Mechanical Property Enhancement of Ti-6Al-4V by Multilayer Thin Solid Film Ti/TiO2 Nanotubular Array Coating for Biomedical Application
Source abstract
Abstract
With the intention of improving the mechanical properties of Ti-6Al-4V, samples were first coated with pure titanium using the physical vapor deposition (PVD) magnetron sputtering technique. The Taguchi optimization method was used to attain a higher coating on substrate adhesion. Second, pure titanium-coated samples with higher adhesion were anodized to generate TiO2 nanotubes. Next, the TiO2-coated specimens were heat treated at annealing temperatures of 753.15 K and 923.15 K (480 °C and 650 °C). The XRD results indicate that the varying heat treatment temperatures produced different phases, namely, anatase [753.15 K (480 °C)] and rutile [923.15 K (650 °C)]. Finally, the coated samples’ mechanical properties (surface hardness, adhesion, and fretting fatigue life) were investigated. The fretting fatigue lives of TiO2-coated specimens at 753.15 K and 923.15 K (480 °C and 650 °C) annealing temperatures were significantly enhanced compared to uncoated samples at low and high cyclic fatigue. The results also indicate that TiO2-coated samples heat treated at an annealing temperature of 753.15 K (480 °C) (anatase phase) are more suitable for increasing fretting fatigue life at high cyclic fatigue (HCF), while at low cyclic fatigue, the annealing temperature of 923.15 K (650 °C) seemed to be more appropriate. The fretting fatigue life enhancement of thin-film TiO2 nanotubular array-coated Ti-6Al-4V is due to the ceramic nature of TiO2 which produces a hard surface as well as a lower coefficient of friction of the TiO2 nanotube surface that decreases the fretting between contacting components, namely, the sample and friction pad surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. M. Niinomi, Metall. Mater. Trans A, 32A (2001) pp. 477-86.
2. M. Niinomi, Mater. Trans., Vol. 49, No. 10 (2008) pp. 2170-78.10.2320/matertrans.L-MRA2008828 ↗
3. M. Niinomi: Biomaterials, 24 (2003) 2673–83.10.1016/S0142-9612(03)00069-3 ↗
4. A.P. Tomsia, E. Saiz, J. Song, C.R. Bertozzi, Adv. Eng. Mater. 7(11) (2005) 999–1004.10.1002/adem.200500143 ↗
5. G.B. de Souza, G.G. de Lima, N.K. Kuromoto, P. Soares, C.M. Lepienski, C.E. Foerster, A. Mikowski, J. Mech. Behav. Biomed. Mater. 4/5 (2011) 796–806.10.1016/j.jmbbm.2010.09.012 ↗
6. G.B. de Souza, C.M. Lepienski, C.E. Foerster, N.K. Kuromoto, P. Soares, H.A. Ponte, J. Mech. Behav. Biomed. Mater. 4/5 (2011) 756–65.10.1016/j.jmbbm.2010.07.005 ↗
7. S.J. Ding, C.P. Ju, J.H.C. Lin, J. Biomed. Mater. Res. A 47/4 (1999) 551–63.10.1002/(SICI)1097-4636(19991215)47:4<551::AID-JBM12>3.0.CO;2-C ↗
