journal article·2007-09

Static and Cyclic Crack Growth Behavior of Ultrafine-Grained Al Produced by Different Severe Plastic Deformation Methods

Peter Hübner, Rene Kiessling, Horst Biermann, Thomas Hinkel, Werner Jungnickel, Rudolf Kawalla, Heinz-Werner Höppel, Johannes May

Publisher page

Abstract

Fracture-mechanics experiments were carried out on ultrafine-grained (UFG) samples of aluminum and two Al alloys to obtain the fracture behavior under static and cyclic loading. The UFG materials investigated show crack resistance behavior under static loading, which was confirmed by ductile fracture surfaces. Under cyclic load, the crack growth rate was described well by the ESACRACK model. The crack propagation results show no influence of the type of the severe plastic deformation method in the Paris region but more effect in the threshold region.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev, I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–8910.1016/S0079-6425(99)00007-9 ↗
2. T.G. Langdon, M. Furukawa, M. Nemoto, Z. Horita: JOM, 2000, vol. 52, pp. 30–3310.1007/s11837-000-0128-7 ↗
3. C.C. Koch: Scripta Mater., 2003, vol. 49, pp. 657–6210.1016/S1359-6462(03)00394-4 ↗
4. R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu, T.C. Lowe: J. Mater. Res., 2002, vol. 17, pp. 5–810.1557/JMR.2002.0002 ↗
5. V.M. Segal, V.I. Reznikov, V.I. Drobyshevskiy, V.I. Kopylov: Russ. Metall., 1981, vol. 1, pp. 99–105
6. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. 197, pp. 157–6410.1016/0921-5093(95)09705-8 ↗
7. Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, R.G. Hong: Scripta Mater., 1998, vol. 39, pp. 1221–2710.1016/S1359-6462(98)00302-9 ↗
8. N. Tsuji, Y. Saito, S.H. Lee, Y. Minamino: Adv. Eng. Mater., 2003, vol. 5, pp. 338–4410.1002/adem.200310077 ↗
9. R. Kuziak, W. Zalecki, S Weglarczyk, M. Pietrzyk: Solid State Phenomena, 2005, vols. 101–102, pp. 43–4810.4028/www.scientific.net/SSP.101-102.43 ↗
10. A.Y. Vinogradov, S. Nagasaki, V. Patlan, K. Kitagawa, M. Kawazoe: Nanostruct. Mater., 1999, vol. 11, pp. 925–3410.1016/S0965-9773(99)00392-X ↗
11. T. Hanlon, Y.-N. Kwon, S. Suresh: Scripta Mater., 2003, vol. 49, pp. 675–8010.1016/S1359-6462(03)00393-2 ↗
12. C.S. Chung, J.K. Kim, H.K. Kim, W.J. Kim: Mater. Sci. Eng. A, 2002, vol. 337, pp. 39–4410.1016/S0921-5093(02)00010-2 ↗
13. R.A. Mirshams, C.H. Xiao, S.H. Wang, W.M. Yin: Mater. Sci. Eng. A, 2001, vol. 315, pp. 21–2710.1016/S0921-5093(01)01213-8 ↗
14. S. Firstov, M. Brodnikovsky, M. Danylenko, Y. Podrezov: Adv. Mater. Sci., 2003, vol. 4, pp. 155–62
15. H.K. Kim, M.I. Choi, C.S. Chung, D.H. Shin: Mater. Sci. Eng. A, 2003, vol. 340, pp. 243–5010.1016/S0921-5093(02)00178-8 ↗
16. P. Hübner, R. Kiessling, H. Biermann, and A. Vinogradov: Int. J. Mater. Res. (formerly Z. Metallkd.), 2006, vol. 97, pp. 1566–7010.3139/146.101422 ↗
17. J. May, H.W. Höppel, M. Göken: Scripta Mater., 2005, vol. 53, pp. 189–9410.1016/j.scriptamat.2005.03.043 ↗
18. H.W. Höppel, J. May, M. Göken: Adv. Eng. Mater., 2004, vol. 6, pp. 781–8410.1002/adem.200306582 ↗
19. A. Vinogradov, A. Washikita, K. Kitagawa, V.I. Kopylov: Mater. Sci. Eng. A, vol. 349, pp. 318–2610.1016/S0921-5093(02)00813-4 ↗
20. A. Vinogradov, V. Patlan, S. Hashimoto, K. Kitagawa: Phil. Mag. A, 2002, vol. 82, pp. 317–3510.1080/01418610208239601 ↗
21. International Organisation for Standardization (ISO) ISO/FDIS 12135, Genf, 2002
22. Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM E647-00, ASTM, Philadelphia, PA, 2000
23. G. Sinema and T.K. Henriksen: ESACRACK 4.0 Manual. ESTEC, Noordwijk, The Netherlands, 2000
24. K.S. Kumar, H. Van Swygenhoven, S. Suresh: Acta Mater., 2003, vol. 51, pp. 5743–7410.1016/j.actamat.2003.08.032 ↗
25. A.Y. Vinogradov, S. Nagasaki, V. Patlan, K. Kitagawa, M. Kawazoe: Nanostructured Mater., 1999, vol. 11, pp. 925–3410.1016/S0965-9773(99)00392-X ↗
26. A.Y. Vinogradov, K. Kitagawa, V.I. Kopylov: Mater. Sci. Forum, 2005, vols. 503–504, pp. 811–16
27. P.S. Pao, H.N. Jones, S.F. Cheng, C.R. Feng: Int. J. Fatigue, 2005, vol. 27, pp. 1164–6910.1016/j.ijfatigue.2005.06.027 ↗
28. R.O. Ritchie: Int. Met. Rev., 1979, vols. 5–6, pp. 205–29
29. C. Laird: Special Technical Publication 415, ASTM, Philadelphia, PA, 1967, pp. 131–68