journal article·2018-03

Deformation Behavior and Evolution of Microstructure and Texture During Hot Compression of AISI 304LN Stainless Steel

Matruprasad Rout, Somjeet Biswas, Ravi Ranjan, Surjya Kanta Pal, Shiv Brat Singh

Publisher page

Abstract

Deformation behavior of hot-rolled AISI 304 LN austenitic stainless steel was studied by hot axisymmetric compression tests at 1173 K, 1273 K, and 1373 K (900 °C, 1000 °C, and 1100 °C) at strain rates of 0.01, 0.1, and 1 s−1. The flow curves were examined to understand the deformation characteristics. The influence of Zener–Holloman parameter was analyzed using appropriate constitutive models. The activation energy for deformation was found to be 473 kJ/mol. Quantitative microstructural analysis was carried out using Electron backscattered diffraction. Compression at 1173 K (900 °C) at all true strain rates gave rise to partially dynamic recrystallized microstructure with strong α-fiber texture. The deformation texture is characterized by the formation of Brass component, and partial dynamic recrystallization (DRX) led to the development of Goss, S, and ube components. Necklace structure of small equiaxed recrystallized grains could be observed surrounding the large, elongated deformed grains. Compressions at 1273 K and 1373 K (1000 °C and 1100 °C) resulted in fully recrystallized microstructure consisting of mostly Σ3 and Σ9 coincidence site lattice high-angle boundaries. Compression at 1273 K (1000 °C) leads to the formation of low-intensity diffused α-fiber. DRX was confirmed by the presence of Goss, S, Cube, and rotated Cube components. Compression performed at 1373 K (1100 °C) resulted in nearly random texture with traces of α-fiber and prominent Cube/rotated Cube components. The microstructures of the 1173 K (900 °C)-compressed samples were partitioned using grain size and misorientation criteria to quantify DRX.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. S. Biswas, S. Sivaprasad, N. Narasaiah, S. Tarafder, and P. C. Chakraborti, Int. J. Fatigue, 2007, vol. 29, pp. 786-791.10.1016/j.ijfatigue.2006.06.003 ↗
2. S. Venugopal, S. L. Mannan, and P. Rodriguez, Model. Simul. Mater. Sci. Eng., 2002, vol. 10, pp. 253-265.10.1088/0965-0393/10/3/301 ↗
3. X. Fang, K. Zhang, H. Guo, W. Wang, and B. Zhou, Mater. Sci. Eng. A, 2008, vol. 487, pp. 7-13.10.1016/j.msea.2007.09.075 ↗
4. A. S. Taylor and P. D. Hodgson, Mater. Sci. Eng. A, 2011, vol. 528, 3310-3320.10.1016/j.msea.2010.12.093 ↗
5. R. W. Cahn and P. Haasen, Physical Metallurgy, 4th ed, North-Holland, Amsterdam, 1996, pp. 2740.
6. H. Beladi, P. Cizek, and P. D. Hodgson, Metall. Mater. Trans. A, 2009, vol. 40, pp. 1175-1189.10.1007/s11661-009-9799-z ↗
7. S. Mandal, A. K. Bhaduri, and V. Subramanya Sarma, Metall. Mater. Trans. A, 2011, vol. 42, pp. 1062-1072.10.1007/s11661-010-0517-7 ↗
8. R. P. Reed, Jom, 1989, vol. 41, pp. 16-21.10.1007/BF03220991 ↗
9. M. El Wahabi, J. M. Cabrera, and J. M. Prado, Mater. Sci. Eng. A, 2003, vol. 343, 116-125.10.1016/S0921-5093(02)00357-X ↗
10. L.G. Liljestrand, Scand. J. Metall., 1972, vol. 1, pp. 271-277.
11. M. Frommert and G. Gottstein, Mater. Sci. Eng. A, 2009, vol. 506, pp. 101-110.10.1016/j.msea.2008.11.035 ↗
12. S. K. Badjena, ISIJ Int., 2014, vol. 54, pp. 650.10.2355/isijinternational.54.650 ↗
13. S. Venugopal, S. L. Mannan, and Y. V. R. K. Prasad, Mater Lett., 1992, vol. 15, pp. 79-83.10.1016/0167-577X(92)90016-D ↗
14. H. J. McQueen, N. Jin, and N. Ryan, Mater. Sci. Eng. A, 1995, vol. 190, pp. 43-53.10.1016/0921-5093(94)09599-R ↗
15. W. Roberts and B. Ahlblom, Acta Metall., 1978, vol. 26, pp. 801-813.10.1016/0001-6160(78)90030-5 ↗
16. D. Ponge and G. Gottstein, Acta Mater., 1998, vol. 46, pp. 69-80.10.1016/S1359-6454(97)00233-4 ↗
