journal article·2011-09Open access

Phase Transformation Behavior of Porous TiNi Alloys Produced by Powder Metallurgy Using Magnesium as a Space Holder

Tarik Aydoğmuş, Elif Tarhan Bor, Şakir Bor

Abstract

Porous TiNi alloys with porosities in the range of 51 to 73 pct were prepared successfully applying a new powder metallurgy fabrication route in which magnesium was used as a space holder, resulting in either single austenite phase or a mixture of austenite and martensite phases dictated by the composition of the starting powders, but entirely free from secondary brittle intermetallics, oxides, nitrides, and carbonitrides. Since transformation temperatures are very sensitive to composition, deformation, and oxidation, for the first time, transformation temperatures of porous TiNi alloys were investigated using chemically homogeneous specimens in as-sintered and aged conditions eliminating secondary phase, contamination, and deformation effects. It was found that the porosity content of the foams has no influence on the phase transformation temperatures both in as-sintered and aged conditions, while deformation, oxidation, and aging treatment are severely influential.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. B.Y. Li, L.J. Rong, and Y.Y. Li: Mater. Sci. Eng. A, 2000, vol. 281, pp. 169–75.10.1016/S0921-5093(99)00729-7 ↗
2. D.C. Lagoudas and E.L. Vandygriff: J. Intell. Mater. Syst. Struct., 2002, vol. 13, pp. 837–50.10.1177/1045389X02013012009 ↗
3. B. Yuan, C.Y. Chung, X.P. Zhang, M.Q. Zeng, and M. Zhu: Smart Mater. Struct., 2005, vol. 14, pp. S201–S206.10.1088/0964-1726/14/5/005 ↗
4. B. Yuan, X.P. Zhang, C.Y. Chung, M.Q. Zeng, and M. Zhu: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 755–61.10.1007/s11661-006-0047-5 ↗
5. S. Wu, C.Y. Chung, X. Liu, P.K. Chu, J.P.Y. Ho, C.L. Chu, Y.L. Chan, K.W.K. Yeung, W.W. Lu, K.M.C. Cheung, and K.D.K. Luk: Acta Mater., 2007, vol. 55, pp. 3437–51.10.1016/j.actamat.2007.01.045 ↗
6. A. Bansiddhi and D.C. Dunand: Intermetallics, 2007, vol. 15, pp. 1612–22.10.1016/j.intermet.2007.06.013 ↗
7. A. Bansiddhi and D.C. Dunand: Acta Biomater., 2008, vol. 4, pp. 1996–2007.10.1016/j.actbio.2008.06.005 ↗
8. A. Bansiddhi, T.D. Sargeant, S.I. Stupp, and D.C. Dunand: Acta Biomater., 2008, vol. 4, pp. 773–82.10.1016/j.actbio.2008.02.009 ↗
9. B.Y. Li, L.J. Rong, Y.Y. Li, and V.E. Gjunter: Acta Mater., 2000, vol. 48, pp. 3895–3904.10.1016/S1359-6454(00)00184-1 ↗
10. C.L. Chu, C.Y. Chung, P.H. Lin, and S.D. Wang: J. Mater. Process. Technol., 2005, vol. 169, pp. 103–07.10.1016/j.jmatprotec.2005.03.002 ↗
11. C.Y. Chung, C.L. Chu, and S.D. Wang: Mater. Lett., 2004, vol. 58, pp. 1683–86.10.1016/j.matlet.2003.10.045 ↗
12. C.W. Goh, Y.W. Gu, C.S. Lim, and B.Y. Tay: Intermetallics, 2007, vol. 15, pp. 461–67.10.1016/j.intermet.2006.06.002 ↗
13. G. Tosun, L. Özler, M. Kaya, and N. Orhan: J. Alloys Compd., 2009, vol. 487, pp. 605–11.10.1016/j.jallcom.2009.08.023 ↗
14. C. Zanotti, P. Giuliani, P. Bassani, Z, Zhang, and A. Chrysanthou: Intermetallics, 2010, vol. 18, pp. 14–21.10.1016/j.intermet.2009.06.001 ↗
15. B. Yuan, C.Y. Chung, P. Huang, and M. Zhu: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 657–60.10.1016/j.msea.2005.12.077 ↗
16. X.P. Zhang, H.Y. Liu, B. Yuan, and Y.P. Zhang: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 170–73.10.1016/j.msea.2007.02.147 ↗
17. S.L. Zhu, X.J. Yang, D.H. Fu, L.Y. Zhang, C.Y Li, and Z.D. Cui: Mater. Sci. Eng. A, 2005, vol. 408, pp. 264–68.10.1016/j.msea.2005.08.012 ↗
18. B. Bertheville: Biomaterials, 2006, vol. 27, pp. 1246–50.10.1016/j.biomaterials.2005.09.014 ↗
19. S.K. Sadrnezhaad, H. Arami, H. Keivan, and R. Khalifezadeh: Mater. Manuf. Process., 2006, vol. 21, pp. 727–35.10.1080/10426910600727882 ↗
