journal article·2004-03

Some studies on the thermal-expansion behavior of C-fiber, SiC p , and In-situ Mg2Si-reinforced AZ31 Mg alloy-based hybrid composites

S. K. Thakur, B. K. Dhindaw, N. Hort, K. U. Kainer

Publisher page

Abstract

Magnesium alloy-based hybrid composites with carbon-fiber, SiC p , and in-situ Mg2Si reinforcements have been prepared by the squeeze-infiltration technique. The results of the studies done on the measurement of the coefficient of thermal expansion after thermal cycling of these composites show that the thermal cycling initially leads to rapid linear expansion of the composite. However, the expansion becomes stabilized after a few cycles, pointing toward formation of the stable interfaces due to the formation of stable precipitates. The model for the growth kinetics of these precipitates at the interface shows a rapid initial growth of the precipitates with the number of thermal cycles, which becomes staturated after a few thermal cycles. The thermal treatment of the composite lowers the coefficient of linear thermal expansion, which can be explained on the basis of further stabilization of the interfaces after the thermal treatment.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. A. Luo: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2445–55.10.1007/BF02671259 ↗
2. ASM International Handbook Committee: Metals Handbook, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2.
3. A. Luo, J. Renaud, I. Nakatsugawa, and J. Plourde: JOM, 1995, vol. 7, p. 28.10.1007/BF03221226 ↗
4. Hu Lianxi and Wang Erde: Mater. Sci. Eng. A, 2000, vol. A 278, pp. 267–71.10.1016/S0921-5093(99)00608-5 ↗
5. Karl Ulrich Kainer, Thorsten Ebert, and Barry L. Mordike: Proc. Int. Conf. on Spray Deposition and Melt Atomization, SDMA2000, Universität Bremen, Bremen, Germany, June 26–28, 2000, K. Bauckhage, V. Uhlenwinkel, and U. Fritsching, eds., Books on demand GmBH, Bremen, 2000, pp. 341–354.
6. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol. A 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
7. J. Schröder and K.U. Kainer: Mater. Sci. Eng. A, 1991, vol. A 135, pp. 33–36.10.1016/0921-5093(91)90532-R ↗
8. K.U. Kainer, H. Dieringa, P. Schulz, and J. Reiter: Proc. Int. Congr. on Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH Verlag GmbH, Weinheim, Germany, 2000, pp. 240–45.10.1002/3527607552.ch37 ↗
9. Armin Feldoff, Eckhard Pippel, and Jörg Woltersdorf: Adv. Eng. Mater., 2000, vol. 2 (8), pp. 471–80.10.1002/1527-2648(200008)2:8<471::AID-ADEM471>3.0.CO;2-S ↗
10. L. Aggour, E. Fitzer, M. Heyn, and E. Ignatowitz: Thin Solid Films, 1977, vol. 40, p. 97.10.1016/0040-6090(77)90107-9 ↗
11. I.J. Polmear: Light alloys—Metallurgy of the Light Metals, Edward Arnold, London 1981.
12. I.J. Polmear: in Magnesium Alloys and their Applications, B.L. Mordike and F. Hehmann, eds., DGM Informations-Gesellschaft, Oberursel, 1992, pp. 201–12.
13. M.Ö. Pekgüleryüz and M.M. Avedisian: in Magnesium Alloys and Their Applications, B.L. Mordike and F. Hehmann, eds., DGM Informations-Gesellschaft, Oberursel, 1992, pp. 213–20.
14. H. Westengen: J. Phys. IV, vol. 3 (C7), 1993, pp. 491.10.1051/jp4:1993780 ↗
15. L.D. Wang, W.D. Fei, and C.K. Yao: Mater. Sci. Eng. A, 2002, vol. A 336, pp. 110–16.10.1016/S0921-5093(01)01981-5 ↗
