journal article·2009-06

Comparison of Crevice Corrosion of Fe-Based Amorphous Metal and Crystalline Ni-Cr-Mo Alloy

X. Shan, H. Ha, J.H. Payer

Publisher page

Abstract

The crevice corrosion behaviors of an Fe-based bulk metallic glass alloy (SAM1651) and a Ni-Cr-Mo crystalline alloy (C-22) were studied in 4M NaCl solution at 100 °C with cyclic potentiodynamic polarization and constant-potential tests. The corrosion damage morphologies, corrosion products, and the compositions of corroded surfaces of these two alloys were studied with optical three-dimensional reconstruction, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and Auger electron spectroscopy (AES). It was found that the Fe-based bulk metallic glass (amorphous alloy) SAM1651 had a more positive breakdown potential and repassivation potential than crystalline alloy C-22 in cyclic potentiodynamic polarization tests and required a more positive oxidizing potential to initiate crevice corrosion in constant-potential tests. Once crevice corrosion initiated, the corrosion propagation of C-22 was more localized near the crevice border compared to SAM1651, and SAM1651 repassivated more readily than C-22. The EDS results indicated that the corrosion products of both alloys contained a high amount of O and were enriched in Mo and Cr. The AES results indicated that a Cr-rich oxide passive film was formed on the surfaces of both alloys, and both alloys corroded congruently in the crevice corrosion damage areas.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Nanoporous metals and alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. A. Inoue: Acta Mater., 2000, vol. 48, pp. 279–30610.1016/S1359-6454(99)00300-6 ↗
2. A. Inoue, B. Shen, and A. Takeuchi: Mater. Sci. Forum, 2007, vols. 539–543, pp. 92–9910.4028/www.scientific.net/MSF.539-543.92 ↗
3. V. Ponnambalam, S.J. Poon, and G.J. Shiflet: J. Mater. Res., 2004, vol. 19, pp. 1320–2310.1557/JMR.2004.0176 ↗
4. V. Ponnambalam, S.J. Poon, and G.J. Shiflet: J. Mater. Res., 2004, vol. 19, pp. 3046–5210.1557/JMR.2004.0374 ↗
5. A. Inoue, B. Shen, and A. Takeuchi: Mater. Sci. Eng. A, 2006, vol. 441, pp. 18–2510.1016/j.msea.2006.02.416 ↗
6. J.R. Scully and A. Lucente: ASM Handbook, ASM International, Materials Park, OH, 2005, vol. 13B, pp. 476–89
7. J. Scully, A. Gebert, and J.H. Payer: J. Mater. Res., 2007, vol. 22, pp. 302–1310.1557/jmr.2007.0051 ↗
8. K. Asami, S.-J. Pang, T. Zhang, and A. Inoue: J. Electrochem. Soc., 2002, vol. 149, pp. B366–B36910.1149/1.1490537 ↗
9. S.J. Pang, T. Zhang, K. Asami, and A. Inoue: Corros. Sci., 2002, vol. 44, pp. 1847–5610.1016/S0010-938X(02)00002-1 ↗
10. S.J. Pang, T. Zhang, K. Asami, and A. Inoue: Acta Mater., 2002, vol. 50, pp. 489–9710.1016/S1359-6454(01)00366-4 ↗
11. J. Jayaraj, K.B. Kim, H.S. Ahn, and E. Fleury: Mater. Sci. Eng. A, 2007, vols. 449–451, pp. 517–2010.1016/j.msea.2006.02.418 ↗
12. J. Farmer, J. Haslam, S.D. Day, T. Lian, C.K. Saw, P.D. Hailey, J. Choi, N. Yang, C.A. Blue, W.H. Peter, J.H. Payer, and D.J. Branagan: ECS Trans., 2007, vol. 3 (31), pp. 485–9610.1149/1.2789251 ↗
13. J.C. Farmer, D.J. Branagan, C.A. Blue, J.D.K. Rivard, L.F. Aprigliano, N. Yang, J.H. Perepezko, and M.B. Beardsley: Paper presented at the 2005 ASME Pressure Vessels and Piping Division Conf., Denver, CO, July 17–21, 2005
14. J.C. Farmer, J.J. Haslam, S.D. Day, T. Lian, C.K. Saw, P.D. Hailey, J.-S. Choi, R.B. Rebak, N. Yang, J.H. Payer, J.H. Perepezko, K. Hildal, E.J. Lavernia, L. Ajdelsztajn, D.J. Branagan, E.J. Buffa, and L.F. Aprigliano: J. Mater. Res., 2007, vol. 22, pp. 2297–231110.1557/jmr.2007.0291 ↗
15. R.B. Rebak, L.F. Aprigliano, S.D. Day, and J.C. Farmer: Materials Research Society Symposium Proc. 985, Materials Research Society, Pittsburgh, PA, 2007, pp. 321–26
16. G.O. Ilevbare: Corrosion, 2006, vol. 62, pp. 340–5610.5006/1.3280666 ↗
17. K.J. Evans, A. Yilmaz, S.D. Day, L. Wong, J.C. Estill, and R. Rebak: JOM, 2005, vol. 57, pp. 56–6110.1007/s11837-005-0065-6 ↗
18. B.A. Kehler, G.O. Ilevbare, and J.R. Scully: Corrosion, 2001, vol. 57, pp. 1042–6510.5006/1.3281677 ↗
19. P. Pharkya, X. Shan, and J.H. Payer: ECS Trans., 2007, vol. 3 (31), pp. 473–8410.1149/1.2789250 ↗
20. D. Zagidulin, P. Jakupi, B. Sherar, J.J. Noel, and D.W. Shoesmith: ECS Trans., 2007, vol. 3 (31), pp. 419–3010.1149/1.2789246 ↗
21. P. Jakupi, D. Zagidulin, J. Noël, and D.W. Shoesmith: ECS Trans., 2007, vol. 3 (31), pp. 259–7110.1149/1.2789233 ↗
22. M. Miyagusuku and T.M. Devine: Corrosion/2007, NACE International, Houston, TX, 2007, paper no. 07586
23. A.S. Agarwal, U. Landau, X. Shan, and J.H. Payer: ECS Trans., 2007, vol. 3 (31), pp. 459–7110.1149/1.2789249 ↗
24. X. Shan and J.H. Payer: Corrosion/2007, NACE International, Houston TX, 2007, paper no. 07582
25. X. Shan, and J.H. Payer: ECS Trans., 2007, vol. 3 (31), pp. 333–4110.1149/1.2789239 ↗
26. Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2005, vol. 03.02, G48-03
27. R. Rebak: Corrosion/2005, NACE International, Houston, TX, 2005, paper no. 05610
28. K.G. Mon, G.M. Gordon, and R. Rebak: Paper presented at the 12th Int. Conf. on Environmental Degradation of Materials in Nuclear Power System-Water Reactors, Salt Lake City, UT, August 14–18, 2005
29. M.G. Fontana, and N.D. Green: Corrosion Engineering, McGraw-Hill Book Co., New York, NY, 1967, pp. 39–48
30. J.W. Oldfield, and W.H. Sutton: Br. Corros. J., 1978, vol. 13 (1), pp. 13–2210.1179/000705978798358671 ↗
31. E. McCafferty: Corrosion, 1997, vol. 53 (10), pp. 755–6110.5006/1.3290259 ↗