journal article·2018-06

Wear-Induced Changes in FSW Tool Pin Profile: Effect of Process Parameters

Pankaj Sahlot, Kaushal Jha, G. K. Dey, Amit Arora

Publisher page

Abstract

Friction stir welding (FSW) of high melting point metallic (HMPM) materials has limited application due to tool wear and relatively short tool life. Tool wear changes the profile of the tool pin and adversely affects weld properties. A quantitative understanding of tool wear and tool pin profile is crucial to develop the process for joining of HMPM materials. Here we present a quantitative wear study of H13 steel tool pin profile for FSW of CuCrZr alloy. The tool pin profile is analyzed at multiple traverse distances for welding with various tool rotational and traverse speeds. The results indicate that measured wear depth is small near the pin root and significantly increases towards the tip. Near the pin tip, wear depth increases with increase in tool rotational speed. However, change in wear depth near the pin root is minimal. Wear depth also increases with decrease in tool traverse speeds. Tool pin wear from the bottom results in pin length reduction, which is greater for higher tool rotational speeds, and longer traverse distances. The pin profile changes due to wear and result in root defect for long traverse distance. This quantitative understanding of tool wear would be helpful to estimate tool wear, optimize process parameters, and tool pin shape during FSW of HMPM materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 39, pp. 642–58.10.1007/s11661-007-9459-0 ↗
2. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R Reports, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
3. B. Thompson and S.S. Babu: Weld. J., 2010, vol. 89, pp. 256–61.
4. S.H.C. Park, Y.S. Sato, H. Kokawa, K. Okamoto, S. Hirano, and M. Inagaki: Metall. Mater. Trans. A, 2009, vol. 40, pp. 625–36.10.1007/s11661-008-9709-9 ↗
5. A.L. Pilchak, W. Tang, H. Sahiner, A.P. Reynolds, and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42, pp. 745–62.10.1007/s11661-010-0439-4 ↗
6. R. Rai, A. De, H.K.D.H. Bhadeshia, and T. DebRoy: Sci. Technol. Weld. Join., 2011, vol. 16, pp. 325–42.10.1179/1362171811Y.0000000023 ↗
7. A.F. Hasan, C.J. Bennett, P.H. Shipway, S. Cater, and J. Martin: J. Mater. Process. Technol., 2017, vol. 241, pp. 129–40.10.1016/j.jmatprotec.2016.11.009 ↗
8. S. Hanke, G.V.B. Lemos, L. Bergmann, D. Martinazzi, J.F. dos Santos, and T.R. Strohaecker: Wear, 2017, vol. 376–377, pp. 403–8.10.1016/j.wear.2017.01.070 ↗
9. R.S. Mishra and M.W. Mahoney: ASM Int., 2007, pp. 1–368.
10. J. Wang, J. Su, R.S. Mishra, R. Xu, and J.A. Baumann: Wear, 2014, vol. 321, pp. 25–32.10.1016/j.wear.2014.09.010 ↗
11. R.A. Prado, L.E. Murr, D.J. Shindo, and K.F. Soto: Scr. Mater., 2001, vol. 45, pp. 75–80.10.1016/S1359-6462(01)00994-0 ↗
