journal article·2004-03

Temperature evolution and life prediction in fatigue of superalloys

L. Jiang, H. Wang, P. K. Liaw, C. R. Brooks, L. Chen, D. L. Klarstrom

Publisher page

Abstract

Low-cycle fatigue behavior of two superalloys, ULTIMET® alloy, Co-26 pct Cr-9 pct Ni (wt pct), and HAYNES® HR-120® alloy, Ni-33 pct Fe-25 pct Cr, was studied at room temperature. An infrared thermography system was employed to monitor the temperature evolution of fatigue processes for both superalloys. Temperature changes during fatigue were related to the hysteresis effect, and were successfully predicted, based on the consideration of the hysteresis effect and heat conduction. The temperature increase of a specimen from the initial to the equilibrium stages was used as an index to predict the fatigue life of the two superalloys. It was found that the fatigue-life predictions using the present model were in good agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermography and Photoacoustic Techniques · High Temperature Alloys and Creep · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, Cambridge, United Kingdom, 1998.10.1017/CBO9780511806575 ↗
2. A. Puskar and S.A. Golovin: Fatigue in Materials: Cumulative Damage Processes, Elsevier Science Publishers, New York, NY, 1985.
3. G.R. Halford: Ph.D. Thesis, University of Illinois, Urbana, IL, 1966.
4. P.K. Liaw and M.E. Fine: Metall. Trans. A, 1981, vol. 12A, pp. 48–55.
5. M.E. Fine and D.L. Davidson: in Fatigue Mechanisms, Advances in Quantitative Measurement of Physical Damage, ASTM STP 811, J. Lankford, D.L. Davidson, W.L. Morris, and R.P. Wei, eds., ASTM, Philadelphia, PA, 1983, pp. 350–70.10.1520/STP30564S ↗
6. D.L. Klarstrom: J. Mater. Eng. Performance, 1993, no. 2, pp. 523–30.10.1007/BF02661736 ↗
7. P. Crook and D.L. Klarstrom: ADVMAT’ 91, San Diego, CA, June 1991.
8. P. Crook and A.V. Levy: Metals Handbook, ASM, Materials Park, OH, 1992, vol. 18, pp. 766–71.
9. A.V. Levy and P. Crook: Wear, 1991, vol. 151, pp. 337–50.10.1016/0043-1648(91)90260-2 ↗
10. H.M. Tawancy, V.R. Ishwar, and B.E. Lewis: J. Mater. Sci. Lett., 1986, vol. 5, pp. 337–41.10.1007/BF01748098 ↗
11. ULTIMET® Alloy, Haynes International, Kokomo, IN, 1994, p. 3.
12. Y.H. He, L.J. Chen, P.K. Liaw, R.L. McDaniels, C.R. Brooks, R.R. Seeley, and D.L. Klarstrom: Int. J. Fatigue, 2000, vol. 24, pp. 931–42.10.1016/S0142-1123(02)00009-9 ↗
13. H. Wang, L. Jiang, Y. He, L.J. Chen, P.K. Liaw, R.R. Seeley, and D.R. Klarstrom: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1287–92.10.1007/s11661-002-0231-1 ↗
14. J. Morrow: Internal Friction, Damping, and Cyclic Plasticity, ASTM STP 378, ASTM, Philadelphia, PA, 1965, pp. 45–87.10.1520/STP43764S ↗
15. Y.W. Chung and W.J. Lee: Mater. Sci. Eng. A, 1994, vol. 186, pp. 121–28.10.1016/0921-5093(94)90310-7 ↗
16. G.R. Halford: “The Fatigue Toughness of Metals: A Data Compilation,” T. & A.M. Report No. 265, University of Illinois, Urbana, IL, 1964.
17. B. Yang, P.K. Liaw, H. Wang, L. Jiang, J.Y. Huang, R.C. Kuo, and J.G. Huang: Materials Science and Engineering, A314, 2001, pp. 131–139.10.1016/S0921-5093(00)01910-9 ↗
18. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Metall. Mater. Trans. A, 32 (9), 2001, pp. 2279–2296.10.1007/s11661-001-0203-x ↗
19. H. Wang, L. Jiang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Metall. Mater. Trans. A, 31, 2000, pp. 1307–1310.10.1007/s11661-000-0126-y ↗
20. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Transaction of Nonferrous Metals Society of China, Vol. 12, 2002, pp. 734–747.
21. P.K. Liaw, B. Yang, H. Tian, L. Jiang, H. Wang, J.Y. Huang, R.C. Kuo, J.G. Huang, D. Fielden, J.P. Strizak, and L.K. Mansur: Fatigue and Fracture Mechanics: 33rd Volume, ASTM STP 1417, W.G. Reuter and R.S. Piascik, Eds., ASTM International, West Conshohocken, PA, 2002, pp. 524–556.
22. P.K. Liaw, H. Wang, L. Jiang, B. Yang, J.Y. Huang, R.C. Kuo, and J.G. Huang: Scripta Mater., 42, 2000, pp. 389–395.10.1016/S1359-6462(99)00358-9 ↗
23. B. Yang, P.K. Liaw, G. Wang, W.H. Peter, R.A. Buchanan, Y. Yokoyama, J.Y. Huang, R.C. Kuo, J.G. Huang, D.E. Fielden, and D.L. Klarstrom: Metall. Mater. Trans. A, in press.
24. L.J. Chen, P.K. Liaw, H. Wang, Y.H. He, R.L. McDaniels, L. Jiang, B. Yang, and D.L. Klarstrom: Mechanics of Materials, 36, 2004, pp. 85–98.10.1016/S0167-6636(03)00033-4 ↗
25. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Mechanics of Materials, 36, 2004, pp. 73–84.10.1016/S0167-6636(03)00032-2 ↗
26. B. Yang: Journal of Materials Engineering and Performance, 12 (3), 2003, pp. 345–353.10.1361/105994903770343213 ↗
27. M.D. Mikhailov and M.N. Özisik: Unified Analysis and Solutions of Heat and Mass Diffusion, John Wiley & Sons, New York, NY, 1984.