16. C.M. Warwick and T.W. Clyne: in Fundamental Relationship Between Microstructure and Mechanical Properties of Metal-Matrix Composites, P.K. Liaw and M.N. Gungor, eds., TMS, Warrendale, PA, 1990, pp. 209–23.
17. F. Chmelik, Z. Trojanová, J. Kiehn, P. Lukác, and K.U. Kainer: Mater. Sci. Eng. A, 1997, vol. A 234–A236, pp. 774–77.10.1016/S0921-5093(97)00401-2 ↗
18. Z.R. Xu, K.K. Chawla, A. Wolfenden, A. Neuman, G.M. Liggett, and N. Chawla: Mater. Sci. Eng. A, 1995, vol. A 203, pp. 75–80.10.1016/0921-5093(95)09847-X ↗
19. F. Chmelík, J. Kiehn, P. Lukác, K.U. Kainer, and B.L. Mordike: Scripta Mater., 1998, vol. 38 (1), pp. 81–87.10.1016/S1359-6462(97)00416-8 ↗
20. M.H. Lin, W. Buchgraber, G. Korb, and P.W. Kao: Scripta Mater., 2002, vol. 46, pp. 169–73.10.1016/S1359-6462(01)01217-9 ↗
21. S.L. Kuo and P.W. Kao: Mater. Chem. Phys., 1999, vol. 58, pp. 83–6.10.1016/S0254-0584(98)00249-1 ↗
22. H. Hegeler, R. Buschmann, and L. Elstner: in Metallische Verbundwerk-stoffe, K.U. Kainer, ed., DGM Informationsgesellschaft, Verlag, Germany, 1994, pp. 101–16.
23. K.U. Kainer: in Metallische Verbundwerkstoffe, K.U. Kainer, ed., DGM Informationsgesellschaft, Verlag, Germany, 1994, pp. 219–44.
24. S.K. Thakur, B.K. Dhindaw, N. Hort, and K.U. Kainer: Proc. 9th Int. Ann. Conf. on Composites Engineering, ICCE/9, David Hui, ed., San Diego, CA, July, 1–6, 2002, pp. 775–76.
25. S.T. Mileiko: in Handbook of Composites, A. Kelly and S.T. Mileiko, eds., Elsevier Science Publishers B.V., Amsterdam, 1983, vol. 4.
26. G.A. Geffrey and V.Y. Wu: Acta Crystallogr., 1963, vol. 16, pp. 559.10.1107/S0365110X63001468 ↗
27. T.M. Gesing, R. Pöttgen, W. Jeitschko, and U. Wortmann: J. Alloys Compounds 1992, vol. 186, p. 321.10.1016/0925-8388(92)90019-6 ↗
28. C. Quin and R. Metselaar: J. Alloys Compounds, 1994, vol. 216, p. 55.10.1016/0925-8388(94)91042-1 ↗
29. H.M. Flowers and A.J. Morris: in Magnesium Technology, Accession Number 87 (10): 72–565, Institute of Metals, London, 1987, pp. 128–32.
30. J.C. Viala, F. Bosselet, G. Claveyrolas, F.B. Mentzen, and J. Bouix: Eur. J. Solid State Inorg. Chem., 1991, vol. 28, p. 1063.
31. F. Bosselet, B.F. Mentzen, J.C. Viala, M.A. Etoh, and J. Bouix: Eur. J. Solid State Inorg. Chem., 1998, vol. 35, pp. 91.10.1016/S0992-4361(98)80017-9 ↗
32. A. Feldhoff, E. Pippel, and J. Woltersdorf: Phil. Mag. A., 1999, vol. 79, p. 1263.10.1080/01418619908210360 ↗
33. J.C. Viala, G. Claveyrolas, F. Bosselet, and J. Bouix: J. Mater. Sci., 2000, vol. 35, p. 1813.10.1023/A:1004745006226 ↗
34. Feng Wu and Jing Zhu: Compos. Sci. Technol., 1997, vol. 57, pp. 661–67.10.1016/S0266-3538(97)00020-1 ↗
35. D. Toitot, E. Andrieu, and P. Jarry: Proc. 12th Riso Int. Symp. on Metal Matrix Composites—Processing, Microstructure and Properties, N. Hansen, D.J. Jensen, T. Leffers, H. Lilholt, A.S. Pedersen, O.B. Pedersen, and B. Ralph, eds., Risø National Laboratory, Denmark, 1991, pp. 695–700.
36. W.G. Patterson and M. Taya: Proc. 5th Int. Conf. on Composite Materials—ICCM-V, W.C. Harrigan J. Strife, and A. Dhingra, eds., TMS-AIME, Warrendale, PA, 1985, pp. 53–66.
37. Elhem Ghorbel: Compos. Sci. Technol., 1997, vol. 57, pp. 1045–56.10.1016/S0266-3538(96)00172-8 ↗