journal article·2014-09

Effect of Welding Current and Time on the Microstructure, Mechanical Characterizations, and Fracture Studies of Resistance Spot Welding Joints of AISI 316L Austenitic Stainless Steel

Danial Kianersi, Amir Mostafaei, Javad Mohammadi

Publisher page

Abstract

This article aims at investigating the effect of welding parameters, namely, welding current and welding time, on resistance spot welding (RSW) of the AISI 316L austenitic stainless steel sheets. The influence of welding current and welding time on the weld properties including the weld nugget diameter or fusion zone, tensile-shear load-bearing capacity of welded materials, failure modes, energy absorption, and microstructure of welded nuggets was precisely considered. Microstructural studies and mechanical properties showed that the region between interfacial to pullout mode transition and expulsion limit is defined as the optimum welding condition. Electron microscopic studies indicated different types of delta ferrite in welded nuggets including skeletal, acicular, and lathy delta ferrite morphologies as a result of nonequilibrium phases, which can be attributed to a fast cooling rate in the RSW process. These morphologies were explained based on Shaeffler, WRC-1992, and pseudo-binary phase diagrams. The optimum microstructure and mechanical properties were achieved with 8-kA welding current and 4-cycle welding time in which maximum tensile-shear load-bearing capacity or peak load of the welded materials was obtained at 8070 N, and the failure mode took place as button pullout with tearing from the base metal. Finally, fracture surface studies indicated that elongated dimples appeared on the surface as a result of ductile fracture in the sample welded in the optimum welding condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. M. Vural and A. Akkus: J. Mater. Process. Technol., 2004, vols. 153–154, pp. 1–6.10.1016/j.jmatprotec.2004.04.063 ↗
2. M. Goodarzi, S.P.H. Marashi, and M. Pouranvari: J. Mater. Process. Technol., 2009, vol. 209, pp. 4379–84.10.1016/j.jmatprotec.2008.11.017 ↗
3. Z. Xiaoyun, C. Guanlong, Z. Yansong, and L. Xinmin: J. Mater. Process. Technol., 2009, vol. 209, pp. 2671–75.10.1016/j.jmatprotec.2008.06.008 ↗
4. L. Han, M. Thornton, and M. Shergold: Mater. Des., 2010, vol. 31, pp. 1457–67.10.1016/j.matdes.2009.08.031 ↗
5. D.Q. Sun, B. Lang, D.X. Sun, and J.B. Li: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 494–98.10.1016/j.msea.2007.01.073 ↗
6. N. Kahraman: Mater. Des., 2007, vol. 28, pp. 420–27.10.1016/j.matdes.2005.09.010 ↗
7. D. Kianersi, A. Mostafaei, and A.A. Amadeh: Mater. Des., 2014, vol. 61, pp. 251–63.10.1016/j.matdes.2014.04.075 ↗
8. M. Pouranvari and S.P.H. Marashi: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8337–43.10.1016/j.msea.2011.08.017 ↗
9. W.H. Kearns: Welding Processes, AWS Welding Handbook, 7th ed., American Welding Society, Macmillan Press Ltd., London, 1980, vol. 3, pp. 1–55.10.1007/978-1-349-04961-5_1 ↗
10. Y. Cui and C.D. Lundin: Mater. Des., 2007, vol. 281, pp. 324–28.10.1016/j.matdes.2005.05.022 ↗
11. D. Ozyurek: Mater. Des., 2008, vol. 29, pp. 597–603.10.1016/j.matdes.2007.03.008 ↗
12. S. Trigwel and G. Selvaduray: J. Mater. Process. Technol., 2005, vol. 166, pp. 30–43.10.1016/j.jmatprotec.2004.07.091 ↗
13. S.H.C. Park, Y.S. Sato, H. Kokawa, K. Okamoto, S. Hirano, and M. Inagaki: Scripta Mater., 2004, vol. 51, pp. 101–05.10.1016/j.scriptamat.2004.04.001 ↗
14. J.C. Lippold and D. Kotecki: Welding Metallurgy and Weldability of Stainless Steels, Wiley-Interscience Publication, Hoboken, NJ, 2005, pp. 143–225.
15. J.C. Lippold and D. Kotecki: Welding Metallurgy and Weldability of Stainless Steels, Wiley-Interscience Publication, Hoboken, NJ, 2005, pp. 19–52.
16. S. Fukumoto, K. Fujiwara, S. Toji, and A. Yamamoto: Mater. Sci. Eng. A, 2008, vol. 492, pp. 243–49.10.1016/j.msea.2008.05.002 ↗
17. M. Pouranvari, S.P.H. Marashi, and D.S. Safanama: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8344–52.10.1016/j.msea.2011.08.016 ↗
18. “Weld Button Criteria, Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials,” American National Standard, 1997, ANSI/AWS/SAE/D8.9, Sections 3.1 and 10.6.
19. “Weld Button Criteria, Recommended Practices for Resistance Spot Welding,” American National Standard, 1997, ANSI/AWS/SAE/C1, Section 1, pp. 1–66.
20. M. Pouranvari, S.M. Mousavizadeh, S.P.H. Marashi, M. Goodarzi, and M. Ghorbani: Mater. Des., 2011, vol. 32, pp. 1390–98.10.1016/j.matdes.2010.09.010 ↗
21. M. Alizadeh-Sh, S.P.H. Marashi, and M. Pouranvari: Mater. Des., 2014, vol. 56, pp. 258–63.10.1016/j.matdes.2013.11.022 ↗
22. A. Hasanbaşoğlu and R. Kaçar: Mater. Des., 2007, vol. 28, pp. 1794–800.10.1016/j.matdes.2006.05.013 ↗
23. F. Khodabakhshi, M. Kazeminezhad, and A.H. Kokabi: Mater. Sci. Eng. A, 2011, vol. 529, pp. 237–45.10.1016/j.msea.2011.09.023 ↗
24. B. Kocabekir, R. Kacar, S. Gunduz, and F. Hayat: J. Mater. Process. Technol., 2008, vol. 195, pp. 327–35.10.1016/j.jmatprotec.2007.05.026 ↗
25. P. Marashi, M. Pouranvari, S. Amirabdollahian, A. Abedi, and M. Goodarzi: Mater. Sci. Eng. A, 2008, vol. 480, pp. 175–80.10.1016/j.msea.2007.07.007 ↗
26. N. Harlin, T.B. Jones, and J.D. Parker: J. Mater. Process. Technol., 2003, vols. 143–144, pp. 448–53.10.1016/S0924-0136(03)00447-3 ↗