journal article·2008-11

Analysis of Severe Plastic Deformation by Large Strain Extrusion Machining

M. Sevier, H.T.Y. Yang, W. Moscoso, S. Chandrasekar

Publisher page

Abstract

Large strain extrusion machining (LSEM), a constrained chip formation process, is examined as a method of severe plastic deformation (SPD) at small deformation rates for production of ultra-fine-grained (UFG) materials. A finite element procedure is developed for prediction of deformation field parameters such as effective strain, strain rate, and their variation across the thickness of the chip for various cutting (extrusion) ratios. The cutting force (extrusion pressure) and hydrostatic pressures within the deformation zone are also analyzed. A consideration of the deformation occurring in chip formation suggests bounds on the extrusion ratios that can be realized. Implications of the results for production of bulk chip samples of controlled geometry and with an UFG microstructure are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev, I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45 (2), pp. 103–8910.1016/S0079-6425(99)00007-9 ↗
2. V.M. Segal, V.I. Reznikov, A.E. Drobyshevskiy, V. Kopylov: Russ. Metall., 1981, vol. 1, pp. 99–105
3. R.Z. Valiev, A.V. Korznikov, M.M. Mulyukov: Mater. Sci. Eng. A, 1993, vol. 168, pp. 141–4810.1016/0921-5093(93)90717-S ↗
4. T.L. Brown, S. Swaminathan, S. Chandrasekar, W.D. Compton, A.H. King, K.P. Trumble: J. Mater. Res., 2002, vol. 17, pp. 2484–8810.1557/JMR.2002.0362 ↗
5. M. Ravi Shankar, S. Chandrasekar, A.H. King, W.D. Compton: Acta Mater., 2005, vol. 53, pp. 4781–9310.1016/j.actamat.2005.07.006 ↗
6. C. Huang, T.G. Murthy, M.R. Shankar, R. M’Saoubi, S. Chandrasekar: Scripta Mater., 2008, vol. 58, pp. 663–6610.1016/j.scriptamat.2007.11.042 ↗
7. W. Moscoso, M. Ravi Shankar, J.B. Mann, W.D. Compton, S. Chandrasekar: J. Mater. Res., 2007, vol. 22 (1), pp. 201–0510.1557/jmr.2007.0021 ↗
8. L. De Chiffre: Int. J. Mach. Tool Des. Res., 1976, vol. 16, pp. 137–4410.1016/0020-7357(76)90032-9 ↗
9. B.E. Klamecki: Ph.D. Thesis, University of Illinois at Urbana–Champaign, Urbana, IL, 1973
10. T. Shirakashi and E. Usui: Proc. Int. Cong. Prod. Eng., Tokyo, 1974, pp. 535–40
11. J.S. Strenkowski, J.T. Carroll: J. Eng. Ind., 1985, vol. 107, pp. 349–5410.1115/1.3186008 ↗
12. K. Iwata, K. Oskada, Y. Terasaka: J. Eng. Mater. Technol., 1974, vol. 106, pp. 132–3810.1115/1.3225687 ↗
13. A.J.M. Shih, S. Chandrasekar, and H.T.Y. Yang: ASME Pub. PED, 1990, pp. 11–2410.1016/0956-716X(90)90485-Y ↗
14. K. Komvopoulos, S.A. Erpenbeck: J. Eng. Ind., 1991, vol. 113, pp. 253–6710.1115/1.2899695 ↗
15. Z.C. Lin, K.T. Chu, W.C. Pan: J. Mater. Process. Technol., 1994, vol. 41, pp. 291–31010.1016/0924-0136(94)90167-8 ↗
16. B. Zhang, A. Bagchi: J. Eng. Ind., vol. 116, 1994, pp. 289–9710.1115/1.2901944 ↗
17. M.C. Shaw: Metal Cutting Principles, Oxford University Press, Oxford, United Kingdom, 1984
18. I. Finnie: Mech. Eng., 1956, vol. 78, pp. 715–21
19. J.T. Carroll, J.S. Strenkowski: Int. J. Mech. Sci., 1988, vol. 30, pp. 899–2010.1016/0020-7403(88)90073-2 ↗
20. T.D. Marusich, M. Ortiz: Int. J. Num. Meth. Eng., 1995, vol. 38, pp. 3675–9410.1002/nme.1620382108 ↗
21. V. Madhavan, S. Chandrasekar, T.N. Farris: J. Appl. Mech., 2000, vol. 67, pp. 128–3910.1115/1.321157 ↗
22. M. Sevier, S. Lee, M.R. Shankar, H.T.Y. Yang, S. Chandrasekar, W.D. Compton: Mater. Sci. Forum, 2006, vols. 503–504, pp 379–8410.4028/www.scientific.net/MSF.503-504.379 ↗
23. L. Olovsson, L. Nilsson, K. Simonsson: Comp. Struct., 1999, vol. 72, pp. 497–50710.1016/S0045-7949(98)00332-0 ↗
24. M.R. Movahhedy, M.S. Gadala, Y. Altintas: Mach. Sci. Technol., 2000, vol. 4, pp. 15–4210.1080/10940340008945698 ↗
25. I.S. Jawahir, A.K. Balaji, R. Stevenson, and C.A. van Luttervelt: Symp. on Predictable Modeling in Metal Cutting as Means of Bridging Gap between Theory and Practice, J. Manuf. Sci. Eng., ASME IMECE, MED-6-2, 1997, pp. 3–1210.1115/IMECE1997-1129 ↗
26. C.A. van Luttervelt, T. Childs, I.S. Jawahir, F. Klocke: Ann. CIRP, 1998, vol. 47, pp. 587–62610.1016/S0007-8506(07)63244-2 ↗
27. D.J. Benson: Comp. Meth. Appl. Mech. Eng., 1989, vol. 72, pp. 305–5010.1016/0045-7825(89)90003-0 ↗
28. M. Kleiber: Incremental Finite Element Modeling in Non-Linear Solid Mechanics, John Wiley & Sons, New York, NY, 1989
29. ABAQUS, ABAQUS Theory Manual, Version 6.5, Hibbitt, Karlsson & Sorenson, Inc., Pawtucket, RI, 2004
30. I.C. Taig: “Structural Analysis by the Matrix Displacement Method,” English Electric Aviation Report S017, English Electric Aviation Ltd., England, 1961
31. B.M. Irons: J. AIAA, 1966, vol. 14, pp. 2035–3710.2514/3.3836 ↗
32. D.P. Flanagan, T. Belytschko: Int. J. Num. Meth. Eng., 1981, vol. 17, pp. 679–70610.1002/nme.1620170504 ↗
33. M. Sevier, H.T.Y. Yang, S. Lee, S. Chandrasekar: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 927–3810.1007/s11663-007-9103-9 ↗
34. S. Lee, J. Hwang, M. Ravi Shankar, S. Chandrasekar, W.D. Compton: Metall. Mater. Trans. A, 2006, vol. 37A, pp 1633–4310.1007/s11661-006-0105-z ↗
35. H.S. Kim: Mater. Sci. Eng. A, 2001, vol. 315, pp. 122–2810.1016/S0921-5093(01)01188-1 ↗
36. S.J. Oh, S.B. Kang: Mater. Sci. Eng. A, 2003, vol. 343, pp. 107–1510.1016/S0921-5093(02)00324-6 ↗