journal article·2009-11Open access

Effects of Alloying Elements on Microstructure, Hardness, Wear Resistance, and Surface Roughness of Centrifugally Cast High-Speed Steel Rolls

Dae Jin Ha, Hyo Kyung Sung, Joon Wook Park, Sunghak Lee

Abstract

A study was made of the effects of carbon, tungsten, molybdenum, and vanadium on the wear resistance and surface roughness of five high-speed steel (HSS) rolls manufactured by the centrifugal casting method. High-temperature wear tests were conducted on these rolls to experimentally simulate the wear process during hot rolling. The HSS rolls contained a large amount (up to 25 vol pct) of carbides, such as MC, M2C, and M7C3 carbides formed in the tempered martensite matrix. The matrix consisted mainly of tempered lath martensite when the carbon content in the matrix was small, and contained a considerable amount of tempered plate martensite when the carbon content increased. The high-temperature wear test results indicated that the wear resistance and surface roughness of the rolls were enhanced when the amount of hard MC carbides formed inside solidification cells increased and their distribution was homogeneous. The best wear resistance and surface roughness were obtained from a roll in which a large amount of MC carbides were homogeneously distributed in the tempered lath martensite matrix. The appropriate contents of the carbon equivalent, tungsten equivalent, and vanadium were 2.0 to 2.3, 9 to 10, and 5 to 6 pct, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. T. Kudo, S. Kawashima, and R. Kurahashi: ISIJ Int., 1992, vol. 32, pp. 1190–93.10.2355/isijinternational.32.1190 ↗
2. K. Goto, Y. Matsuda, K. Sakamoto, and Y. Sugimoto: ISIJ Int., 1992, vol. 32, pp. 1184–89.10.2355/isijinternational.32.1184 ↗
3. R. Honeycombe and H.K.D.H. Bhadeshia: Steels—Microstructure and Properties, Edward Arnold, London, 1995, ch. 5.
4. M. Hashimoto, S. Otomo, K. Yoshida, K. Kimura, R. Kurahashi, T. Kawakami, and T. Kouga: ISIJ Int., 1992, vol. 32, pp. 1202–10.10.2355/isijinternational.32.1202 ↗
5. W.M. Betts and H.L. Baxter: in Roll for the Metal Working Industries, R.B. Corbett, ed., ISS, Warrendale, PA, 1990, pp. 23–30.
6. S. Lee, K.S. Sohn, C.G. Lee, and B.I. Jung: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 123–34.10.1007/s11661-997-0088-4 ↗
7. J.H. Ryu, O. Kwon, P.J. Lee, and Y.M. Kim: ISIJ Int., 1992, vol. 32, pp. 1221–23.10.2355/isijinternational.32.1221 ↗
8. S.C. Hong, J.C. Ahn, S.Y. Nam, S.J. Kim, H.C. Yang, J.G. Speer, and D.K. Matlock: Met. Mater. Int., 2007, vol. 13, pp. 439–46.10.3365/MMI.2007.12.439 ↗
9. K.C. Hwang, S. Lee, and H.C. Lee: Mater. Sci. Eng., 1998, vol. 254A, pp. 282–95.10.1016/S0921-5093(98)00626-1 ↗
10. S.C. Seo, K.S. Son, S.K. Lee, I.S. Kim, T.J. Lee, C.H. Yim, and D.G. Kim: Met. Mater. Int., 2008, vol. 14, pp. 559–64.10.3365/met.mat.2008.10.559 ↗
11. C.K. Kim, J.I. Park, J.H. Ryu, and S. Lee: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 481–92.10.1007/s11661-004-0359-2 ↗
12. L.A. Dobrzanski: Steel Res., 1986, vol. 57, pp. 37–45.10.1002/srin.198600718 ↗
13. J.E. Shingly and C.R. Mischke: Mechanical Engineering Design, McGraw-Hill, New York, NY, 1989, pp. 71–72.
14. Y. Matsubara, N. Sasaguri, H.Q. Wu, and M. Hashimoto: Imono, 1994, vol. 66, pp. 815–21.
15. P. Thonus, J.C. Herman, J.P. Breyer, M. Sinnaeve, A. Charlier, D. Liquet, and R. Marquet: 38th MWSP Conf. Proc., ISS, Warrendale, PA, 1997, vol. 34, pp. 43–49.
16. S. Lee, D. Suh, S. Oh, and W. Jin: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 696–702.10.1007/s11661-998-0151-9 ↗
17. W. Jin, J.Y. Choi, and Y.Y. Lee: ISIJ Int., 2000, vol. 8, pp. 789–93.10.2355/isijinternational.40.789 ↗
18. G.Z. Wang and J.H. Chen: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1909–17.10.1007/BF02651940 ↗
19. J.J. deBarbedillo and C.J. Trozzi: Iron Steel Eng., 1981, vol. 58, pp. 63–72.
20. L. Zhou, D.-L. Sun, C.S. Liu, and Q. Wu: J. Iron Steel Res., 2006, vol. 13, pp. 49–52.10.1016/S1006-706X(06)60109-X ↗
21. H. Fu, Q. Xiao, and J. Xing: Mater. Sci. Eng., 2008, vol. 479, pp. 253–60.10.1016/j.msea.2007.06.043 ↗
22. C. Rodenburg and W.M. Rainforth: Acta Mater., 2007, vol. 55, pp. 2443–54.10.1016/j.actamat.2006.11.039 ↗
23. D.Y. Shin, C.H. Wee, M.S. Kim, B.D. You, J.W. Han, S.O. Choi, and D.J. Yun: Met. Mater. Int., 2007, vol. 13, pp. 171–77.10.1007/BF03027569 ↗
24. H. Di, X. Zhang, G. Wang, and X. Liu: J. Mater. Process. Technol., 2005, vol. 166, pp. 359–63.10.1016/j.jmatprotec.2004.07.085 ↗
25. D.N. Hanlon and W.M. Rainforth: Wear, 2003, vol. 255, pp. 956–66.10.1016/S0043-1648(03)00083-8 ↗