Investigation of Carbide Precipitation Process and Chromium Depletion during Thermal Treatment of Alloy 690
Source abstract
Abstract
For the purpose of studying the effect of heat treatment on carbide morphology and chromium concentration distribution, which are critical to the resistance of alloy 690 to stress corrosion cracking (SCC), a series of thermal treatments was performed. A model taking into account the intercorrelated dynamic process between the carbide precipitation and chemical diffusion of the chromium atom from matrix to grain boundary (GB) was constructed on the basis of classical nucleation theory, Kolmogorov–Johnson–Mehl–Avrami law, and diffusion theory. The validity of this model was evaluated by comparing the simulated results of the carbide average size and chromium concentration near the GB with the corresponding measured results. A discontinuous factor was introduced based on the relation linking the interdistance between the carbides and the carbide average size; thus, the carbide morphology and chromium concentration could be predicted by this model. According to the results of the experiments and simulations, a carbide discontinuous factor smaller than 2.2 together with the chromium concentration at the GB higher than a critical value (21 wt pct) were essential for the corrosion resistance ability of the alloy, and then some proper heat-treatment conditions were obtained through predicting the value of the two variables. In addition, the effects of the grain size and composition variation on the carbide discontinuous factor and chromium concentration profile were simulated. The results indicated that an intermediate grain size of approximately 31.8 to ~63.5 μm was beneficial for effectively improving the resistance of the alloy to SCC. Simultaneously, the carbon content should be adjusted near 0.02 pct, and the chromium content should be the highest possible in its chemical composition scale.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. R.J. Lemire and G.A. McRae: J. Nucl. Mater., 2001, vol. 294, pp. 141–47.10.1016/S0022-3115(01)00468-8 ↗
2. O.S. Tatone: Nucl. Eng. Int., 1986, vol. 31 (383), pp. 81–83.
3. R.S. Dutta, A. Lobo, R. Purandare, S.K. Kulkarni, and G.K. Dey: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1437–47.10.1007/s11661-002-0067-8 ↗
4. P. Sengupta, N. Soudamini, C.P. Kaushik, Jagannath, R.K. Mishra, G.B. Kale, K. Raj, D. Das, and B.P. Sharma: J. Nucl. Mater., 2008, vol. 374 (1–2), pp. 185–91.10.1016/j.jnucmat.2007.08.005 ↗
5. W.T. Tsai and T.F. Wu: J. Nucl. Mater., 2000, vol. 277 (2–3), pp. 169–74.10.1016/S0022-3115(99)00209-3 ↗
6. J.G. Gonzalez-Rodriguez, M. Casales, M.A. Espinoza-Medina, C. Angeles-Chavez, G. Izquierdo, and R. Guardian: Mater. Charact., 2003, vol. 51 (5), pp. 309–14.10.1016/j.matchar.2004.01.004 ↗
7. M. Casales, M.A. Espinoza-Medina, A. Martinez-Villafane, and J.G. Gonzalez-Rodriguez: Corrosion, 2000, vol. 56 (11), pp. 1133–39.10.5006/1.3294398 ↗
8. F. Carrette, M.C. Lafont, L. Leqras, L. Guinard, and B. Pieraqqi: Mater. High Temp., 2003, vol. 20 (4), pp. 581–91.10.3184/096034003782750204 ↗
