journal article·2009-06

Effects of Thermal Exposure and Test Temperature on Structure Evolution and Hardness/Viscosity of an Iron-Based Metallic Glass

A. Shamimi Nouri, Y. Liu, J.J. Lewandowski

Publisher page

Abstract

High-temperature microhardness testing on drop-cast ingots of fully amorphous Fe48Mo14Cr15Y2C15B6 was performed in order to determine the behavior and structure evolution of this Fe-bulk metallic glass under a variety of different test conditions. The effects of changes in test temperature on the microhardness/strength were determined over the temperature range from room temperature to 620 °C. Although high (e.g., >12 GPa) microhardness was exhibited at room temperature, significant hardness reductions were exhibited near T g . In addition, the effect of exposure time (up to 300 minutes) at elevated temperature on the evolution of microhardness/strength was also evaluated for selected temperatures between 25 °C and 620 °C. The microhardness results were complemented with X-ray diffraction (XRD), conventional transmission electron microscopy (TEM), and an in-situ heating TEM study in order to evaluate any structural evolution that could explain the large differences in hardness evolution under different test conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. F.A. Spaepen: Acta Metall., 1977, vol. 25, pp. 407–1510.1016/0001-6160(77)90232-2 ↗
2. A.S. Argon: Acta Metall., 1979, vol. 27, pp. 47–5810.1016/0001-6160(79)90055-5 ↗
3. A.L. Greer and E. Ma, eds., MRS Bull., 2007, vol. 32, pp. 611–1910.1557/mrs2007.121 ↗
4. A.L. Greer: Science, 1995, vol. 267 (5206), pp. 1947–5310.1126/science.267.5206.1947 ↗
5. J.R. Scully, A. Gebert, J.H. Payer: J. Mater. Res., 2007, vol. 22 (2), pp. 302–1310.1557/jmr.2007.0051 ↗
6. D.J. Branagan, A.V. Sergueeva, A.K. Mukherjee: Adv. Eng. Mater., 2006, vol. 8 (10) pp. 940–4310.1002/adem.200600100 ↗
7. J.J. Lewandowski, M. Shazly, A. Shamimi Nouri: Scripta Mater., 2006, vol. 54 (3), pp. 337–4110.1016/j.scriptamat.2005.10.010 ↗
8. P. Wesseling, T.G. Nieh, W.H. Wang, J.J. Lewandowski: Scripta Mater., 2004, vol. 51, pp. 151–5410.1016/j.scriptamat.2004.03.034 ↗
9. B.C. Ko, P. Wesseling, O.L. Vatamanu, G.J. Shiflet, J.J. Lewandowski: Intermetallics, 2002, vol. 10, pp. 1099–110310.1016/S0966-9795(02)00164-4 ↗
10. K. Hildal, N. Sekido, J.H. Perepezko: Intermetallics, 2006, vol. 14, pp. 898–90210.1016/j.intermet.2006.01.036 ↗
11. K. Hildal, J.H. Perepezko, and L. Kaufman: Materials Science and Technology Conference Proceedings, pp. 361–69
12. B.R Lawn, T.R. Wilshaw: Fracture of Brittle Solids, Cambridge University Press, New York, NY, 1975
13. X.J. Gu, S.J. Poon, G.J. Shiflet: J. Mater. Res., 2007, vol. 22 (2), pp. 344–5110.1557/jmr.2007.0036 ↗
14. J.J. Lewandowski, X.J. Gu, A. Shamimi Nouri, S.J. Poon, G.J. Shiflet: Appl. Phys. Lett., 2008, vol. 92, pp. 091918-1–091918-310.1063/1.2890489 ↗
15. A.H. Vormelker, L.O. Vatamanu, L. Kecskes, and J.J. Lewandowski: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1922–3410.1007/s11661-007-9410-4 ↗
16. P. Wesseling, B.C. Ko, L.O. Vatamanu, G.J. Shiflet, and J.J. Lewandowski: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1935–4110.1007/s11661-007-9384-2 ↗
17. Z.P. Lu, C.T. Liu, W.D. Porter: Appl. Phys. Lett., 2003, vol. 83 (13), pp. 2581–8310.1063/1.1614833 ↗
18. Z.P. Lu, C.T. Liu, J.R. Thompson, W.D. Porter: Phys. Rev. Lett., 2004, vol. 92 (24), p. 245503–110.1103/PhysRevLett.92.245503 ↗
19. V. Ponnambalam, S. Joseph Poon, Gary J. Shiflet: J. Mater. Res., 2004, vol. 19 (10), pp. 3046–5210.1557/JMR.2004.0374 ↗
20. Pearson’s Handbook of Crystallographic Data for Intermetallic Phase, P. Villars and L.D. Calvert, eds., ASM INTERNATIONAL, Metals Park, OH, 1985
21. T.A. Waniuk, R. Busch, A. Masuhr, W.L. Johnson: Acta Mater., 1998, vol. 46 (15), pp. 5229–3610.1016/S1359-6454(98)00242-0 ↗
22. R. Busch, E. Bakke, W.L. Johnson: Acta Mater., 1998, vol. 46 (13), pp. 4725–3210.1016/S1359-6454(98)00122-0 ↗
23. F.A. McClintock, S.A. Argon: Mechanical Behavior of Materials, Addison-Wesley, Reading, MA, 1966, p. 273
24. A. Shamimi Nouri: Ph.D. Thesis, Case Western Reserve University, Cleveland, OH, 2008
25. Y. Kawamura, A. Inoue: Appl. Phys. Lett., 2000, vol. 77 (8), pp. 1114–1610.1063/1.1289502 ↗
26. S. Mukherjee, J. Schroers, Z. Zhou, W.L. Johnson, W.-K. Rhim: Acta Mater., 2004, vol. 52, pp. 3689–9510.1016/j.actamat.2004.04.023 ↗
27. J.J. Lewandowski, W.H. Wang, A.L. Greer: Philos. Mag. Lett., 2005, vol. 85, pp. 77–8710.1080/09500830500080474 ↗