8. D.M. Ebenstein, L.A. Pruitt, Nano Today 1/3 (2006) 26–33.10.1016/S1748-0132(06)70077-9 ↗
9. X. Fan, Y. Zhang, P. Xiao, F. Hu, H. Zhang, J. Chem. Phys. 20 (2007) 753–58.
10. M. Farooq, Z.H. Lee, J. Korean Phys. Soc. 40/3 (2002) 511–15.
11. S. Gangopadhyay, R. Acharya, A.K. Chattopadhyay, S. Paul, Vacuum 84/6 (2010) 843–50.10.1016/j.vacuum.2009.11.010 ↗
12. A. Kar, K. Raja, M. Misra, Surf. Coat. Technol. 201/6 (2006) 3723–31.10.1016/j.surfcoat.2006.09.008 ↗
13. P. Kelly, R. Arnell, Vacuum 56/3 (2000) 159–72.10.1016/S0042-207X(99)00189-X ↗
14. A. Kodama, S. Bauer, A. Komatsu, H. Asoh, S. Ono, P. Schmuki, Acta Biomater. 5/6 (2009) 2322–30.10.1016/j.actbio.2009.02.032 ↗
15. K.S. Lee, I.S. Park, Scripta Mater. 48/6 (2003) 659–63.10.1016/S1359-6462(02)00561-4 ↗
16. S. Baradaran, W.J. Basirun, E. Zalnezhad, M. Hamdi, Ahmed A.D. Sarhan, Y. Alias (2013) J. Mech. Behav. Biomed. 20, 272–82.10.1016/j.jmbbm.2013.01.020 ↗
17. T. Sultana, G.L. Georgiev, R.J. Baird, G.W. Auner, G. Newaz, R. Patwa, H.J. Herfurth, J. Mech. Behav. Biomed. 2 (2009) 237–42.10.1016/j.jmbbm.2008.07.004 ↗
18. S. Li, J. Yin, G. Zhang, Sci. China 53/5 (2010) 1068–73.10.1007/s11426-010-0155-3 ↗
19. S.Q. Liu, Bioregenerative Engineering: Principles and Applications, Wiley, Hoboken, NJ, (2007).10.1002/0470116862 ↗
20. J. Macak, H. Hildebrand, U. Marten-Jahns, P. Schmuki, J. Electroanal. Chem. 621/2 (2008) 254–66.10.1016/j.jelechem.2008.01.005 ↗
21. M. Mayo, R. Siegel, A. Narayanasamy, W. Nix, J. Mater. Res. 5/05 (1990) 1073–82.10.1557/JMR.1990.1073 ↗
22. V. Nelea, C. Morosanu, M. Iliescu, I. Mihailescu, Surf. Coat. Technol. 173/2 (2003) 315–22.10.1016/S0257-8972(03)00729-1 ↗
23. J.M. Macák, H. Tsuchiya, A. Ghicov, and P. Schmuki: Electrochem. Commun., 2005, vol. 7 (11), pp. 1133–37.10.1016/j.elecom.2005.08.013 ↗
24. M. Metikoš-Hukovič, A. Kwokal, and J. Piljac: Biomaterials, 2003, vol. 24, pp. 3765–75.10.1016/S0142-9612(03)00252-7 ↗
25. ISO Standard: Metallic Materials—Rotating Bar Bending Fatigue Testing, ISO International, 2010.
26. J.A. Ghani, I.A. Choudhury, H.H. Hassan, J. Mater. Process. Technol. 145/1 (2004) 84–92.10.1016/S0924-0136(03)00865-3 ↗
27. J.A. Toque, M.K. Herliansyah, M. Hamdi, A. Ide-Ektessabi, I. Sopyan, J. Mech. Behav. Biomed. Mater. 3/4 (2010) 324–30.10.1016/j.jmbbm.2010.01.002 ↗
28. K. Singh, N. Krishnamurthy, A.K. Suri, Tribol. Int. 50/0 (2012) 16–25.10.1016/j.triboint.2011.12.023 ↗
29. G. Crawford, N. Chawla, J. Houston, J. Mech. Behav. Biomed. Mater. 2/6 (2009) 580–87.10.1016/j.jmbbm.2008.10.004 ↗
30. Z. Hashin, B.W. Rosen, J. Appl. Mech., 31 (1964), pp. 223–32.10.1115/1.3629590 ↗
31. Y. Al-Khatatbeh, K.K. M. Lee, B. Kiefer, J. Phys. Chem. C. 116 (2012) 21635–39.10.1021/jp3075699 ↗
32. W.Y. Chang, T.H. Fang, Z.W. Chiu, Y.J. Hsiao, L.W. Ji, Microporous Mesoporous Mater. 145/1 (2011) 87–92.10.1016/j.micromeso.2011.04.035 ↗
33. A. Sadeghzadeh Attar, M. Sasani Ghamsari, F. Hajiesmaeilbaigi, S. Mirdamadi, K. Katagiri, K. Koumoto (2008) J. Mater. Sci. 43(17), 5924–29.10.1007/s10853-008-2872-y ↗
34. M.R. VanLandingham, J. Res. Natl Inst. Stand. Technol. 108/4 (2003) 249–65.10.6028/jres.108.024 ↗
35. T. Shokuhfar, G.K. Arumugam, P.A. Heiden, R.S. Yassar, C. Friedrich, ACS Nano 3/10 (2009) 3098–3102.10.1021/nn900202x ↗
36. B. Rajasekaran, S. Ganesh Sundara Raman, L. Rama Krishna, S.V. Joshi, G. Sundararajan (2008) Surf. Coat. Technol. 202(8) 1462–69.10.1016/j.surfcoat.2007.06.058 ↗
37. Y. Sun, K. Yan, G. Wang, W. Guo, T. Ma, J. Phys. Chem. C. 115 (2011), 12844–49.10.1021/jp1116118 ↗
38. G. Majzoobi, M. Jaleh, Mater. Sci. Eng. A 452 (2007) 673–81.10.1016/j.msea.2006.11.007 ↗
39. X. Zhang, D. Liu, Trans. Nonferrous Mater. Soc. China 19/3 (2009) 557.10.1016/S1003-6326(08)60312-X ↗
40. L. Pazos, P. Corengia, H. Svoboda, J. Mech. Behav. Biomed. Mater. 3/6 (2010) 416–24.10.1016/j.jmbbm.2010.03.006 ↗
41. E. Zalnezhad, A.A.D. Sarhan, M. Hamdi (2012) Int. J. Precision Eng. Manuf. 13, 1453–59.10.1007/s12541-012-0191-3 ↗
42. A. Vadiraj, M. Kamaraj, Tribol. Int. 40/1 (2007) 82–88.10.1016/j.triboint.2006.02.064 ↗