On the Relationship Between Deformation-Induced Surface Roughness and Plastic Strain in AA5052—Is it Really Linear?
Source abstract
Abstract
Three different heat treatments of aluminum alloy AA5052 were subjected to various levels of uniaxial plastic strain. The resulting surfaces were then evaluated using both scanning laser confocal microscopy (SLCM) and stylus profilometry. Three regression approaches were used to assess the quality of a linear and a curvilinear fit for the roughness data as a function of true plastic strain. While there were differences among the regression results, the analyses revealed that a linear model was more statistically appropriate for the finest grain size. As the grain size increased, the surface morphology became more complex and a quadratic model became more suitable. Since the relative area fractions of grain boundary–localized roughness and slip-induced roughness are grain size dependent, the higher order fit between the roughness and plastic strain reflects substantial changes in the ratio of these areas. The differences between the SLCM and profilometry results were attributed to the natural filtering that occurs during contact profilometry. This filtering skewed the roughness data toward the largest surface displacements, thereby reducing the measurement fidelity to the point where the only possible outcome was the linear relationship.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Optical measurement and interference techniques · Surface Roughness and Optical Measurements · Thermography and Photoacoustic Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. W.K. Liu, L. Siad, R. Tian, S. Lee, D. Lee, X.L. Yin, W. Chen, S. Chan, G.B. Olson, L.E. Lindgen, M.F. Horstemeyer, Y.S. Chang, J.B. Choi, and Y.J. Kim: Int. J. Numer. Methods Eng., 2009, vol. 80, pp. 932–78.10.1002/nme.2578 ↗
2. K. Thornton, S. Nola, R.E. Garcia, M. Asta, and G.B. Olson: JOM, 2009, vol. 61, pp. 12–17.10.1007/s11837-009-0142-3 ↗
3. T.V. Vorburger, H.G. Rhee, T.B. Renegar, J.F. Song, and A. Zheng: Int. J. Adv. Manufact. Technol., 2007, vol. 33, pp. 110–18.10.1007/s00170-007-0953-8 ↗
4. H. Rhee, T.V. Vorburger, J.W. Lee, and J. Fu: Appl. Optics, 2005, vol. 44, pp. 5919–27.10.1364/AO.44.005919 ↗
5. J.S. Bendat and A.G. Piersol: Random Data—Analysis and Measurement Procedures, John Wiley & Sons, New York, NY, 1986, pp. 1–566.
6. M.R. Stoudt and J.B. Hubbard: Acta Mater., 2005, vol. 53, pp. 4293–4304.10.1016/j.actamat.2005.05.038 ↗
7. M.R. Stoudt and R.E. Ricker: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2883–89.10.1007/s11661-002-0273-4 ↗
8. W.R.D. Wilson and W. Lee: J. Manuf. Sci. Eng., 2001, vol. 123, pp. 279–83.10.1115/1.1363596 ↗
9. I. Shimizu, T. Okuda, T. Abe, and H. Tani: JSME Int. J. A, 2001, vol. 44, pp. 499–506.10.1299/jsmea.44.499 ↗
10. Y.Z. Dai and F.P. Chiang: J. Eng. Mater. Technol., 1992, vol. 114, pp. 432–38.10.1115/1.2904196 ↗
11. N. Kawai, T. Nakamura, and Y. Ukai: Bull. JSME, 1986, vol. 29, pp. 1337–43.10.1299/jsme1958.29.1337 ↗
12. T. Abe, S. Nagaki, and T. Akase: Bull. JSME, 1985, vol. 28, pp. 251–58.10.1299/jsme1958.28.251 ↗
13. K. Osakada and M. Oyane: Bull. JSME, 1971, vol. 14, pp. 171–77.10.1299/jsme1958.14.171 ↗
14. A. Perron, O. Politano, and V. Vignal: Surf. Interface Anal., 2008, vol. 40, pp. 518–21.10.1002/sia.2849 ↗
15. M.R. Stoudt, J.B. Hubbard, and S.A. Janet: Mater. Sci. Technol., 2008, vol. 24, pp. 253–60.10.1179/174328407X236562 ↗
16. P.D. Wu and D.J. Lloyd: Acta Mater., 2004, vol. 52, pp. 1785–98.10.1016/j.actamat.2003.12.039 ↗
17. U. Borg and N.A. Fleck: Strain Gradient Effects in Surface Roughening, 2007, Iop Publishing Ltd., Bristol, United Kingdom, pp. S1–S12.
18. Anon.: Aluminum Standards and Data 2003, The Aluminum Association, Washington, DC, 2003, pp. 1–235.
19. Anon.: 2000 Annual Book of ASTM Standards, Section 3, Metals Test Methods and Analytical Procedures, ed., ASTM, Philadelphia, PA, 2000, pp. 240–63.
20. G.F. VanderVoort: Metallography Principles and Practice, ASM INTERNATIONAL, Materials Park, OH, 1999, pp. 1–752.
21. M.R. Stoudt, J.B. Hubbard, M.A. Iadicola, and S.W. Banovic: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1611–22.10.1007/s11661-009-9881-6 ↗
22. M.R. Stoudt, J.B. Hubbard, S.P. Mates, and D.E. Green: SAE Trans. J. Mater. Manufact., 2006, vols. 114–115, pp. 183–90.
23. Anon.: ASME Designation B46.1-2002: Surface Texture (Surface Roughness, Waviness and Lay), ASME, New York, NY, 2002, pp. 1–98.
24. T.R. Thomas: Rough Surfaces, Imperial College Press, London, 1999, pp. 1–278.
25. W. Chu, J. Fu, R. Dixson, G. Orji, and T. Vorburger: Rev. Sci. Instrum., 2009, vol. 80. DOI:07370910.1063/1.3189041.
26. J. Song, T. Vorburger, T. Renegar, H. Rhee, A. Zheng, L. Ma, J. Libert, S. Ballou, B. Bachrach, and K. Bogart: Meas. Sci. Technol., 2006, vol. 17, pp. 500–03.10.1088/0957-0233/17/3/S07 ↗
27. L.C. Hamilton: Regression with Graphics: A Second Course in Applied Statistics, Brooks/Cole Publishing Company, Pacific Grove, CA, 1992, pp. 1–363.
28. Anon.: F-Test, Wikipedia, The Free Encyclopedia, 2009.
29. R.E. Walpole and R.H. Myers: Probability and Statistics for Engineers and Scientists, The Macmillan Co., New York, NY, 1972, pp. 1–506.
30. M.J. Crawley: Statistical Computing: An Introduction to Data Analysis Using S-Plus, John Wiley & Sons, New York, NY, 2002, pp. 1–761.
31. W. Fuller: Measurement Error Models, John Wiley, New York, NY, 1987, pp. 1–440.10.1002/9780470316665 ↗
32. J. Filliben and N.A. Heckert: Dataplot, NIST, Gaithersburg, MD, 1978.
33. V. Radhakrishnan: Wear, 1970, vol. 16, pp. 325–35.10.1016/0043-1648(70)90099-2 ↗
34. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24.
35. M.F. Ashby: Phil. Mag., 1970, vol. 21, pp. 399–424.10.1080/14786437008238426 ↗