12. D. Choi, C. Lee, B. Ahn, and J. Choi: Int. J. Refract. Met. Hard Mater., 2009, vol. 27, pp. 931–6.10.1016/j.ijrmhm.2009.05.002 ↗
13. M.P. Miles, C.S. Ridges, Y. Hovanski, J. Peterson, M.L. Santella, and R. Steel: Sci. Technol. Weld. Join., 2011, vol. 16, pp. 642–7.10.1179/1362171811Y.0000000047 ↗
14. R. Nandan, G.G. Roy, T.J. Lienert, and T. Debroy: Acta Mater., 2007, vol. 55, pp. 883–95.10.1016/j.actamat.2006.09.009 ↗
15. M. Mehta, A. Arora, A. De, and T. DebRoy: Metall. Mater. Trans. A, 2011, vol. 42, pp. 2716–22.10.1007/s11661-011-0672-5 ↗
16. A. Pradeep and S. Muthukumaran: Int. J. Adv. Manuf. Technol., 2016, vol. 84, pp. 1153–62.
17. A. Fall, M. Fesharaki, A. Khodabandeh, and M. Jahazi: Metals (Basel)., 2016, vol. 6, pp. 1–12.10.3390/met6110275 ↗
18. A.H. Feng and Z.Y. Ma: Scr. Mater., 2007, vol. 57, pp. 1113–6.10.1016/j.scriptamat.2007.08.020 ↗
19. A.R. Nasresfahani, A.R. Soltanipur, K. Farmanesh, and A. Ghasemi: Mater. Sci. Technol., 2016, vol. 33, pp. 583–91.10.1080/02670836.2016.1237065 ↗
20. D.J. Shindo, A.R. Rivera, and L.E. Murr: J. Mater. Sci., 2002, vol. 7, pp. 4999–5005.10.1023/A:1021023329430 ↗
21. G.J. Fernandez and L.E. Murr: Mater. Charact., 2004, vol. 52, pp. 65–75.10.1016/j.matchar.2004.03.004 ↗
22. Prado, L. Murr, K. Soto, and J. McClure: Mater. Sci. Eng. A, 2003, vol. 349, pp. 156–65.10.1016/S0921-5093(02)00750-5 ↗
23. Y.S. Sato, M. Miyake, S. Susukida, H. Kokawa, T. Omori, and K. Ishida: in Friction Stir Welding Symposium and Processing VIII, John Wiley & Sons, 2015, pp. 39–46.10.1007/978-3-319-48173-9_4 ↗
24. T.J. Prater, A.M. Strauss, G.E. Cook, B.T. Gibson, and C.D. Cox: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3757–64.10.1007/s11661-013-1701-3 ↗
25. S.J. Barnes, A.R. Bhatti, A. Steuwer, R. Johnson, J. Altenkirch, and P.J. Withers: Metall. Mater. Trans. A, 2012, vol. 43, pp. 2342–55.10.1007/s11661-012-1110-z ↗
26. T. Prater, A.M. Strauss, G.E. Cook, C. Machemehl, P. Sutton, and C. Cox: J. Manuf. Technol. Res., 2010, vol. 2, pp. 45–57.
27. H.J. Liu, J.C. Feng, H. Fujii, and K. Nogi: Int. J. Mach. Tools Manuf., 2005, vol. 45, pp. 1635–9.10.1016/j.ijmachtools.2004.11.026 ↗
28. W. Gan, Z.T. Li, and S. Khurana: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 610–3.10.1179/174329307X213792 ↗
29. B. Gibson, G. Cook, T. Prater, W. Longhurst, A. M. Strauss, and C.D. Cox: Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2011, vol. 225, pp. 1293–1303.10.1177/2041297510393629 ↗
30. T. Nakazawa, K. Tanaka, K. Sakairi, Y.S. Sato, H. Kokawa, T. Omori, K. Ishida, and S. Hirano: in 11th Friction stir welding symposium, vol. 1, The Welding Institute, 2016, pp. 4–9.
31. K.R. Seighalani, M.K.B. Givi, A.M. Nasiri, and P. Bahemmat: J. Mater. Eng. Perform., 2010, vol. 19, pp. 955–62.10.1007/s11665-009-9582-8 ↗
32. M. Ghosh, K. Kumar, S.V. Kailas, and a. K. Ray: Mater. Des., 2010, vol. 31, pp. 3033–7.10.1016/j.matdes.2010.01.028 ↗
