journal article·2004-09

Characterization of the peritectic reaction in medium-alloy steel through microsegregation and heat-of-transformation studies

Brij K. Dhindaw, Tomas Antonsson, Hasse Fredriksson, Jose Tinoco

Publisher page

Abstract

In the present work, the phenomenon of the peritectic reaction was characterized in a medium-alloy steel. Several directional solidifcation and thermal-analysis experiments were done to investigate the reaction process. Directional solidification experiments carried out did not tend to show any direct evidence of a peritectic reaction. Microsegregation studies on the directionally solidified samples and those solidified under isothermal conditions bring out some interesting features. It has been documented that if the segregation ratio for Ni is higher than that for Cr, there is a correlation that the peritectic reaction had occurred in that region. On the other hand, a higher Cr segregation ratio as compared to Ni showed the possibility that the liquid had directly transformed to γ-austenite without undergoing a peritectic reaction. Measurement of energies of transformations and the analysis of their values in different segments of the cooling-curve differential thermal analysis (DTA) experiments have helped in understanding the peritectic reaction. It is revealed that the transformation is more like diffusionless transformation, where γ-austenite directly precipitates from δ-ferrite. Indeed, this proposition is also supported by the segregation patterns for Cr and Ni obtained in the solidified samples of this steel during directional solidifcation and DTA experiments and also by calculations to show the presence of enough lattice defects or vacancies to aid the aforementioned transformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. H. Fredriksson: Met. Sci., 1976, vol. 10, pp. 77–86.10.1016/0036-9748(76)90332-X ↗
2. H. Fredriksson and J. Stjerndahl: Met. Sci., 1982, vol. 16, pp. 575–85.10.1016/0036-9748(82)90273-3 ↗
3. Y.K. Chuang, D. Reinisch, and K. Schwerdtfeger: Metall. Trans. A, 1975, vol. 6A, pp. 235–38.10.1007/BF02673703 ↗
4. H. Fredriksson and T. Nylen: Met. Sci., 1982, vol. 16, pp. 283–94.10.1179/030634582790427370 ↗
5. T. Takahashi, K. Ohsasa, and J. Tanaka: Tetsu-to-Hagané, 1987, vol. 73, pp. 99–106.10.2355/tetsutohagane1955.73.1_99 ↗
6. H. Shibata, Y. Arai, M. Suzuki, and T. Emi: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 981–91.10.1007/s11663-000-0074-3 ↗
7. A Guide to the Solidification of Steels, Jernkontoret, Research Committee 408/74, Stockholm, 1977, p. 16.
8. M. Hillert: Fasovandlingar Grundkurs II, Institutionen för Metallografi, Royal Institute of Technology, Stockholm, 1986, p. Fe41 (in Swedish).
9. M. El-Bealy: Ph.D. Thesis, Royal Institute of Technology, Stockholm, 1995.
10. H. Fredriksson: Proc. Int. Conf. on Solidification, July, 18–21, 1977, The Metals Society, London, pp. 131–38.
11. F. Oeters and K. Sardemann: Mechanismus der Spaltbildung Zwischen Block und Kokille bei Block und Strangguss, Arch. Eisenhuttenwes., 1974, vol. 45(11), pp. 737–43 (in German).
12. P. Shewmon: Diffusion in Solids, 2nd ed., TMS, Warrendale, PA, p. 78.
13. K. Hansson: Ph.D. Thesis, Royal Institute of Technology, Stockholm, 2001.
14. S. Berg, John Dahlstrom, and Hasse Fredriksson: Iron Steel Inst. Jpn. Int., 1995, vol. 35 (7), pp. 876–85.10.2355/isijinternational.35.876 ↗