Morphological and Microstructural Characterization of the Aragonitic CaCO3/Mg,Al-Hydrotalcite Coating on Mg-9 Wt Pct Al-1 Wt Pct Zn Alloy to Protect against Corrosion
Source abstract
Abstract
This work presents a novel environmentally clean method for synthesizing the chemical conversion coating on Mg-Al-Zn (AZ91D) alloy surface and protecting the alloy from corrosion. An aragonitic CaCO3/Mg,Al-hydrotalcite two-layer coating was first developed on the Mg alloy in an aqueous Ca2+/HCO3 − solution at 50 °C. When the Mg sample was immersed in a Ca2+/HCO3 − aqueous solution, corrosion occurred on the Mg sample surface, resulting in a high interfacial Mg2+ concentration and high pH value directly above the sample surface. The layer (Mg,Al-hydrotalcite) generated by corrosion formed on the Mg alloy when initially immersed in the Ca2+/HCO3 − solution. Temperature, solution pH, and presence of Mg2+ are important factors when determining the production yield of aragonitic CaCO3 particles. In this work, the high interfacial Mg2+ concentration and high pH directly above the sample surface induced preferential growth of CaCO3 on the Mg,Al-hydrotalcite layer, thereby forming a two-layer coating on the Mg alloy sample. Electrochemical tests using the polarization impedance method and salt spray test show that the CaCO3 coating protected the substrate metal from corrosion. Moreover, the CaCO3 layer markedly improved the galvanic corrosion resistance of the coated Mg alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Layered Double Hydroxides Synthesis and Applications · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. D.A. Jones: Principles and Prevention of Corrosion, 2nd ed., Prentice Hall, Englewood Cliffs, NJ, 1996, pp. 40–74
2. G. Song, A. Atrens, D. St. John, X. Wu, J. Nairn: Corros. Sci., 1997, vol. 39, pp. 1981–200410.1016/S0010-938X(97)00090-5 ↗
3. G. Baril, N. Pébère: Corros. Sci., 2001, vol. 43, pp. 471–8410.1016/S0010-938X(00)00095-0 ↗
4. O. Lunder, J.H. Nordlien, K. Nisancioglu: Corros. Rev., 1997, vol. 15, pp. 439–6910.1515/CORRREV.1997.15.3-4.439 ↗
5. G. Song, A. Atrens, X. Wu, B. Zhang: Corros. Sci., 1998, vol. 40, pp. 1769–9110.1016/S0010-938X(98)00078-X ↗
6. G. Baril, C. Blanc, N. Pébère: J. Electrochem. Soc., 2001, vol. 148, pp. B489–B49610.1149/1.1415722 ↗
7. B.L. Yu, J.Y. Uan: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2245–5210.1007/s11661-005-0343-5 ↗
8. M. Avedesian, H. Baker: Magnesium and Magnesium Alloys, ASM Specialty Handbook, ASM, Materials Park, OH, 1999, pp. 1–71
9. A. Elbetieha, M.H. Al-Hamood: Toxicology, 1997, vol. 116, pp. 39–4710.1016/S0300-483X(96)03516-0 ↗
10. H. Huo, Y. Li, F. Wang: Corros. Sci., 2004, vol. 46, pp. 1467–7710.1016/j.corsci.2003.09.023 ↗
11. A.L. Rudd, C.B. Breslin, F. Mansfeld: Corros. Sci., 2000, vol. 42, pp. 275–8810.1016/S0010-938X(99)00076-1 ↗
12. K.Z. Chong, T.S. Shih: Mater. Chem. Phys., 2003, vol. 80, pp. 191–20010.1016/S0254-0584(02)00481-9 ↗
13. D. Hawke, D.L. Albright: Met. Finish., 1995, vol. 93 pp. 34–3810.1016/0026-0576(96)80428-4 ↗
14. C.S. Lin, S.K. Fang: J. Electrochem. Soc., 2005, vol. 152, pp. B54–B5910.1149/1.1845371 ↗
15. M.A. Gonzalez-Nunez, C.A. Nunez-Lopez, P. Skeldon, G.E. Thompson, H. Karimzadeh, P. Lyon, T.E. Wilks: Corros. Sci., 1995, vol. 37, pp. 1763–7210.1016/0010-938X(95)00078-X ↗
16. M.A. Gonzalez-Nunez, P. Skeldon, G.E. Thompson, H. Karimzadeh: Corrosion, 1999, vol. 55, pp. 1136–4310.5006/1.3283951 ↗
