journal article·2013-02

Effects of Inclusions on Delayed Fracture Properties of Three TWinning Induced Plasticity (TWIP) Steels

Seokmin Hong, Sang Yong Shin, Hyoung Seop Kim, Sunghak Lee, Sung-Kyu Kim, Kwang-Geun Chin, Nack J. Kim

Publisher page

Abstract

In the present study, delayed fracture properties of a high-Mn TWinning Induced Plasticity (TWIP) steel and two Al-added TWIP steels were examined by dipping tests of cup specimens in the boiled water, after which the microcrack formation behavior was analyzed. The TWIP steels contained a small amount of elongated MnS inclusions, spherical-shaped AlN particles, and submicron-sized (Fe,Mn)3C carbides. Since MnS inclusions worked as crack initiation sites, longitudinal cracks were formed along the cup forming direction mostly by MnS inclusions. These cracks were readily grown when high tensile residual stresses affected the cracking or hydrogen atoms were gathered inside cracks, which resulted in the delayed fracture. In the Al-added steels, MnS inclusions acted as crack initiation and propagation sites during cup forming or boiled-water dipping test, but residual stresses applied to MnS might be low for the crack initiation and growth. Thus, longitudinal cracks formed by MnS inclusions did not work much for delayed fracture. AlN particles present in the Al-added steels hardly acted as crack initiation or growth sites for the delayed fracture because of their spherical shape.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. D. Cornette, P. Cugy, A. Hildenbrand, M. Bouzekri, and G. Lovato: SAE Technical Paper of the SAE World Congress, SAE International, Detroit, MI, 2005.
2. M.D. Thorpe and H. Adam: SAE Technical Paper of the SAE World Congress, SAE International, Detroit, MI, 2002.
3. J.M. Jang, S.J. Kim, N.H. Kang, K.M. Cho, and D.W. Suh: Metals Mater. Int., 2009, vol. 15, pp. 909–16.10.1007/s12540-009-0909-7 ↗
4. B.C. De Cooman, L. Chen, H.S. Kim, Y. Estrin, S.K. Kim, and H. Voswinckel: in Microstructure and Texture in Steels, A. Haldar, S. Suwas, and D. Bhattacharjee, eds., 1st ed., Springer Co., New York, NY, 2009, pp. 165–83.10.1007/978-1-84882-454-6_10 ↗
5. O. Bouaziz, S. Allain, and C. Scott: Scripta Mater., 2008, vol. 58, pp. 484–87.10.1016/j.scriptamat.2007.10.050 ↗
6. S. Allain, J.-P. Chateau, and O. Bouaziz: Mater. Sci. Eng., 2004, vol. A387–A389, pp. 143–47.10.1016/j.msea.2004.01.060 ↗
7. O. Bouaziz, S. Allain, C.P. Scott. P Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
8. I. Choi, Y. Park, D. Son, S.-J. Kim, and M. Moon: Metals Mater. Int., 2010, vol. 16, pp. 27–33.10.1007/s12540-010-0027-6 ↗
9. N. Ma, T. Park, D. Kim, C. Kim, and K. Chung: Metals Mater. Int., 2010, vol. 16, pp. 427–39.10.1007/s12540-010-0613-7 ↗
10. K.-G. Chin, C.-Y. Kang. S.Y. Shin, S. Hong, S. Lee, H.S. Kim, K.-H. Kim, and N.J. Kim: Mater. Sci. Eng., 2011, vol. A528, pp. 2922–28.10.1016/j.msea.2010.12.085 ↗
11. O. Grässel, L. Krger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 46, pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
12. O. Bouaziz and N. Guelton: Mater. Sci. Eng., 2001, vol. A319, pp. 246–49.10.1016/S0921-5093(00)02019-0 ↗
13. G. Frommeyer, U. Brüx, and P. Neumann: ISIJ Int., 2003, vol. 43, pp. 438–46.10.2355/isijinternational.43.438 ↗
