journal article·2006-10

Interdiffusion studies between a Mo-based alloy and Ti

A. Laik, G. B. Kale, K. Bhanumurthy

Publisher page

Abstract

Interdiffusion between Ti and a Mo alloy (TZM) has been studied in the temperature range of 1273 to 1373 K. Boltzmann-Matano and Hall’s methods were used to evaluate the interdiffusion coefficients. The microstructure of the TZM/Ti interface showed excellent contact for all specimens bonded above 1273 K. The reaction index (n) evaluated by layer growth kinetics was close to 2. Interdiffusion coefficients increase with the increase in Ti concentration, and a quadratic relationship could be determined between the activation energy and concentration of Ti. Impurity diffusion coefficients of Mo in Ti and the activation energy for diffusion of Mo in Ti were evaluated. A linear dependence between the activation energy (Q) and pre-exponential factor (D 0) for interdiffusion could be established. The diffusion parameters for TZM/Ti in the present studies were also compared with the earlier work on the Mo/Ti system and there seems to be a good correlation between these two studies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. A. Kohyama and S. Tanaka: Proceedings of Japan/China Symposium on Materials for Advanced Energy Systems and Fission and Fusion Engineering ′94, Tokyo, 5–8 June 1994, H. Matsui and H. Takashahi, eds., 1994, pp. 222–28.
2. C.H. Caden and B.C. Odegard, Jr.: J. Nucl. Mater., 2000, vols. 283–287, pp. 1253–57.10.1016/S0022-3115(00)00178-1 ↗
3. G.B. Kale and R.V. Patil: Mater. Trans., JIM, 1994, vol. 35, pp. 439–44.10.2320/matertrans1989.35.439 ↗
4. I. Thibon, D. Ansel, M. Boliveau, and J. Debuigne: Z. Metallkd., 1998, vol. 89, pp. 187–91.
5. J.L. Pouchou and F. Pichoir: Microbeam Analysis, San Francisco Press, San Francisco, CA, 1985.
6. C. Matano: Jpn. J. Phys., 1933, vol. 8, pp. 109–13.
7. L. Boltzmann: Annal. Phys., 1894, vol. 53, pp. 959–64.10.1002/andp.18942891315 ↗
8. A.D. Le Claire: Progr. Met. Phys., 1949, vol. 1, pp. 306–79.10.1016/0502-8205(49)90009-X ↗
9. F.J. Gurney: Master’s Thesis, Air Force Institute of Technology, OH, 1964.
10. L.D. Hall: J. Chem. Phys., 1953, vol. 21, pp. 87–89.10.1063/1.1698631 ↗
11. J. Askill and G.B. Gibbs: Phys. Status Solidi, 1965, vol. 11, pp. 557–65.10.1002/pssb.19650110207 ↗
12. H. Onodera, H. Ohyama, H. Nakajima, H. Takatori, H. Fujita, T. Maeda, H. Takahashi, and S. Watakabe: Def. Diffus. Forum, 1993, vols. 95–98, pp. 729–35.10.4028/www.scientific.net/DDF.95-98.729 ↗
13. G.B. Gibbs, D. Graham, and D.H. Tomlin: Phil. Mag., 1963, vol. 8, pp. 1269–82.10.1080/14786436308207292 ↗
14. C. Zener: J. Appl. Phys., 1951, vol. 22, pp. 372–75.10.1063/1.1699967 ↗
15. R.A. Swalin: J. Appl. Phys., 1956, vol. 27, pp. 554–55.10.1063/1.1722421 ↗
16. J. Pelleg: Acta Met., 1966, vol. 14, pp. 229–31.10.1016/0001-6160(66)90306-3 ↗
17. G.B. Kale: M.Sc. (Tech.), University of Bombay, Bombay, 1979.
18. R.E. Hanneman, R.E. Ogilivie, and H.C. Gatos: Trans. AIME, 1965, vol. 233, pp. 691–98.
19. K. Hirano, Y. Iijima, K. Araki, and H. Homma: Trans. Iron Steel Inst. Jpn., 1977, vol. 17, pp. 194–99.10.2355/isijinternational1966.17.194 ↗
20. J.E. Reynolds, B.L. Averbach, and M. Cohen: Acta Metall., 1957, vol. 5, pp. 29–40.10.1016/0001-6160(57)90152-9 ↗