9. E.A. West and G.S. Was: Trans. Am. Nucl. Soc., 2008, vol. 98, pp. 1087–88.
10. R.S. Dutta, R. Tewari, and P.K. De: Corros. Sci., 2007, vol. 49 (2), pp. 303–18.10.1016/j.corsci.2006.05.043 ↗
11. Y.Y. Chen, L.B. Chou, and H.C. Shih: Mater. Sci. Eng., A, 2005, vol. 396 (1–2), pp. 129–37.10.1016/j.msea.2005.01.026 ↗
12. B. Peng, B.T. Lu, J.L. Luo, Y.C. Lu, and H.Y. Ma: J. Nucl. Mater., 2008, vol. 378 (3), pp. 333–40.10.1016/j.jnucmat.2008.06.037 ↗
13. Y.Y. Chen, L.B. Chou, and H.C. Shih: Mater. Chem. Phys., 2006, vol. 97 (1), pp. 37–49.10.1016/j.matchemphys.2005.07.053 ↗
14. W.T. Tsai and C.H. Chou: Mater. Sci. Eng., A, 2000, vol. 288 (1), pp. 5–11.10.1016/S0921-5093(00)00905-9 ↗
15. B.A. Young, X.S. Gao, T.S. Srivatsan, and P.J. King: Mater. Des., 2007, vol. 28 (2), pp. 373–79.10.1016/j.matdes.2005.10.001 ↗
16. M. Casales, V.M. Salinas-Bravo, A. Martinez-Villafane, and J.G. Gonzalez-Rodriguez: Mater. Sci. Eng., 2002, vol. A332, pp. 223–30.10.1016/S0921-5093(01)01747-6 ↗
17. T.M. Angeliu and G.S. Was: Metall. Trans. A, 1990, vol. 21A, pp. 2097–2107.10.1007/BF02647868 ↗
18. K. Stiller, J.O. Nilsson, and K. Norring: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 327–41.10.1007/BF02648410 ↗
19. J.J. Kai, G.P. Yu, C.H. Tsai, M.N. Liu, and S.C. Yao: Metall. Trans. A, 1989, vol. 20A, pp. 2057–67.10.1007/BF02650292 ↗
20. G. Sui, J.M. Titchmarsh, G.B. Heys, and J. Congleton: Corros. Sci., 1997, vol. 39 (3), pp. 565–87.10.1016/S0010-938X(97)86103-3 ↗
21. P.K. De and S.K. Ghosal: Corrosion, 1981, vol. 37 (6), pp. 341–49.10.5006/1.3577283 ↗
22. S.L. Yun, P.K. Hong, H.H. Jeong, S.K. Joung, and S.K. Hyuk: Corros. Sci., 2001, vol. 43 (7), pp 1321–35.10.1016/S0010-938X(00)00149-9 ↗
23. J.M. Zagal, H.F. Lopez, O. Flores, J.L. Albarran, and L. Martinez: Corros. Sci., 2008, vol. 50 (12), pp. 3371–77.10.1016/j.corsci.2008.08.042 ↗
24. S.M. Brummer and C.H. Henaqer: Scripta Metall., 1986, vol. 20 (6), pp. 909–14.10.1016/0036-9748(86)90465-5 ↗
25. G.S. Was and V.B. Rajan: Metall. Trans. A, 1987, vol. 18A, pp. 1313–23.10.1007/BF02647201 ↗
26. C.L. Briant, C.S. O’Toole, and E.L. Hall: Corrosion, 1986, vol. 42 (1), pp. 15–27.10.5006/1.3584874 ↗
27. H. Hsahlaoui, H. Sidhom, and J. Philibert: Acta Mater., 2002, vol. 50 (6), pp. 1383–92.10.1016/S1359-6454(01)00444-X ↗
28. Y.F. Yin and R.G. Faulkner: Corros. Sci., 2007, vol. 49 (5), pp. 2177–97.10.1016/j.corsci.2006.10.022 ↗
29. N. Saunders: Superalloys 1996, Proceedings of the 8th International Symposium, The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 1996, pp. 101–10.10.7449/1996/Superalloys_1996_101_110 ↗
30. F.R. Beckitt and B.R. Clark: Acta Mater., 1967, vol. 15, pp. 113–29.10.1016/0001-6160(67)90159-9 ↗
31. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19 (1–2), pp. 35–50.10.1016/0022-3697(61)90054-3 ↗
32. C. Wagner: Z. Elektrochem., 1961, vol. 65 (7–8), pp. 581–91.
33. Y.N. Yu: Foundation of Materials Science, Higher Education Press, Beijing, 2006, pp. 594–633.
34. E.A. Trillo and L.E. Murr: Acta Mater., 1999, vol. 47 (1), pp. 235–45.10.1016/S1359-6454(98)00322-X ↗
35. W.B. Pearson and M.A. Phil: A Handbook of Lattice Spacings and Structures of Metals and Alloys, Pergamon Press, London, 1956, pp. 776–80.
36. J.S. Lu, B. Wang, and Y.C. Yao: Handbook of X-Ray Diffraction Line Identification in Steel and Alloys, China Iron & Steel Research Institute, Beijing, 1990, pp. 19–62.
37. A. Morawiez, J.A. Szpunar, and D.C. Hunz: Acta Metall. Mater., 1993, vol. 41 (10), pp. 2825–32.10.1016/0956-7151(93)90097-C ↗
38. Q.L. Yong, Y.F. Li, B.Z. Sun, and B.R. Wu: Acta Metall., 1988, vol. 10 (5), pp. A373–A375.
39. ASM Metals Handbook, ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2, pp. 1387–88.
40. Inconel Alloy 690, Special Metals Corporation, Huntington, 2004, pp. 1–8.
41. R. Kampmann and R. Wagner: Decomposition of Alloys, Pergamon Press, Oxford, 1984, pp. 91–103.10.1016/B978-0-08-031651-2.50018-5 ↗
42. G. Han, J. He, S. Fukuyama, and K. Yokogawa: Acta Mater., 1998, vol. 46 (13), pp. 4559–70.10.1016/S1359-6454(98)00136-0 ↗
43. “ASTM E112 Standard Test Methods for Determining Average Grain Size,” ASTM Book of Standards, ASTM International, West Conshohocken, PA, 2004, vol. 03.01, 26 pp.