journal article·2016-06

Microstructure and Mechanical Properties of Heat-Treated Co-20Cr-15W-10Ni Alloy for Biomedical Application

Kosuke Ueki, Kyosuke Ueda, Takayuki Narushima

Publisher page

Abstract

The microstructure and mechanical properties of a heat-treated biomedical ASTM F90 Co-20Cr-15W-10Ni (mass pct) alloy were investigated. The alloy was heat-treated at temperatures of 673 K to 1623 K (400 °C to 1450 °C) for holding times of 0.6 to 259.2 ks. The formation of M23X6-type (M: metallic element and X: C and N) and η-phase (M6X-M12X type) precipitates was detected in the heat-treated alloys using a combination of electrolytic extraction and X-ray diffraction. The formation of precipitates deteriorated the ductility of the heat-treated alloys. On the other hand, both the tensile strength and elongation were improved by heat treatment at low temperatures of 673 K to 873 K (400 °C to 600 °C). In this heat-treated alloy, the density of stacking faults was higher than that of the as-received alloy, and the formation of the e-phase was detected.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. R. V. Marrey, R. Butgermeister, R. B. Grishaber and R. O. Ritchie: Biomaterials, 2006, vol. 27, pp. 1988–2000.10.1016/j.biomaterials.2005.10.012 ↗
2. J. Favre, Y. Koizumi, A. Chiba, D. Fabregue and E. Maire: Meta// Mater. Trans. A, 2013, vol. 44, pp. 2819–2830.10.1007/s11661-012-1602-x ↗
3. P. Poncin and J. Proft: Proc. Mater. Process. Med. Devices Conf., 2003. pp. 253–59.
4. F.R. Morral: J. Mater., 1966, vol. 1, pp. 384–412.
5. R. K. Gupta, M. K. Karthikeyan, D. N. Bhalia, B. R. Ghosh and P. P. Sinha: Met. Sci. heat treat., 2008, vol. 50, pp. 175–178.10.1007/s11041-008-9031-6 ↗
6. J. Teague, E. Cerreta and M. Stout: Meta//, Mater. Trans. A, 2004, vol. 35, pp. 2767–2781.10.1007/s11661-004-0223-4 ↗
7. N. Yukawa and K. Sato: Mater. Trans. JIM, 1968, vol. 9, pp. 680–686.
8. M. Tanaka and H. Iizuka: Meta//. Mater. Trans. A, 1992, vol. 23, pp. 609–616.10.1007/BF02801178 ↗
9. P. Poncin, B. Gruez, P. Missillier, and P. Comte-Gaz: Proc. Mater. Process. Med. Devices Conf., 2006. pp. 85–90.
10. P. Poncin, C. Millet, and J. Chevy: Proc. Mater. Process. Med. Devices Conf., 2004. pp. 279–83.
11. K. Ueki, K. Ueda and T. Narushima: Key. Eng. Mater., 2014, vol. 616, pp. 258-262.10.4028/www.scientific.net/KEM.616.258 ↗
12. S. Mineta, S. Namba, T. Yoneda, K. Ueda and T. Narushima: Meta//, Mater. Trans. A, 2010, vol. 41, pp. 2129–2138.10.1007/s11661-010-0227-1 ↗
13. S. Mineta, Alfirano, S. Namba, T. Yoneda, K. Ueda, and T. Narushima: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 494–503.10.1007/s11661-012-1399-7 ↗
14. S. Mineta, Alfirano S. Namba, T. Yoneda, K. Ueda and T. Narushima: Meta//, Mater. Trans. A, 2012, vol. 43, pp. 3351–3358.10.1007/s11661-012-1142-4 ↗
15. F. Kurosawa, I. Taguchi and R. Matsumoto: J. Japan Inst. Metals, 1976, vol. 40, pp. 834–838.10.2320/jinstmet1952.40.8_834 ↗
16. A.J.T. Clemow and B.L. Daniell: J. Biomed. Mater. Res., 1979, vol. 13, pp. 265–279.10.1002/jbm.820130208 ↗
17. Alfirano, S. Mineta, S. Namba, T. Yoneda, K. Ueda and T. Narushima: Meta//, Mater. Trans. A, 2011, vol. 42, pp. 1941–1949.10.1007/s11661-011-0604-4 ↗
18. Alfirano, S. Mineta, S. Namba, T. Yoneda, K. Ueda and T. Narushima: Meta//, Mater. Trans. A, 2012, vol. 43, pp. 2125–2132.10.1007/s11661-011-1009-0 ↗
19. E. Bettini, T. Eriksson, M. Boström, C. Leygraf and J. Pan: Electrochim. Acta, 2011, vol. 56, pp. 9413–9419.10.1016/j.electacta.2011.08.028 ↗
20. T. Narushima, S. Mineta, Y. Kurihara and K. Ueda: JOM, 2013, vol. 65(4), pp. 489–504.10.1007/s11837-013-0567-6 ↗
21. D. Sorensen, B. Q. Li, W. W. Gerberich and K. A. Mkhoyan: Acta Mater., 2014, vol. 63, pp. 63–72.10.1016/j.actamat.2013.10.005 ↗
22. M. Assefpour-Dezfuly and W. Bonfield: J. Mater. Sci., 1984, vol. 19, pp. 2815–2836.10.1007/BF01026957 ↗
23. L. Remy and A. Pineau: Mater. Sci. Eng., 1976, vol. 26, pp. 123-132.10.1016/0025-5416(76)90234-2 ↗
24. I. Tamura: Met. Sci., 1982, vol. 16, pp. 245–253.10.1179/030634582790427316 ↗
25. T. Maki, T. Furuhara, N. Tsuji, S. Morita, G. Miyamoto and A. Shibata: Tetsu-to-Hagane, 2014, vol. 100, pp.1062-1075.10.2355/tetsutohagane.100.1062 ↗
26. A. K. Srivastava, G. Jha, N. Gope and S.B. Singh: Mater. Charact. 2006, vol. 57, pp. 127-135.10.1016/j.matchar.2006.01.010 ↗