33. A. Steuwer, S.J. Barnes, J. Altenkirch, R. Johnson, and P.J. Withers: Metall. Mater. Trans. A, 2012, vol. 43, pp. 2356–65.10.1007/s11661-011-0643-x ↗
34. K. Surekha and A. Els-Botes: Trans. Indian Inst. Met., 2012, vol. 65, pp. 259–64.10.1007/s12666-012-0127-8 ↗
35. Y. Zhang, Y.S. Sato, H. Kokawa, S.H.C. Park, and S. Hirano: Mater. Sci. Eng. A, 2008, vol. 488, pp. 25–30.10.1016/j.msea.2007.10.062 ↗
36. T. Weinberger, N. Enzinger, and H. Cerjak: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 210–5.10.1179/136217109X406956 ↗
37. A. Feng, B. Xiao, and Z. Ma: Compos. Sci. Technol., 2008, vol. 68, pp. 2141–8.10.1016/j.compscitech.2008.03.010 ↗
38. J.F. Archard: J. Appl. Phys., 1953, vol. 24, pp. 981–8.10.1063/1.1721448 ↗
39. J.F. Archard: J. Appl. Phys., 1961, vol. 32, p. 1420.10.1063/1.1728372 ↗
40. J.T. Burwell and C.D. Strang: J. Appl. Phys., 1952, vol. 23, pp. 18–28.10.1063/1.1701970 ↗
41. P. Sahlot, K. Jha, G.K. Dey, and A. Arora: Wear, 2017, vol. 378, pp. 82–9.10.1016/j.wear.2017.02.009 ↗
42. L. Commin, M. Dumont, J.E. Masse, and L. Barrallier: Acta Mater., 2009, vol. 57, pp. 326–34.10.1016/j.actamat.2008.09.011 ↗
43. R.W. Fonda, J.F. Bingert, and K.J. Colligan: Scr. Mater., 2004, vol. 51, pp. 243–8.10.1016/j.scriptamat.2004.04.017 ↗
44. E. Rabinowicz: Proc. Phys. Soc. Sect. B, 1953, vol. 66, pp. 929–36.10.1088/0370-1301/66/11/304 ↗
45. S. Abachi, M. Akkök, and M. İlhan Gökler: Tribol. Int., 2010, vol. 43, pp. 467–73.10.1016/j.triboint.2009.07.011 ↗
46. J. Andersson, A. Almqvist, and R. Larsson: Wear, 2011, vol. 271, pp. 2947–52.10.1016/j.wear.2011.06.018 ↗
47. J. Schmale, A. Fehrenbacher, A. Shrivastava, and F.E. Pfefferkorn: Measurement, 2016, vol. 88, pp. 331–42.10.1016/j.measurement.2016.02.065 ↗
48. A. Arora, M. Mehta, A. De, and T. DebRoy: Int. J. Adv. Manuf. Technol., 2012, vol. 61, pp. 911–20.10.1007/s00170-011-3759-7 ↗
49. W. Tang, X. Guo, J.C. McCLURE, L.E. Murr, and A. Nunes: J. Mater. Process. Manuf. Sci., 1998, 7, vol. 7.10.1106/55TF-PF2G-JBH2-1Q2B ↗
50. A. Arora, R. Nandan, A. Reynolds, and T. DebRoy: Scr. Mater., 2009, vol. 60, pp. 13–6.10.1016/j.scriptamat.2008.08.015 ↗
51. A. Arora, T. Debroy, and H.K.D.H. Bhadeshia: Acta Mater., 2011, vol. 59, pp. 2020–8.10.1016/j.actamat.2010.12.001 ↗
52. R. Nandan, G. Roy, and T. Debroy: Metall. Mater. Trans. A, 2006, vol. 37, pp. 1247–59.10.1007/s11661-006-1076-9 ↗
53. R. Nandan, T. Debroy, and H. Bhadeshia: Prog. Mater. Sci., 2008, vol. 53, pp. 980–1023.10.1016/j.pmatsci.2008.05.001 ↗
54. M. Mahoney and W. Bingel: Tool Development for Friction Stir Welding, Rockwell Scientific Co, internal report, Thousand Oaks, CA, 2002.
55. O. Lorrain, V. Favier, H. Zahrouni, and D. Lawrjaniec: J. Mater. Process. Technol., 2010, vol. 210, pp. 603–9.10.1016/j.jmatprotec.2009.11.005 ↗
56. L. Fratini, G. Buffa, D. Palmeri, J. Hua, and R. Shivpuri: J. Eng. Mater. Technol., 2006, vol. 128, pp. 428–35.10.1115/1.2204946 ↗