17. S. E. Ion, F. J. Humphreys, and S. H. White, Acta Metall., 1982, vol. 30, pp. 1909-1919.10.1016/0001-6160(82)90031-1 ↗
18. X. Wang, E. Brünger, and G. Gottstein, Scr. Mater., 2002, vol. 46, pp. 875-880.10.1016/S1359-6462(02)00072-6 ↗
19. A. Belyakov, T. Sakai, H. Miura, R. Kaibyshev, and K. Tsuzaki, Acta Mater., 2002, vol. 50, pp. 1547-1557.10.1016/S1359-6454(02)00013-7 ↗
20. S.-I. Kim and Y.-C. Yoo, Mater. Sci. Eng. A, 2011, vol. 311, pp. 108-113.10.1016/S0921-5093(01)00917-0 ↗
21. S. Solhjoo, Mater. Des., 2010, vol. 31, pp. 1360-1364.10.1016/j.matdes.2009.09.001 ↗
22. A. Dehghan-Manshadi, M. R. Barnett, and P. D. Hodgson, Mater. Sci. Eng. A, 2008, vol. 485, pp. 664-672.10.1016/j.msea.2007.08.026 ↗
23. A. Beylakov, S. Zherebstov, M. T. Khonova, and G. Salishchev, Mater. Phys. Mech., 2015, vol. 24, pp. 224-231.
24. Z. Yanushkevich, A. Belyakov, and R. Kaibyshev, Acta Mater., 2015, vol. 82, pp. 244-254.10.1016/j.actamat.2014.09.023 ↗
25. R. Ebrahimi, S. H. Zahiri, and A. Najafizadeh, J. Mater. Process. Technol., 2006, vol. 171, pp. 301-305.10.1016/j.jmatprotec.2005.06.072 ↗
26. D. Xu, M. Zhu, Z. Tang, and C. Sun, J. Wuhan Univ. Technol. Mater. Sci. Ed., 2013, vol. 28, pp. 819-24.10.1007/s11595-013-0775-5 ↗
27. M. R. G. Ferdowsi, D. Nakhaie, P. H. Benhangi, and G. R. Ebrahimi, J. Mater. Eng. Perform., 2014, vol. 23, pp. 1077-1087.10.1007/s11665-013-0815-5 ↗
28. Z. Akbari, H. Mirzadeh, and J.M. Cabrera, Mater. Des., 2015, vol. 77, pp. 126-131.10.1016/j.matdes.2015.04.005 ↗
29. M. El Wahabi, L. Gavard, J. M. Cabrera, J. M. Prado, and F. Montheillet, Mater. Sci. Eng. A, 2005, vol. 393, pp. 83-90.10.1016/j.msea.2004.09.064 ↗
30. D. Raabe, Journal of Materials Science, 1995, vol. 30, pp. 47-52.10.1007/BF00352130 ↗
31. E. I. Poliak and J. J. Jonas, Acta Mater., 1996, vol. 44, pp. 127-136.10.1016/1359-6454(95)00146-7 ↗
32. H. Mirzadeh and A. Najafizadeh, Mater. Des., 2010, vol. 31, pp. 1174-1179.10.1016/j.matdes.2009.09.038 ↗
33. A. Najafizadeh and J. J. Jonas, ISIJ Int., 2006, vol. 46, pp. 1679-1684.10.2355/isijinternational.46.1679 ↗
34. H. J. McQueen and N. D. Ryan, Mater. Sci. Eng. A, 2002, vol. 322, pp. 43-63.10.1016/S0921-5093(01)01117-0 ↗
35. H. Mirzadeh, M. H. Parsa, and D. Ohadi, Mater. Sci. Eng. A, 2013, vol. 569, pp. 54-60.10.1016/j.msea.2013.01.050 ↗
36. A. Dehghan-Manshadi and P. Hodgson, Metall. Mater. Trans. A, 2008, vol. 39, pp. 2830-2840.10.1007/s11661-008-9656-5 ↗
37. A. Dehghan-Manshadi, M. R. Barnett, and P. D. Hodgson, Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1359-1370.10.1007/s11661-008-9512-7 ↗
38. A. J. J. Schwartz, M. Kumar, B. L. L. Adams, and D. P. P. Field, Electron Backscatter Diffraction in Materials Science, 2nd ed., Springer, New York, 2009, pp. 403.10.1007/978-0-387-88136-2 ↗
39. H. Mirzadeh, J. M. Cabrera, A. Najafizadeh, and P. R. Calvillo, Mater. Sci. Eng. A, 2012, vol. 538, pp. 236-245.10.1016/j.msea.2012.01.037 ↗
40. F. J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Ltd, Oxford, UK, 2004, pp 574.
41. H. Sun, Y. Sun, R. Zhang, M. Wang, R. Tang, and Z. Zhou, Mater. Des., 2014, vol. 64, pp. 374-380.10.1016/j.matdes.2014.08.001 ↗
42. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J. J. Jonas, Prog. Mater. Sci., 2014, vol. 60, pp. 130-207.10.1016/j.pmatsci.2013.09.002 ↗
43. S. Biswas, D.S. Singh, B. Beausir, L.S. Toth and S. Suwas, Metal Mater Trans A, 2015, vol. 46, pp. 2598–2613.10.1007/s11661-015-2846-z ↗
44. S. Biswas, Dong-Ik Kim and S. Suwas, Mater Sc Engg A, 2012, vol. 550, pp. 19-30.10.1016/j.msea.2012.03.099 ↗
45. S. Biswas, B. Beausir, L.S. Tόth and S. Suwas, Acta Mater. 2013, vol. 61, 14, pp. 5236-5277.10.1016/j.actamat.2013.05.018 ↗