journal article·2015-11

Microstructure Evolution Associated with a Superior Low-Cycle Fatigue Resistance of the Fe-30Mn-4Si-2Al Alloy

Ilya Nikulin, Takahiro Sawaguchi, Kazuyuki Ogawa, Kaneaki Tsuzaki

Publisher page

Abstract

The microstructure evolution responsible for the superior low-cycle fatigue (LCF) resistance (N f > 8000 cycles at a total strain range of 2 pct) was studied in the Fe-30Mn-4Si-2Al alloy susceptible to strain-induced martensitic transformation. To investigate the microstructure effect on the LCF behaviors of the alloy, a series of interrupted fatigue tests at total strain range of 2 pct were carried out. A characteristic softening stage followed by the secondary hardening was observed during cyclic loading of the studied alloy. This softening is associated with the strain localization caused by persistent Luders bands formation and the transformation of Luders bands into strain-induced e-martensite is found to have a key role in the delayed fatigue fracture of the alloy being studied. Therefore, the continuous transformation process involving Luders bands and e-martensite formation associated with intermediate stacking fault energy (SFE) (γ SF of 14 mJ/m2) is necessary to prevent the rearrangement of dislocations into walls/channels and substructures inherent to high-SFE (γ SF higher 20 mJ/m2) alloys capable to accelerated fatigue damage. However, sluggish martensite transformation kinetics is necessary to delay the formation of the e-martensite associated with the development and propagation of fatigue crack in alloys with very low SFE.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011 vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
2. O. Grässel, L. Kruger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
3. L.P. Karjalainen, A. Hamada, R. Devesh, R.D.K. Misra, and D.A. Porter: Scripta Mater., 2012, vol. 66, pp. 1034–39.10.1016/j.scriptamat.2011.12.008 ↗
4. G. Chalant, and L. Remy: Acta Metall., 1980, vol. 28, pp. 75–88.10.1016/0001-6160(80)90042-5 ↗
5. J.-O. Nilsson: Scripta Metall., 1983, vol. 17, pp. 593–96.10.1016/0036-9748(83)90383-6 ↗
6. A. Glage, A. Weidner, and H. Biermann: Steel Res. Int., 2011, vol. 82, pp. 1040–47.10.1002/srin.201100080 ↗
7. T. Niendorf, C. Lotze, D. Canadinc, A. Frehn, and H.J. Maier: Mater. Sci. Eng. A, 2009, vol. 499, pp. 518–24.10.1016/j.msea.2008.09.033 ↗
8. F. Hahnenberger, M. Smaga, and D. Eifler: Proc. Eng., 2011, vol. 10, pp. 625–30.10.1016/j.proeng.2011.04.104 ↗
9. I. Nikulin, T. Sawaguchi, and K. Tsuzaki: Mater. Sci. Eng. A, 2013, vol. 587, pp. 192–200.10.1016/j.msea.2013.08.061 ↗
10. H. Otsuka, H. Yamada, T. Maruyama, H. Tanahashi, S. Matsuda, and M. Murakami: ISIJ Int., 1990, vol. 30, pp. 674–79.10.2355/isijinternational.30.674 ↗
11. M. Koyama, M. Murakami, K. Ogawa, T. Kikuchi, and T. Sawaguchi: Mater. Trans., 2007, vol. 48, pp. 2729–34.10.2320/matertrans.MRA2007124 ↗
12. T. Sawaguchi, I. Nikulin, K. Ogawa, K. Sekido, S. Takamori, T. Maruyama, Y. Chiba, A. Kushibe, Y. Inoue, and K. Tsuzaki: Scripta Mater., 2015, vol. 99, pp. 49–52.10.1016/j.scriptamat.2014.11.024 ↗
13. X. Jin, J. Zhang and T.Y. Hsu: Mater. Des., 2000, vol. 21, pp. 537–39.10.1016/S0261-3069(00)00006-6 ↗
14. S. Vercammen, B. Blanpain, B.C. de Cooman, and P. Wollants: Acta Mater., 2004, vol. 52, pp. 2005–12.10.1016/j.actamat.2003.12.040 ↗
