The development of protective borosilicate layers on a Mo-3Si-1B (weight percent) alloy
Source abstract
Abstract
Molybdenum-based alloys with the addition of small amounts of silicon (2 to 4.5 wt pct) and boron (∼1 wt pct) can form a passivating layer that protects the alloy from further rapid oxidation. When such molybdenum-based alloys are exposed to oxidizing environments at high temperatures, a borosilicate glass layer can form that will reduce the transport of oxygen to the alloy to limit further oxidation. Oxidation is then controlled by diffusion through the borosilicate glass layer. The focus of this research was to study the development of the borosilicate layer on a Mo-3Si-1B (wt pct) alloy. The oxidation of this alloy was studied in a variety of gas environments over a range of temperatures in order to elucidate the critical factors that allow it to develop a protective borosilicate glass layer. The borosilicate glass layer is protective when no continuous channels exist in the layer extending from the gas interface to the alloy interface. The borosilicate layer is believed to contain channels in the early stages of development, and the elimination of the channels is obtained by appropriate control of the temperature and gas-flow conditions, whereby MoO3 is removed via vaporization while the borosilicate viscosity is not increased due to loss of B2O3. Once the borosilicate layer is continuous and free of channels, subsequent oxidation occurs by inward diffusion of oxygen and outward diffusion of molybdenum through this layer, with vaporization of MoO3 occurring at the gas/borosilicate-layer interface and MoO2 and additional borosilicate forming at the alloy/MoO2 interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. M.K. Meyer and M. Akinc: J. Am. Ceram. Soc., 1996, vol. 79, pp. 938–45.10.1111/j.1151-2916.1996.tb08528.x ↗
2. M.K. Meyer, A.J. Thom, and M. Akinc: Intermetallics, 1999, vol. 7, pp. 153–62.10.1016/S0966-9795(98)00058-2 ↗
3. T.A. Parthasarathy, M.G. Mendiratta, and D.M. Dimiduk: Acta Mater., 2002, vol. 50, pp. 1857–68.10.1016/S1359-6454(02)00039-3 ↗
4. J.S. Park, R. Sakidja, and J.H. Perepezko: Scripta Mater., 2002, vol. 6, pp. 765–70.10.1016/S1359-6462(02)00070-2 ↗
5. V. Supatarawanich, D.R. Johnson, and C.T. Liu: Intermetallics, 2004, vol. 12, pp. 721–25.10.1016/j.intermet.2004.02.011 ↗
6. K. Yashimi, S. Nakatani, T. Suda, S. Hanada, and H. Habazaki: Intermetallics, 2002, vol. 10, pp. 407–14.10.1016/S0966-9795(02)00013-4 ↗
7. A.J. Thom, E. Summers, and M. Akinc: Intermetallics, 2002, vol. 10, pp. 555–70.10.1016/S0966-9795(02)00034-1 ↗
8. N. Nomura, T. Suzuki, K. Yishimi, and S. Hanada: Intermetallics, 2003, vol. 11, pp. 735–42.10.1016/S0966-9795(03)00069-4 ↗
9. K. Ito, T. Murokami, K. Adachi, and M. Yamaguchi: Intermetallics, 2003, vol. 11, pp. 763–72.10.1016/S0966-9795(03)00074-8 ↗
10. K. Yoshimi, S. Nakatani, N. Nomura, and S. Hanada: Intermetallics, 2003, vol. 11, pp. 787–94.10.1016/S0966-9795(03)00073-6 ↗
11. X. Fan, K. Hack, and T. Ishigaki: Mater. Sci. Eng., 2000, vol. A278, pp. 46–53.10.1016/S0921-5093(99)00593-6 ↗
12. J.H. Schneibel, M.J. Kramer, and D.S. Easton: Scripta Mater., 2002, vol. 46, pp. 217–21.10.1016/S1359-6462(01)01227-1 ↗
13. J.H. Schneibel, C.T. Liu, D.S. Easton, and C.A. Carmichael: Mater. Sci. Eng., 1999, vol. A261, pp. 78–83.10.1016/S0921-5093(98)01051-X ↗
14. M. Akinc, M.K. Meyer, M.J. Kramer, A.J. Thom, J.J. Huebsch, and B. Cook: Mater. Sci. Eng., 1999, vol. A261, pp. 16–23.10.1016/S0921-5093(98)01045-4 ↗
15. D.M. Berczik: U.S. Patent No. 5,595,616, Jan. 21, 1997.
16. J.H. Perepezko, R. Sakidja, S. Kim, Z. Dong, and J.S. Park: Structural Intermetallics 2001, TMS, Warrendale, PA, 2001, pp. 505–14.
17. R. Sakidja, H. Sieber, and J.H. Perepezko: Molybdenum and Molybdenum Alloys, TMS, Warrendale, PA, 1998, pp. 99–110.
18. N.P. Bansal and R.H. Doremus: Handbook of Glass Properties, Academic Press Inc., New York, NY, 1986, p. 243.
19. T.J. Rockett and W.R. Foster: J. Am. Ceramic Soc., 1965, vol. 48, p. 78.
20. G.T. Bayer: Master’s Thesis, University of Pittsburgh, Pittsburgh, PA, 1992.
21. W.J. Quadakkers, A. Elschner, H. Holsbrecher, K. Schmidt, W. Speier, and H. Nickel: Mikrochimika Acta, 1992, vol. 107, pp. 197–213.10.1007/BF01244473 ↗