Decomposition of ferrite in commercial superduplex stainless steel weld metals; microstructural transformations above 700 °C
Source abstract
Abstract
The microstructural stability at temperatures above 700 °C of weld metal of type 29Cr-8Ni-2Mo-0.39N and weld metal of type 25Cr-10Ni-4Mo-0.28N has been compared. Multipass welding was employed using the gas tungsten arc welding technique with a shielding gas of Ar+2 pct N2. The quantitative assessment of the intermetallic phase was performed using automatic image analysis in the light optical microscope (LOM). Detailed microanalysis was also performed using scanning and transmission electron microscopy. A computer program developed by the authors was used to calculate a continuous cooling-temperature (CCT) diagram on the basis of the experimentally determined time-temperature-transformation (TTT) diagram. Thermodynamic calculations for estimating phase stabilities and for interpreting experimental observations were performed. It was found that weld metal of type 29Cr-8Ni-2Mo-0.39N was microstructurally more stable than weld metal of type 25Cr-10Ni-4Mo-0.28N. A lower molybdenum concentration and a higher nitrogen concentration in the former alloy could explain the higher stability with respect to the intermetallic phase. The higher nitrogen concentration also provides a rationale for the higher stability against the formation of secondary austenite in weld metal of type 29Cr-8Ni-2Mo-0.39N. This effect, which is associated with a lower thermodynamic driving force for precipitation of secondary austenite during multipass welding, can be explained by nitrogen-enhanced primary austenite formation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. G. Herbsleb: Werkst. Korros., 1982, vol. 33, pp. 334–40.10.1002/maco.19820330603 ↗
2. E. Folkhard: Welding Metallurgy of Stainless Steels, 1st ed., Springer-Verlag, Wien, 1988.10.1007/978-3-7091-8965-8 ↗
3. D.J. Kotecki and T.A. Siewert: Welding J., 1992, vol. 71, pp. 171–78.
4. S. Eriksson: Jernkontorets Ann., 1934, vol. 118, pp. 530–42.
5. E.O. Hall and S.H. Algie: Metall Rev., 1966, vol. 11, pp. 61–88.10.1179/imr.1966.11.1.61 ↗
6. J.S. Kasper: Acta Metall., 1954, vol. 2, pp. 456–61.10.1016/0001-6160(54)90066-8 ↗
7. D.A. Evans and K.H. Jack: Acta Crystallogr., 1957, vol. 10, pp. 769–70.10.1107/S0365110X57001279 ↗
8. S. Rideout, W.D. Manley, E.L. Kamen, B.S. Lement, and P.A. Beck: Trans. AIME, 1951, vol. 191, p. 872.
9. J.-O. Nilsson: Mater. Sci. Technol., 1992, vol. 8, pp. 685–700.10.1179/mst.1992.8.8.685 ↗
10. J.-O. Nilsson, L. Karlsson, and J.-O. Andersson: Mater. Sci. Technol., 1995, vol. 11, pp. 276–83.10.1179/mst.1995.11.3.276 ↗
11. R. Gunn: Duplex Stainless Steels, 1st ed., Woodhead Publishing, Cambridge, United Kingdom, 1997, pp. 14–49.10.1533/9781845698775 ↗
12. E. Beraha and B. Shpigler: Color Metallography, 1st ed., ASM, Metals Park, OH, 1977.
13. O. Hedebrant: Jernkontorets Ann., 1954, vol. 138, pp. 643–54.
14. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103–12.10.1063/1.1750380 ↗
15. M. Avrami: J. Chem. Phys., 1940, vol. 8, pp. 212–24.10.1063/1.1750631 ↗
16. M. Avrami: J. Chem. Phys., 1941, vol. 9, pp. 177–84.10.1063/1.1750872 ↗
17. E. Scheil: Arch. Eisenhüttenwesn., 1935, vol. 8, pp. 565–67.10.1002/srin.193500186 ↗
18. A. Gregori, J.-O. Nilsson, and F. Bonollo: Mater. Sci. Forum, 1999, vols. 318–320, pp. 829–34.10.4028/www.scientific.net/MSF.318-320.829 ↗
19. A. Wilson and J.-O. Nilsson: Scand. J. Metall., 1996, vol. 25, pp. 178–84.
20. B. Sundman, B. Jansson, and J.-O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
21. B. Sundman: TCFE99 Thermodynamic Database for Steel, Thermo-Calc Software, Stockholm, 1999.
22. E. Scheil: Z. Metallk., 1942, vol. 70, p. 70.
23. J.-O. Anderson, B. Jansson, and J.-O. Andersson: Fundamentals and Application of Ternary Diffusion, 1st ed., Pergamon Press, New York, NY, 1990, p. 153.10.1016/B978-0-08-040412-7.50023-2 ↗
24. J.-O. Nilsson, P. Kangas, T. Karlsson, and A. Wilson: Metall. Mater. Trans A, 2000, vol. 31A, pp. 35–45.10.1007/s11661-000-0050-1 ↗
25. S. Hertzman: Metall. Trans. A, 1987, vol. 18A, pp. 1767–78.10.1007/BF02646208 ↗
26. J.-O. Nilsson, T. Huhtala, P. Jonsson, L. Karlsson, and A. Wilson: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2196–2208.10.1007/BF02651874 ↗
27. S. Hertzman, T. Huhtala, L. Karlsson, J.-O. Nilsson, M. Nilsson, R. Jargelius-Pettersson, and A. Wilson: Mater. Sci. Technol., 1997, vol. 13, pp. 604–13.10.1179/mst.1997.13.7.604 ↗