15. I. Nikulin, T. Sawaguchi, K. Ogawa, and K. Tsuzaki: Mater. Sci. Forum, 2014, Vols. 783-786, pp. 944–49.10.4028/www.scientific.net/MSF.783-786.944 ↗
16. ASTM E606/E606M-12 Standard test method for strain-controlled fatigue testing.
17. A.H. Cottrell: Dislocations and Plastic Flow in Crystals, Oxford University Press, London, 1953. p. 223.
18. D. Kuhlmann-Wilsdorf, and C. Laird: Mater. Sci. Eng., 1979, vol. 37, pp. 111–20.10.1016/0025-5416(79)90074-0 ↗
19. S.I. Wright, M.M. Nowell and D.P. Field: Microsc. Microanal., 2011, vol. 17, pp. 316–29.10.1017/S1431927611000055 ↗
20. M.-S. Pham, and S.R. Holdsworth: Metall. Mater. Trans., 2014, vol. 45A, pp. 738–51.10.1007/s11661-013-1981-7 ↗
21. Y. Li, and C. Laird: Mater. Sci. Eng. A, 1994, vol. 186, pp. 87–103.10.1016/0921-5093(94)90307-7 ↗
22. T.B. Britton, S. Birosca, M. Preuss, and A. J. Wilkinson: Scripta Mater., 2010, vol. 62, pp. 639–42.10.1016/j.scriptamat.2010.01.010 ↗
23. M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2738–46.10.1016/j.msea.2010.01.004 ↗
24. P. Li, S.X. Li, Z.G. Wang, and Z.F. Zhang: Prog. Mater. Sci., 2011, vol. 56, pp. 328–77.10.1016/j.pmatsci.2010.12.001 ↗
25. L. Buchinger, A.S. Cheng, S. Stanzl, and C. Laird: Mater. Sci. Eng., 1986, vol. 80, pp. 155–67.10.1016/0025-5416(86)90194-1 ↗
26. H. Fujita, and S. Ueda: Acta Metall., 1972, vol. 20, pp. 759–67.10.1016/0001-6160(72)90104-6 ↗
27. C. Laird: Fatigue in: Physical Metallurgy, R.W. Cahn, P. Haasen, Eds. 4 th ed., North-Holland, Amsterdam, 1996, pp. 2293–397.10.1016/B978-044489875-3/50032-6 ↗
28. T. Kruml, J. Pola´k, K. Obrtli´k, and S. Degallaix: Acta Mater., 1997, vol. 45, pp. 5145–51.10.1016/S1359-6454(97)00178-X ↗
29. K. Datta, R. Delhez, P.M. Bronsveld, J. Beyer, H.J.M. Geijselaers, and J. Post, Acta Mater., 2009, vol. 57, pp. 3321–26.10.1016/j.actamat.2009.03.039 ↗
30. C.C. Wu, S.H. Wang, C.Y. Chen, J.R. Yang, P.K. Chiu, and J. Fang: Scripta Mater., 2007, vol. 56, pp. 717–20.10.1016/j.scriptamat.2006.08.064 ↗
31. P. Hedström, U. Lienert, J. Almer, and M. Odén: Mater. Lett., 2008, vol. 62, pp. 338–40.10.1016/j.matlet.2007.05.054 ↗
32. G.A. Miller, D.H. Avery, and W.A. Backofen: Trans. TMS-AIME, 1966, vol. 236, pp. 1667–72.
33. Z. Wang: Philos. Mag., 2004, vol. 84, pp. 351–79.10.1080/14786430310001639824 ↗
34. V. Gerold, and H.P. Karnthaler: Acta Metall., 1989, vol. 37, pp. 2177–83.10.1016/0001-6160(89)90143-0 ↗
35. V.V. Bliznuk, V.G. Gavriljuk, G.P. Kopitsa, S.V. Grigoriev, and V.V. Runov: Acta Mater., 2004, vol. 52, pp. 4791–99.10.1016/j.actamat.2004.06.036 ↗
36. F. Hamdi, and S. Asgari: Scripta Mater., 2010, vol. 62, pp. 693–96.110.1016/j.scriptamat.2010.01.031 ↗
37. V.G. Gavriljuk, B.D. Shanina, and H. Berns: Acta Mater., 2000, vol. 48, pp. 3879–93.10.1016/S1359-6454(00)00192-0 ↗
38. N.I. Medvedeva, M.S. Park, D.C. Van Aken, and J.E. Medvedev: J. Alloys Compd., 2014, vol. 582, pp. 475–82.10.1016/j.jallcom.2013.08.089 ↗
39. T.S. Byun: Acta Mater., 2003, vol. 51, pp. 3063–71.10.1016/S1359-6454(03)00117-4 ↗
40. L. Bracke, L. Kestens, and J. Penning: Scripta Mater., 2009, vol. 61, pp. 220–22.10.1016/j.scriptamat.2009.03.045 ↗
41. S. Curtze, V.-T. Kuokkala, A. Oikari, J. Talonen, and H. Hanninen: Acta Mater., 2011, vol. 59, pp. 1068–76.10.1016/j.actamat.2010.10.037 ↗
42. G.B. Olson and M. Cohen: J. Less-Common Met., 1972, vol. 28, pp. 107–18.10.1016/0022-5088(72)90173-7 ↗