Modeling of kinetics of austenite-to-allotriomorphic ferrite transformation in 0.37C-1.45Mn-0.11V microalloyed steel
Source abstract
Abstract
The present article is concerened with the theoretical and experimental study of the growth kinetics of allotriomorphic ferrite in medium carbon vanadium-titanium microalloyed steel. A theoretical model is presented in this work to calculate the evolution of austente-to-allotriomorphic ferrite transformation with time at a very wide temperature range. At temperatures above eutectoid temperature, where allotriomorphic ferrite is the only austenite transormation product, thesoft-impingement effect should be taken into account in the modeling. In that case, the Gilmouret al., analysis reliably predicts the progress of austenite-to-allotriomorphic ferrite transformation in this steel. By contrast, since pearlite acts as a carbon sink, the carbon enrichment of austenite due to the previous ferrite formation is avoided, and carbon concentration in austenite far from the α/λ interface remains the same as the overal carbon content of the steel. Hence, the soft-impingement effect should be neglected, and allotriomorphic ferrite is considered to grow under a parabolic law. Therefore, assumption of a semi-infinite extent austenite with constant boundary conditions is suitable for the kinetics of the isothermal decomposition of austenite. An excellent agreement (higher than 93 pct inR 2) has been obtained between the experimental and predicted values of the volume fraction of ferrite in all of the ranges of temperature studied.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. H.I. Aaronson:Symp. on the Mechanism of Phase Transformations in Metals, Institute of Metals, London, 1955, p. 47.
2. C.A. Dube, H.I. Aaronson, and R.F. Mehl:Rev. Metall.. 1958, vol. 3, pp. 201–10.10.1051/metal/195855030201 ↗
3. J.W. Christian:Theory of Phase Transformation and Alloys, 2nd ed., Pergamon Press, Oxford, United Kingdom, 1975, Part 1, p. 10.
4. H.K.D.H. Bhadeshia: inMathematical Modelling of Weld Phenomena III, H. Cerjak and H.K.D.H. Bhadeshia, eds., Institute of Materials, London, 1996, pp. 1–50.
5. H.K.D.H. Bhadeshia, L.-E. Svensson, and B. Gretoft:Proc. Conf. on Welding Metallurgy of Structural Steels, J.Y. Koo, ed., TMS-AIME, Warrendale, PA, 1987, pp. 517–30.
6. G.P. Krielaart, M. Onik, C. M. Brakman, F. D. Tichelaar, E. J. Mittemeijer, and S. van der Zwaag:Z. Metallkd., 1994, vol. 84, pp. 756–65.
7. M. Unemoto, A. Hiramatsu, A. Moriya, T. Watanabe, S. Nanaba, N. Nakajima, G. Anan, and Y. Higo:Iron Steel Inst. Jpn. Int.. 1992, vol. 32, pp. 306–15.10.2355/isijinternational.32.306 ↗
8. J.W. Cahn:Acta Metall., 1956, vol. 4, pp. 449–59.10.1016/0001-6160(56)90041-4 ↗
9. M. Hillert, and L.I. Staffanson:Acta Chem. Scand.. 1970, vol. 24, pp. 3618–26.10.3891/acta.chem.scand.24-3618 ↗
10. K.L. Lee, J.K. Lee, K.B. Kang, and O. Kwon:Iron Steel Inst. Jpn. Int. 1992, vol. 32, pp. 326–34.10.2355/isijinternational.32.326 ↗
11. I. Madariaga, I. Gutierrez, C. Garcia de Andres, and C. Capdevila:Scripta Metall. Mater.. 1999, vol. 41, pp. 229–35.10.1016/S1359-6462(99)00149-9 ↗
12. I. Madariaga, and I. Gutierrez:Acta Mater. 1999, vol. 47, pp. 951–60.10.1016/S1359-6454(98)00388-7 ↗
13. I. Madariaga, I. Gutiérrez, and J.L. Romero:Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1003–15.10.1007/s11661-998-1009-x ↗
14. M.A. Linaza, J.L. Romero, J.M. Rodriguez-Ibabe, and J.J. Urcola:Scripta Metall. 1993, vol. 29, p. 1217.10.1016/0956-716X(93)90112-6 ↗
15. I. Madariaga, and I. Gutiérrez:Scripta Metall. Mater. 1997, vol. 37, pp. 1185–92.10.1016/S1359-6462(97)00229-7 ↗
16. C. García De Andrés, C. Capdevila, and F.G. Caballero:Proc. Congreso Nacional de Tratamientos Térmicosy de Superficie TRATERMAT 98, M. Carsi, F. Penlba, O.A. Ruano, and B.J. Fernández, CENIMCSIC, Madrid, 1998, p. 135.
