Finite Element Modeling of the Inertia Friction Welding of Dissimilar High-Strength Steels
Source abstract
Abstract
Finite element (FE) process modeling of inertia friction welding between dissimilar high-strength steels, AerMet® 100 and SCMV, has been carried out using the DEFORM™-2D (v10.0) software. This model was validated against experimental data collected for a test weld performed between the materials; this included process data such as upset and rotational velocities as well as thermal data collected during the process using embedded thermocouples. The as-welded hoop residual stress from the FE model was also compared with experimental measurements taken on the welded component using synchrotron X-ray and neutron diffraction techniques. The modeling work considered the solid-state phase transformations which occur in the steels, and the trends in the residual stress data were well replicated by the model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. C. Weismann: Resistance and Solid State Welding and Other Ioining Processes, 7th ed., vol. 3. American Welding Society, Miami, 1976.
2. M. Preuss and P. Threadgill: in Solid State Welding of Aeroengine Materials. Encyclopedia of Aerospace Engineering 2010, Wiley, Chister, 2010.10.1002/9780470686652.eae222 ↗
3. W.S. Robotham, T.H. Hyde, E.J. Williams, P. Brown, I.R. McColl, and C.J. Kong: 4th Int. Conf. Adv. Exp. Mech., September 6, 2005–September 8, 2005, Southampton, UK: Trans Tech Publications, 2005.
4. Wang, K.K. and P. Nagappan: Weld. J., 1970, vol. 49, pp. 419–26.
5. Wang, K.K. and W. Lin: Weld. J., 1974, vol. 53, pp. 233–42.
6. V.R. Dave, M.J. Cola, and G.N. Hussen: Weld. J. Suppl, 2001, pp. 246–525.
7. A. Moal and E. Massoni: Eng. Comput., 1995, vol. 12, pp. 497–512.10.1108/02644409510799730 ↗
8. A. Moal, E. Massoni, and J.-L. Chenot: Proc. Int. Conf. Comput. Plast., 1992.
9. K. Lee, A. Samant, W.T. Wu, and S. Srivatsa: NUMIFORM, 2001.
10. L. D’Alvise, E. Massonia, and S.J. Walløe: J. Mater. Process. Technol., 2002, vol. 125–126, pp. 387–91.10.1016/S0924-0136(02)00349-7 ↗
11. L. D’Alvise: Development of a finite element model for the simulation of the inertia friction welding process between dissimilar materials, 2002, MINES ParisTech, Paris.
12. L. Wang, M. Preuss, P.J. Withers, G. Baxter, and P. Wilson: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 513–23.10.1007/s11663-005-0043-y ↗
13. B. Grant, M. Preuss, P.J. Withers, G. Baxter, and M. Rowlson: Mater. Sci. Eng. A, 2009, vol. 513–514(C), pp. 366–75.10.1016/j.msea.2009.02.005 ↗
14. C.J. Bennett, T.H. Hyde, and E.J. Williams: Proc. Inst. Mech. Eng., 2007, vol. 221(4), pp. 275–84.
15. A.H. Yaghi, T.H. Hyde, A.A. Becker, and W. Sun: Energy Mater., 2009, vol. 4(3), pp. 113–23.10.1179/174892310X12779109287084 ↗
16. M. Maalekian, E. Kozeschnik, H.P. Brantner, and H. Cerjak: Acta Mater., 2008, vol. 56(12), pp. 2843–55.10.1016/j.actamat.2008.02.016 ↗
17. M.B. Mohammed, C.J. Bennett, P.H. Shipway, and T.H. Hyde: Optimization of Heat Transfer in the Finite Element Process Modelling of Inertia Friction Welding of SCMV and AerMet 100, in Heat Transfer 2010, Tallinn, Estonia, 2010.10.2495/HT100221 ↗
18. M.B. Mohammed, C.J. Bennett, T.H. Hyde, and E.J. Williams: ASME Conf. Proc., 2009, vol. 48852, pp. 829–37.
19. I.S. Grigoriev, E.Z. Meilikhov, and A.A. Radzig: in Handbook of Physical Quantities, 1997, CRC-Press, Boca Raton, 1568.
20. C.J. Bennett: in Inertia Friction Welding of High Strength Aerospace Alloys, 2007, The University of Nottingham, Nottingham.
21. R.J. Moat, D.J. Hughes, A. Steuwer, N. Iqbal, M. Preuss, S.E. Bray, and M. Rawson: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2098–108.10.1007/s11661-009-9915-0 ↗
22. Scientific Forming Technologies Corporation, DEFORM-2D Version 10.0 User’s Manual, J. Fluhrer, ed. 2009.
23. S. Bray: Internal Report, DHC333817, 2009, Rolls-Royce.
24. R. Moat, M. Karadge, M. Preuss, S. Bray, and M. Rawson: J. Mater. Process. Technol., 2008, vol. 204(1–3), pp. 48–58.10.1016/j.jmatprotec.2007.10.074 ↗