. Proc., 1985, vol. 47, pp. 53–60.10.1557/PROC-47-53 ↗
26. K.T. Miller, F.F. Lange, and D.B. Marshall: J. Mater. Res., 1990, vol. 5, pp. 151–60.10.1557/JMR.1990.0151 ↗
27. D. Josell and F. Spaepen: MRS Bull., 1999, vol. 24, pp. 39–43.10.1557/S0883769400051538 ↗
28. D. Josell and W.C. Carter: Creep and Stress Relaxation in Miniature Components, TMS, Warrendale, PA, 1997, pp. 271–81.
29. B.A. Movchan and A.V. Demchishin: Fiz. Metall. Metalloved., 1969, vol. 28, pp. 653–60.
30. C.R.M. Grovenor, H.T.G. Hentzell, and D.A. Smith: Acta Metall., 1984, vol. 32, pp. 773–81.10.1016/0001-6160(84)90150-0 ↗
31. 1996 Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1996, pp. 236–37.
32. H.L. Knoedler: Ph.D. Thesis, University of California Santa Barbara, Santa Barbara, CA, 2000, pp. 98–149.
33. J.E. Burke: Trans. Am. Inst. Min. Eng., 1949, vol. 180, p. 73.
34. W.W. Mullins: J. Appl. Phys., 1957, vol. 28, pp. 333–39.10.1063/1.1722742 ↗
35. R.E. Reed-Hill: Physical Metallurgy Principles, 3rd ed., PWS-Kent Publishing Company, Boston, MA, 1992, pp. 304–10.
36. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Chapman and Hall, London, 1993, pp. 130–39.
37. P. Feltham: Acta Metall., 1957, vol. 5, pp. 97–105.10.1016/0001-6160(57)90136-0 ↗
38. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–38.10.1016/0001-6160(65)90200-2 ↗
39. M.Z. Butt and P. Feltham: Fizika, 1982, vol. 14, pp. 149–53.
40. C.J. Simpson, K.T. Aust, and W.C. Winegard: Metall. Trans., 1971, vol. 2, pp. 993–97.10.1007/BF02664230 ↗
41. E.L. Holmes and W.C. Winegard: Acta Metall., 1959, vol. 7, pp. 411–14.10.1016/0001-6160(59)90051-3 ↗
42. G.T. Higgins: Met. Sci. J., 1974, vol. 8, pp. 143–50.10.1179/msc.1974.8.1.143 ↗
43. R.A. Vandermeer and H. Hu: Acta Metall. Mater., 1994, vol. 42, pp. 3071–75.10.1016/0956-7151(94)90404-9 ↗
44. R.E. Mistler and R.L. Coble: Amer. Ceram. Soc. J., 1968, vol. 51, p. 472.10.1111/j.1151-2916.1968.tb11927.x ↗
45. W.W. Mullins: J. Appl. Phys., 1986, vol. 59, pp. 1341–49.10.1063/1.336528 ↗
46. I.M. Ghauri, M.Z. Butt, and S.M. Raza: J. Mater. Sci., 1990, vol. 25, pp. 4782–84.10.1007/BF01129942 ↗
47. H.J. Frost and M.F. Ashby: in Deformation-Mechanism Maps—The Plasticity and Creep of Metals and Ceramics, Pergamon Press, New York, NY, 1982, p. 21.
48. P.A. Beck, J.C. Kremer, L.J. Demer, and M.L. Holzworth: Trans. AIME, 1948, vol. 175, pp. 372–400.
49. J.E. Palmer, C.V. Thompson, and H.I. Smith: J. Appl. Phys., 1987, vol. 62, pp. 2492–97.10.1063/1.339460 ↗
50. W.W. Mullins: Acta Metall., 1958, vol. 6, pp. 414–27.10.1016/0001-6160(58)90020-8 ↗
51. A. Gangulee: J. Appl. Phys., 1974, vol. 45, pp. 3749–56.10.1063/1.1663855 ↗
52. E.R. Funk, H. Udin, and J. Wulff: Trans. AIME, 1951, vol. 191, pp. 1206–08.
53. H.U. Åström: Arkiv Fysik, 1958, vol. 13, pp. 69–80.
54. L.E. Murr: Scripta Metall., 1972, vol. 6, pp. 203–08.10.1016/0036-9748(72)90168-8 ↗
55. M.C. Inman and H.R. Tipler: Metall. Rev., 1963, vol. 8, pp. 105–66.
56. L.E. Murr: Interfacial Phenomena in Metals and Alloys, Addison-Wesley Publishing Company, Reading, MA, 1975.
57. C.S. Smith: Imperfections in Nearly Perfect Crystals, John Wiley & Sons, New York, NY, 1952, p. 377.
58. D. Turnbull: Impurities and Imperfections, ASM, Cleveland, OH, 1955, pp. 121–44.
59. D. Josell, W.C. Carter, and J.E. Bonevich: Nanostr. Mater., 1999, vol. 12, pp. 387–90.10.1016/S0965-9773(99)00141-5 ↗
60. D. Josell: National Institute of Standards and Technology, Gaithersburg, MD, private communication, 2002.
61. D. Josell, S.R. Coriell, and G.B. McFadden: Acta Metall. Mater., 1995, vol. 43, pp. 1987–99.10.1016/0956-7151(94)00367-Q ↗
62. W.W. Mullins and P.G. Shewmon: Acta Metall., 1959, vol. 7, pp. 163–70.10.1016/0001-6160(59)90069-0 ↗
63. J. Sommer, T. Muschik, Chr. Herzig, and W. Gust: Acta Mater., 1996, vol. 44, pp. 327–34.10.1016/1359-6454(95)00166-2 ↗