Spheroidization by Plasma Processing and Characterization of Stainless Steel Powder for 3D Printing
Source abstract
Abstract
Stainless steel 316L (SS 316L) powder was spheroidized by plasma processing to improve its suitability for powder 3D printing. The obtained spheroidized (sphero) powder was characterized in terms of its crystalline phases, elemental composition, morphology, particle size and distribution, light absorption, and flow properties. The elemental composition of the sphero powder met the Chinese standard for SS 316L except for its Si content. The volume fraction of ferrite increased after plasma processing. Furthermore, plasma processing was shown to not only reduce the mean size of the particles in the size range of 10 to 100 μm but also generate particles in the size range of 0.1 to 10 μm. The smaller particles filled the voids among larger particles, increasing the powder density. The light absorption was also increased owing to enhanced internal reflection. Although the basic flow energy decreased after plasma processing, the flow function (FF) value was smaller for the sphero powder, indicating a lower flowability of the sphero powder. However, the density of SS 316L pieces printed with commercial and sphero powders was 98.76 pct and 98.16 pct of the SS 316L bulk density, respectively, indicating the suitability of the sphero powder for 3D printing despite an FF below 10.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. I. Gibson, D. Rosen and B. Stucker: Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, Springer Science + Business Media, New York, NY, 2010, 1-11.10.1007/978-1-4419-1120-9 ↗
2. J. Manyika, J. Sinclair, R. Dobbs, G. Strube, L. Rassey, J. Mischke, J. Remes, C. Roxburgh, K. George, D. O’Halloran and S. RamPaswamy: Report, McKinsey Global Institute, November 2012.
3. N. Jones: Nature, 2012, vol. 487, pp. 22–23.10.1038/487022a ↗
4. J. Bird: Exploring the 3D printing opportunity, Financial Times, New York, 2014.
5. E. Herderick: JOM, 2015, vol. 67, pp. 580-581.10.1007/s11837-015-1323-x ↗
6. J. Slotwinski, E. Garboczi, P. Stutzman, C. Ferraris, S. Watson and M. Peltz: J Res Natl Inst Stand Technol, 2014, vol. 119, pp. 460-493.10.6028/jres.119.018 ↗
7. Q. Ma: JOM, 2015, vol. 67, pp. 536-537.10.1007/s11837-015-1321-z ↗
8. J. Slotwinski and E. Garboczi: JOM, 2015, vol. 67, pp. 538-543.10.1007/s11837-014-1290-7 ↗
9. J. Clayton, D. Millington-Smith and B. Armstrong: JOM, 2015, vol. 67, pp. 544-548.10.1007/s11837-015-1293-z ↗
10. A. Strondl, O. Lyckfeldt, H. Brodin and U. Ackelid: JOM, 2015, vol. 67, pp. 549-554.10.1007/s11837-015-1304-0 ↗
11. ASTM F3049-14, Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes, 2014.
12. T. Plookphol, S. Wisutmethangoon and S. Gonsrang: Powder Technol., 2011, vol. 214, pp. 506-512.10.1016/j.powtec.2011.09.015 ↗
13. L. Zhang, X. Chen, D. Li, C. Chen, X. Qu, X. He and Z. Li: Powder Technol., 2015, vol. 286, pp. 798-806.10.1016/j.powtec.2015.09.023 ↗
14. S. Özbilen: Powder Technol., 1999, vol. 102, pp. 109-119.10.1016/S0032-5910(98)00200-9 ↗
15. E. Bourdin, P. Fauchais and M. Boulos: Int J Heat Mass Tran, 1983, vol. 26, pp. 567-82.10.1016/0017-9310(83)90008-X ↗
16. N. Dignard and M.I. Boulos: ISPC, 1997, vol.13, pp. 1031.
17. X. Liu, K. Wang, P. Hu and Q. Chen: Rare Metal Mat. Eng., 2016, vol. 45, pp. 1325-1329.
18. J. Wang, J. Hao, Z. Guo and Y. Wang: Rare Metals, 2015, vol. 34, pp. 431-435.10.1007/s12598-014-0293-4 ↗
19. Z. Karoly and J. Szepvolgyi: Chem. ENG. Process., 2005, vol. 44, pp. 221-224.10.1016/j.cep.2004.02.015 ↗
20. M Rombouts, JP Kruth, L Froyen, P Mercelis (2006) CIRP Ann—Manuf Technol 55:187-192.10.1016/S0007-8506(07)60395-3 ↗
21. R. Freeman, Powder Technol., 2007, vol. 174, pp. 25-33.10.1016/j.powtec.2006.10.016 ↗
22. A.L. Schaeffler: Met. Prog., 1949, vol. 56, pp. 680–680B.
23. T. Takalo, N. Suutala, T. Moisio: Metall. Trans. A, 1979, vol. 10, pp. 1173–1181.10.1007/BF02811663 ↗
24. H. Kotan: Mater. Sci. Eng. A, 2015, vol. 647, pp. 136–143.10.1016/j.msea.2015.09.011 ↗
25. B. Fultz and J. Hove: Transmission Electron Microscopy and Diffractometry of Materials, Springer, Berlin, 2008.
26. S. Özbilen, Powder Metall., 1999, vol. 42, pp. 70-78.10.1179/pom.1999.42.1.70 ↗
27. G. Rai, E. Lavernia and N. Grant: JOM, 1985, vol. 37, pp. 17–29.10.1007/BF03257674 ↗
28. C. Boley, S. Khairallah and A. Rubenchik, Appl. Optics, 2015, vol. 54, pp. 2477-82.10.1364/AO.54.002477 ↗
29. M. Leturia, M. Benali, S. Lagarde, I. Ronga and K. Saleh: Powder Technol., 2014, vol. 253, pp. 406-423.10.1016/j.powtec.2013.11.045 ↗
30. ASTM Standards, D6773-02 and D6128-00 on shear testing.