17. M. Dabala, K. Brunelli, E. Napolitani, M. Magrini: Surf. Coat. Technol., 2003, vol. 172, pp. 227–3210.1016/S0257-8972(03)00336-0 ↗
18. M.P. Schriever: Canadian Patent 2,056,159, 1990
19. Y. Zhang, C. Yan, F. Wang, H. Lou, C. Cao: Surf. Coat. Technol., 2002, vol. 161, pp. 36–4310.1016/S0257-8972(02)00342-0 ↗
20. J.K. Lin, C.L. Hsia, J.Y. Uan: Scripta Mater., 2007, vol. 56, pp. 927–3010.1016/j.scriptamat.2007.02.020 ↗
21. J.W. Morse, Q. Wang, M.Y. Tsio: Geology, 1997, vol. 25, pp. 85–8710.1130/0091-7613(1997)025<0085:IOTAMC>2.3.CO;2 ↗
22. M. Pourbaix: Atlas of Electrochemical Equilibria in Aqueous Solutions, National Association of Corrosion Engineers, Houston, TX, 1974, pp. 139–145
23. J.L. Bischoff, W.S. Fyfe: Am. J. Sci., 1968, vol. 266, pp. 65–7910.2475/ajs.266.2.65 ↗
24. M.M. Reddy, G.H. Nancollas: J. Cryst. Growth, 1976, vol. 35, pp. 33–3810.1016/0022-0248(76)90240-2 ↗
25. F.C. Meldrum, S.T. Hyde: J. Cryst. Growth, 2001, vol. 231, pp. 544–5810.1016/S0022-0248(01)01519-6 ↗
26. M. Kitamura: J. Coll. Interface Sci., 2001, vol. 236, pp. 318–2710.1006/jcis.2000.7398 ↗
27. C. Gabrielli, R. Jaouhari, S. Joiret, G. Maurin, P. Rousseau: J. Electrochem. Soc., 2003, vol. 150, pp. C478–C48410.1149/1.1579482 ↗
28. M. Euvrard, F. Membrey, C. Filiatre, C. Pignolet, A. Foissy: J. Cryst. Growth, 2006, vol. 291, pp. 428–3510.1016/j.jcrysgro.2006.03.025 ↗
29. G. Salvago, G. Bollini: Corrosion, 1999, vol. 55, pp. 397–40510.5006/1.3284000 ↗
30. C.Y. Cho, J.Y. Uan, H.J. Lin: Mater. Sci. Eng. A, 2005, vol. 402, pp. 193–20210.1016/j.msea.2005.04.043 ↗
31. B.L. Yu, J.Y. Uan: Scripta Mater., 2006, vol. 54, pp. 1253–5710.1016/j.scriptamat.2005.12.031 ↗
32. R.H. Petrucci, W.S. Harwood, F.G. Herring: General Chemistry, 8th ed., Prentice-Hall Inc., Englewood Cliffs, NJ, 2002, pp. 872–905
33. StandardTest Method of Salt Spray Testing, ASTM B117, ASTM, Philadelphia, PA, 1990, pp. 20–26
34. M.R. Bothwell: in The Corrosion of Light Metals, H.P. Godard, ed., John Wiley & Sons, New York, NY, 1967, p. 257
35. G.L. Maker, J. Kruger: J. Electrochem. Soc., 1990, vol. 137, pp. 414–2110.1149/1.2086455 ↗
36. G.T. Zhou, Y.F. Zheng: Geochim. Cosmochim. Acta, 2003, vol. 67, pp, 387–9910.1016/S0016-7037(02)01140-7 ↗
37. G. Falini, S. Fermani, M. Gazzano, A. Ripamonti: J. Mater. Chem., 1998, vol. 8, pp. 1061–6510.1039/a707893e ↗
38. Y. Zhang, R.A. Dawe: Chem. Geol., 2000, vol. 163, pp. 129–3810.1016/S0009-2541(99)00097-2 ↗
39. M. Dietzel, N. Gussone, A. Eisenhauer: Chem. Geol., 2004, vol. 203, pp. 139–5110.1016/j.chemgeo.2003.09.008 ↗
40. A. Katz: Geochim. Cosmochim. Acta, 1973, vol. 37, pp. 1563–6810.1016/0016-7037(73)90091-4 ↗
41. O. Söhnel, J.W. Mullin: J. Cryst. Growth, 1982, vol. 60, pp. 239–5010.1016/0022-0248(82)90095-1 ↗
42. A. Mucci, J.W. Morse: Geochim. Cosmochim. Acta, 1983, vol. 47, pp. 217–3310.1016/0016-7037(83)90135-7 ↗
43. T.G. Sabbides, P.G. Koutsoukos: J. Cryst. Growth, 1993, vol. 133, pp. 13–2210.1016/0022-0248(93)90098-H ↗
44. C.Y. Tai, F.B. Chen: AIChE, 1998, vol. 44, pp. 1790–9810.1002/aic.690440810 ↗
45. M.M. Reddy, K.K. Wang: J. Cryst. Growth, 1980, vol. 50, pp. 470–8010.1016/0022-0248(80)90095-0 ↗
46. N. Wada, K. Yamashita, T. Umegaki: J. Coll. Interface Sci., 1998, vol. 201, pp. 1–610.1006/jcis.1997.5336 ↗
47. F.M. Labajos, M.D. Sastre, R. Trujillano, V. Rives: J. Mater. Chem., 1999, vol. 9, pp. 1033–3910.1039/a808544g ↗
48. S.J. Bull: Tribol. Int., 1997, vol. 30, pp. 491–9810.1016/S0301-679X(97)00012-1 ↗
49. M. Zhao, S. Wu, J. Luo, Y. Fukuda, H. Nakae: Surf. Coat. Technol., 2006, vol. 200, pp. 5407–1210.1016/j.surfcoat.2005.07.064 ↗