20. S.L. Zhu, X.J. Yang, F. Hu, S.H. Deng, and Z.D. Cui: Mater. Lett., 2004, vol. 58, pp. 2369–73.10.1016/j.matlet.2004.02.017 ↗
21. Y. Zhao, M. Taya, Y, Kang, and A. Kawasaki: Acta Mater., 2005, vol. 53, pp. 337–43.10.1016/j.actamat.2004.09.029 ↗
22. Y.P. Zhang, B. Yuan, M.Q. Zeng, C.Y. Chung, and X.P. Zhang: J. Mater. Process. Technol., 2007, vols. 192–193, pp. 439–42.10.1016/j.jmatprotec.2007.04.069 ↗
23. Y.P. Zhang, D.S. Li, and X.P. Zhang: Scripta Mater., 2007, vol. 57, pp. 1020–23.10.1016/j.scriptamat.2007.07.043 ↗
24. D.S. Li, Y.P. Zhang, G. Eggeler, and X.P. Zhang: J. Alloys Compd., 2009, vol. 470, pp. L1–L5.10.1016/j.jallcom.2008.02.059 ↗
25. D.S. Grummon, J.A. Shaw, and A. Gremillet: Appl. Phys. Lett., 2003, vol. 82, pp. 2727–29.10.1063/1.1569036 ↗
26. H. Guoxin, Z. Lixiang, F. Yunliang, and L. Yanhong: J. Mater. Process. Technol., 2008, vol. 206, pp. 395–99.10.1016/j.jmatprotec.2007.12.044 ↗
27. B. Yuan, X.P. Zhang, C.Y. Chung, and M. Zhu: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 585–88.10.1016/j.msea.2006.02.141 ↗
28. H. Li, B. Yuan, Y. Gao, C.Y. Chung, and M. Zhu: J. Mater. Sci., 2009, vol. 44, pp. 875–81.10.1007/s10853-008-3193-x ↗
29. P. Bassani, P. Giuliani, A. Tuissi, and C. Zanotti: J. Mater. Eng. Perform., 2009, vol. 18, pp. 594–99.10.1007/s11665-009-9493-8 ↗
30. A. Bansiddhi and D.C. Dunand: J. Mater. Eng. Perform., 2011, DOI: 10.1007/s11665-010-9827-6.10.1007/s11665-010-9827-6 ↗
31. B. Yuan, C.Y. Chung, and M. Zhu: Mater. Sci. Eng. A, 2004, vol. 382, pp. 181–87.10.1016/j.msea.2004.04.068 ↗
32. C.L. Chu, P.H. Lin, and C.Y. Chung: J. Mater. Sci., 2005, vol. 40, pp. 773–76.10.1007/s10853-005-6321-x ↗
33. C.L. Chu, C.Y. Chung, and P.H. Lin: Mater. Sci. Eng. A, 2005, vol. 392, pp. 106–11.10.1016/j.msea.2004.09.005 ↗
34. H.C. Jiang and L.J. Rong: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 883–86.10.1016/j.msea.2006.01.103 ↗
35. S.L. Wu, X.M. Liu, P.K. Chu, C.Y. Chung, C.L. Chu, and K.W.K. Yeung: J. Alloys Compd., 2008, vol. 449, pp. 139–43.10.1016/j.jallcom.2006.01.144 ↗
36. B.Y. Li, L.J. Rong, X.H. Luo, and Y.Y. Li: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2753–56.10.1007/s11661-999-0112-y ↗
37. O. Scalzo, S. Turenne, M. Gauthier, and V. Brailovski: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2061–70.10.1007/s11661-009-9906-1 ↗
38. T. Aydoğmuş and Ş. Bor: J. Alloys Compd., 2009, vol. 478, pp. 705–10.10.1016/j.jallcom.2008.11.141 ↗
39. ASTM F 2004-05, Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis, ASTM, Philadelphia, PA, 2010.
40. D.A. Miller and D.C. Lagoudas: Mater. Sci. Eng. A, 2001, vol. 308, pp. 161–75.10.1016/S0921-5093(00)01982-1 ↗
41. H. Funakubo: Shape Memory Alloys, 1st ed., Gordon and Breach Science Publishers S.A., Amsterdam, 1987, pp. 101–15.
42. K. Otsuka and C.M. Wayman: Shape Memory Materials, 1st ed., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 49–96.
43. V.G. Chuprina and I.M. Shalya: Powder Metall. Met. Cer., 2002, vol. 41, pp. 85–89.10.1023/A:1016020800727 ↗
44. I. Barin: Thermochemical Data of Pure Substances, 1st ed., VCH Verlagsgeselischaft, Weinheim, 1989, pp. 1083–1546.
45. G. Fan, W. Chen, S. Yang, J. Zhu, X. Ren, and K. Otsuka: Acta Mater., 2004, vol. 52, pp. 4351–62.10.1016/j.actamat.2004.06.002 ↗
46. J. Khalil-Allafi, X. Ren, and G. Eggeler: Acta Mater., 2002, vol. 50, pp. 793–803.10.1016/S1359-6454(01)00385-8 ↗
47. J. Khalil-Allafi, A. Dlouhy, and G. Eggeler: Acta Mater., 2002, vol. 50, pp. 4255–74.10.1016/S1359-6454(02)00257-4 ↗
48. K. Otsuka and X. Ren: Prog. Mater. Sci., 2005, vol. 50, pp. 511–678.10.1016/j.pmatsci.2004.10.001 ↗
49. K. Gall, K. Juntunen, H.J. Maier, H. Sehitoglu, and Y.I. Chumlyakov: Acta Mater., 2001, vol. 49, pp. 3205–17.10.1016/S1359-6454(01)00223-3 ↗