journal article·2007-10

Texture Development in a Cold-Rolled and Annealed Body-Centered-Cubic Mg-Li Alloy

G.J. Shen, B.J. Duggan

Publisher page

Abstract

The rolling and annealing textures formed in bcc Mg 14 wt pct Li have been investigated and compared with interstitial-free (IF) and more heavily alloyed ferritic steel rolled at the same temperature. The α fiber texture component ( //rolling direction) is very strong after 90 pct rolling at room temperature; however, there is evidence that the γ fiber ({111}//rolling plane) weakens with increasing rolling strain to give a peaklike texture centered on {111} . A rarely found cold rolling fiber texture has been identified, which has {100}//rolling plane and peaks at {100} . Annealing at 200 °C very rapidly produces {554} , which gives way to components near {111} on grain growth. The α fiber is destroyed by recrystallization; however, the {100}//rolling plane fiber shifts intensity from the as-rolled orientation {100} to {100} . Since texture largely determines drawability, the best that can be achieved in terms of press performance of this alloy is most likely a Lankford parameter of unity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. W.A. Freeth and G.V. Raynor: J. Inst. Met.,1954, vol. 82, pp. 569–74
2. I.J. Polmear: Light Metals, 3rd ed., Butterworth and Heinemann, Oxford, 1995
3. T. Leffers: Phys. Status Solidi, 1968, vol. 25, pp. 337–4510.1002/pssb.19680250133 ↗
4. T. Leffers: Text. Res. Pract., 1968
5. R.E. Smallman, D. Green: Acta Metall., 1964, vol. 12, pp. 145–5410.1016/0001-6160(64)90182-8 ↗
6. I.L. Dillamore, W.T. Roberts: Metall. Rev., 1965, vol. 10, pp. 271–8010.1179/095066065790138348 ↗
7. D. Raabe, K. Lücke: Scripta Mater., 1992, vol. 26, pp. 1221–2610.1016/0956-716X(92)90567-X ↗
8. S. Mishra, C. Därmann, K. Lücke: Metall. Trans. A, 1986, vol. 17A, pp. 1301–1210.1007/BF02650111 ↗
9. D. Schläfer, H.J. Bunge: Texture, 1974, vol. 1, pp. 157–6710.1155/TSM.1.157 ↗
10. H. Saka, G. Taylor: Philos. Mag. A, 1981, vol. 43, pp. 1377–9210.1080/01418618108239516 ↗
11. K. Kitajima, Y. Aono, H. Abe, E. Kuramoto: in Strength of Metals and Alloys, P. Haasen, V. Gerold, G. Kostorz, eds., Pergamon, Oxford, United Kingdom, 1979, pp. 965–7110.1016/B978-1-4832-8412-5.50161-2 ↗
12. A.M. Russell, L.S. Chumbley, V.B. Gantovnik, K. Xu, Y. Tian, F.C. Laabs: Scripta Mater., 1998, vol. 39, pp. 1663–6710.1016/S1359-6462(98)00379-0 ↗
13. M.R. Barnett, J.J. Jonas: ISIJ Int., 1997, vol. 37, pp. 697–70510.2355/isijinternational.37.697 ↗
14. M.Z. Quadir, B.J. Duggan: Acta Mater., 2004, vol. 52, pp. 4011–2110.1016/j.actamat.2004.05.017 ↗
15. D. Raabe: Mater. Sci. Technol., 1995, vol. 11, pp. 461–6810.1179/mst.1995.11.5.461 ↗
16. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24
17. H. Honeff and H. Mecking: Proc. 5th Int. Conf. on Texture of Materials, Berlin, Germany, 1978, pp. 265–7110.1007/978-3-642-81313-9_24 ↗
18. P. Van Houtte: Mater. Sci. Eng., 1982, vol. 55, pp. 69–7710.1016/0025-5416(82)90085-4 ↗
19. W.B. Hutchinson: Int. Met. Rev., 1984, vol. 29, pp. 25–4210.1179/imtr.1984.29.1.25 ↗
20. W.B. Hutchinson: Acta Metall., 1989, vol. 37, pp. 1047–5610.1016/0001-6160(89)90101-6 ↗
21. T. Senuma, K. Kawasaki: ISIJ Int., 1994, vol. 34, pp. 51–6610.2355/isijinternational.34.51 ↗
22. Y.Y. Tse, G.L. Liu, B.J. Duggan: Scripta Metall., 2000, vol. 42, pp. 25–3010.1016/S1359-6462(99)00303-6 ↗
23. Y.Y. Tse, B.J. Duggan: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1055–6410.1007/s11661-006-0078-y ↗
24. M.Z. Quadir, K.T. Lam and B.J. Duggan: Proc. Inst. Mech. Eng., 2004, vol. 218, Part C, pp. 631–3910.1243/095440604774202277 ↗
25. D.V. Wilson: J. Inst. Met., 1966, vol. 94, pp. 84–93