14. M. Koyama, T. Sawaguchi, K. Ogawa, T. Kikuchi, and M. Murakami: Mater. Sci. Eng., 2008, vol. A497, pp. 353–57.10.1016/j.msea.2008.07.026 ↗
15. A.S. Hamada, L.P. Darjalainen, and M.C. Somani: Mater. Sci. Eng., 2007, vol. A467, pp. 114–24.10.1016/j.msea.2007.02.074 ↗
16. S.K. Kim, J. Choi, S.C. Kang, I.R. Shon, and K.G. Chin: POSCO Technical Report, POSCO, Pohang, Korea, 2006, vol. 10, pp. 106–14.
17. B.K. Zuidema, D.K. Subramanyam, and W.C. Leslie: Metall. Trans. A, 1987, vol. 18A, pp. 1629–39.10.1007/BF02646146 ↗
18. L. Chen, H.S. Kim, S.K. Kim, and B.C. De Cooman: ISIJ Int., 2007, vol. 47, pp. 1804–12.10.2355/isijinternational.47.1804 ↗
19. O. Grässel and G. Frommeyer: Mater. Sci. Technol., 1998, vol. 14, pp. 1231–17.10.1179/026708398790300891 ↗
20. S. Hong, S.Y. Shin, H.S. Kim, S. Lee, S.-K. Kim, K.-G. Chin, and N.J. Kim: Metall. Mater. Trans. A., 2012, vol. 42A, pp. 1870–83.10.1007/s11661-011-1007-2 ↗
21. K.T. Park, G. Kim, S.K. Kim, S.W. Lee, S.W. Hwang, and C.S. Lee: Metals Mater. Int., 2010, vol. 16, pp. 1–6.10.1007/s12540-010-0001-3 ↗
22. Y. Kim, N. Kang, Y. Park, I. Choi, G. Kim, S. Kim, and K. Cho: J. Korean Inst. Metals Mater., 2008, vol. 46, pp. 780–88.
23. M.R. Berrahmoune, S. Berveiller, K. Inal, and E. Patoor: Mater. Sci. Eng., 2006, vol. A 438–440, pp. 262–66.10.1016/j.msea.2006.02.189 ↗
24. M.R. Berrahmoune, S. Berveiller, K. Inal, E. Patoor, C. Simon, and J.C. Glez: Mater. Sci. Forum, 2005, vol. 490–491, pp. 690–95.10.4028/www.scientific.net/MSF.490-491.690 ↗
25. M.S. Ragab and H.Z. Orban: J. Mater. Process. Technol., 2000, vol. 99, pp. 54–61.10.1016/S0924-0136(99)00360-X ↗
26. M. Nagumo, S. Sekiguchi, H. Hayashi, and K. Takai: Mater. Sci. Eng., 2003, vol. A344, pp. 86–91.10.1016/S0921-5093(02)00403-3 ↗
27. P. Sofronis, I.M. Robertson, Y. Liang, D.F. Teter and N. Aravas: in Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, N.R. Moody, A.W. Thompson, R.E. Ricker, G.S. Was, and R.H. Jones, eds., TMS-AIME, Warrendale, PA, 2003, pp. 537–48.
28. M. Koyama, E. Akiyama, and K. Tsuzaki: Corros. Sci., 2012, vol. 54, pp. 1–4.10.1016/j.corsci.2011.09.022 ↗
29. K. Takai and R. Watanuki: ISIJ Int., 2003, vol. 43, pp. 520–26.10.2355/isijinternational.43.520 ↗
30. ASTM E8M-08: Standard Test Methods for Tension Testing of Metallic Materials. Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 2008, vol. 03.01, pp. 1–25.
31. S. Gahr, M.L Grossbeck, and H.K. Birnbaum: Acta Metall., 1977, vol. 25, pp. 125–34.10.1016/0001-6160(77)90116-X ↗
32. J. Toribio, V. Kharin, D. Vergara, J.A. Balnco, and J.G. Ballesteros: Corros. Sci., 2007, vol. 49, pp. 3557–69.10.1016/j.corsci.2007.03.027 ↗
33. T.Y. Jin, Z.Y. Liu, and Y.F. Cheng: Int. J. Hydrogen Energy, 2010, vol. 35. pp. 8014–21.10.1016/j.ijhydene.2010.05.089 ↗
34. A.S. Tetelman and W.D. Robertson: Trans. AIME, 1962, vol. 224, pp. 775–83.
35. J.K. Tien, A.W. Thomson, I.M. Bernstein, and R.J. Richards: Metall. Trans. A, 1976, vol. 7A, pp. 821–29.10.1007/BF02644079 ↗
36. M.R. Louthan: Hydrogen in Metals, ASM, 1974, pp. 53–75.
37. Y.-H. Lee, H.M. Lee, Y. Kim, and S.-H. Nahm: Metals Mater. Int., 2011, vol. 17, pp. 389–95.10.1007/s12540-011-0614-1 ↗
38. S. Bhattacharyya, A. Banerjee, I. Chakrabarti, and S.K. Bhaumik: Eng. Fail. Anal., 2008, vol. 15, pp. 411–19.10.1016/j.engfailanal.2007.01.016 ↗