17. H.K.D.H. Bhadeshia:Mater. Sci. Technol.. 1985, vol. 1, p. 497.10.1179/mst.1985.1.7.497 ↗
18. S.S. Babu, H.K.D.H. Bhadeshia and L.-E. Svensson:J. Mater. Sci. Lett.. 1991, vol. 10, p. 142.10.1007/BF02352829 ↗
19. S.S. Babu, and H.K.D.H. Bhadeshia:Mater. Sci. Technol.. 1990, vol. 6, p. 1005.10.1179/026708390790189605 ↗
20. C. García de Andrés, C. Capdevila, and F.G. Caballero, and H.K.D.H. Bhadeshia:Scripta Mater., 1998, vol. 39, pp. 853–59.10.1016/S1359-6462(98)00271-1 ↗
21. C. García de Andrés, G. Caruana, and L.F. Alvarez:Mater. Sci. Eng., 1998, vol. A241, p. 211.10.1016/S0921-5093(97)00491-7 ↗
22. J. Bardford, and W.S. Owen:J. Iron Steel Inst.. 1961, vol. 197, p. 146.
23. A.K. Sinha:Ferrous Physical Metallurgy, Butterworths, Boston, MA, 1989, p. 379.
24. K.C. Russell:Acta Metall.. 1968, vol. 16, p. 761.10.1016/0001-6160(68)90148-X ↗
25. H.K.D.H. Bhadeshia:Met. Sci.. 1982, vol. 16, p. 159.10.1179/030634582790427217 ↗
26. G. F. Vander Voort:Metallography. Principles and Practice, McGraw-Hill, New York, NY, 1984, p. 27.10.31399/asm.tb.mpp.9781627082600 ↗
27. C. García, L.F. Alvarez, and M. Carsí:Weld. Int.. 1982, vol. 6, p. 612.10.1080/09507119209548251 ↗
28. W.F. Lange, M. Enomoto, and H.I. Aaronson:Metall. Trans. A. 1988, vol. 19A, pp. 427–40.10.1007/BF02649256 ↗
29. R.H. Siller, and R.B. McLellan:Metall. Trans. A, 1970, vol. 1, pp. 985–88.10.1007/BF02811782 ↗
30. H.K.D.H. Bhadeshia:Met. Sci., 1981, vol. 15, p. 477.10.1016/0036-9748(81)90287-8 ↗
31. S.M. Hodson:MTDATA—Metallurgical and Thermomechanical Data-bank, National Physical Laboratory, Teddington, United Kingdom, 1989, p. 1.
32. H.K.D.H. Bhadeshia:Materials Algorithms Project (MAP), URL: www.msm.cam.ac.uk/map/steel/subs/ferr-b.html.
33. N. Ridley, H. Stuart, and L. Zwell:Trans. AIME, 1969, vol. 245, p. 1834.
34. D.J. Dyson, and B. Holmes:J. Iron Steel. Inst., 1970, vol. 208, p. 469.
35. N.A. Gjostein, H.A. Domian, H.I. Aaronson, and E. Eichen:Acta Metall., 1966, vol. 14, p. 1637.10.1016/0001-6160(66)90016-2 ↗
36. R.W.K. Honeycombe, and H.K.D.H. Bhadeshia:Steels: Microstructure and Properties, Edward Arnold, London, 1995, p. 5.
37. C. Atkinson, H.B. Aaron, K.R. Kinsman, and H.I. Aaronson:Metall. Trans. A.. 1973, vol. 4, pp. 783–92.10.1007/BF02643088 ↗
38. C. Zener:J. Appl. Phys.. 1949, vol. 20, p. 950.10.1063/1.1698258 ↗
39. J.W. Christian:Theory of Transformations in Metals and Alloys, 2nd ed., Pergamon, Oxford, United Kingdom, 1975, Part I, p. 482.
40. H.K.D.H. Bhadeshia:Progr. Mater. Sci.. 1985, vol. 29,. p. 321.10.1016/0079-6425(85)90004-0 ↗
41. G.J. Shiflet, J.R. Bradley, and H.I. Aaronson:Metall. Trans. A.. 1978, vol. 9A, pp. 999–1008.10.1007/BF02649845 ↗
42. J.B. Gilmour, G.R. Purdy, and J.S. Kirkaldy:Metall. Trans. A, 1972, vol. 3, pp. 3213–22.10.1007/BF02661336 ↗
43. C. Capdevila, C. Garcia de Andres, and H.K.D.H. Bhadeshia:Materials Algorithms Project (MAP), URL: www.msm.cam.ac.uk/map/steel/programs/ferr-b.html.
44. R.C. Reed, and H.K.D.H. Bhadeshia:Mater. Sci. Technol.. 1992, vol. 8, p. 421.10.1179/mst.1992.8.5.421 ↗