journal article·2017-11Open access

Influence of Filler Alloy Composition and Process Parameters on the Intermetallic Layer Thickness in Single-Sided Cold Metal Transfer Welding of Aluminum-Steel Blanks

Zahra Silvayeh, Rudolf Vallant, Christof Sommitsch, Bruno Götzinger, Werner Karner, Matthias Hartmann

Abstract

Abstract Hybrid components made of aluminum alloys and high-strength steels are typically used in automotive lightweight applications. Dissimilar joining of these materials is quite challenging; however, it is mandatory in order to produce multimaterial car body structures. Since especially welding of tailored blanks is of utmost interest, single-sided Cold Metal Transfer butt welding of thin sheets of aluminum alloy EN AW 6014 T4 and galvanized dual-phase steel HCT 450 X + ZE 75/75 was experimentally investigated in this study. The influence of different filler alloy compositions and welding process parameters on the thickness of the intermetallic layer, which forms between the weld seam and the steel sheet, was studied. The microstructures of the weld seam and of the intermetallic layer were characterized using conventional optical light microscopy and scanning electron microscopy. The results reveal that increasing the heat input and decreasing the cooling intensity tend to increase the layer thickness. The silicon content of the filler alloy has the strongest influence on the thickness of the intermetallic layer, whereas the magnesium and scandium contents of the filler alloy influence the cracking tendency. The layer thickness is not uniform and shows spatial variations along the bonding interface. The thinnest intermetallic layer (mean thickness < 4 µm) is obtained using the silicon-rich filler Al-3Si-1Mn, but the layer is more than twice as thick when different low-silicon fillers are used.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. S. Oliver, T.B. Jones, and G. Fourlaris: Mater. Sci. Technol., 2007, vol. 23, no. 4, pp. 423-31.10.1179/174328407X168937 ↗
2. B.C. De Cooman, O. Kwon, and K.G. Chin: Mater. Sci. Technol., 2012, vol. 28, no. 5, pp. 513-27.10.1179/1743284711Y.0000000095 ↗
3. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, and A. Vieregge: Mater. Sci. Eng., 2000, vol. A280, pp. 37-49.10.1016/S0921-5093(99)00653-X ↗
4. J. Hirsch: Mater. Trans., 2011, vol. 52, no. 5, pp. 818-24.10.2320/matertrans.L-MZ201132 ↗
5. J.E. Gould: Weld. J., 2012, vol. 91, no. 1, pp. 23-34.
6. U. Dilthey, and L. Stein: Sci. Technol. Weld. Join., 2006, vol. 11, no. 2, pp. 135-42.10.1179/174329306X85967 ↗
7. T. Sakiyama, Y. Naito, Y. Miyazaki, T. Nose, G. Murayama, K. Saita, and H. Oikawa: Nippon Steel Techn. Rep., 2013, vol. 103, pp. 91-97.
8. G. Meschut, M. Matzke, R. Hoerhold, and T. Olfermann: Procedia CIRP, 2014, vol. 23, pp. 19-23.10.1016/j.procir.2014.10.089 ↗
9. ASM Handbook, Volume 6: Welding, Brazing and Soldering, ASM International, Materials Park, OH, 1993.
10. D.R.G. Achar, J. Ruge, and S. Sundaresan: Aluminium, 1980, vol. 56 (2), pp. 147–49; (3), pp. 220–23; (4), pp. 291–93.
11. M. Mazar Atabaki, M. Nikodinovski, P. Chenier, J. Ma, M. Harooni, and R. Kovacevic: J. Manuf. Sci. Prod., 2014, vol. 14, no. 2, pp. 59-78.
12. Fronius International GmbH: Cold Metal Transfer - The Technology, 2011, http://www.fronius.com/.
13. C.G. Pickin and K. Young: Sci. Technol. Weld. Join., 2006, vol. 11, no. 5, pp. 583-85.10.1179/174329306X120886 ↗
14. C.G. Pickin, S.W. Williams, and M. Lunt: J. Mater. Process. Technol., 2011, vol. 211, pp. 496-502.10.1016/j.jmatprotec.2010.11.005 ↗
15. J. Feng, H. Zhang, and P. He: Mater. Design, 2009, vol. 30, pp. 1850-52.10.1016/j.matdes.2008.07.015 ↗
16. H. Pinto, A. Pyzalla, H. Hackl, and J. Bruckner: Mater. Sci. Forum, 2006, vols. 524-525, pp. 627-32.10.4028/www.scientific.net/MSF.524-525.627 ↗
17. L. Agudo, S. Weber, H. Pinto, E. Arenholz, J. Wagner, H. Hackl, J. Bruckner, and A. Pyzalla: Mater. Sci. Forum, 2008, vols. 571-572, pp. 347-53.10.4028/www.scientific.net/MSF.571-572.347 ↗
18. L. Agudo Jácome, N. Jank, and J. Wagner: Steel Res. Int., 2008, vol. 79, no. 7, pp. 530-35.10.1002/srin.200806162 ↗
19. L. Agudo Jácome, S. Weber, A. Leitner, E. Arenholz, J. Bruckner, H. Hackl, and A.R. Pyzalla: Adv. Eng. Mater., 2009, vol. 11, no. 5, pp. 350-58.10.1002/adem.200800319 ↗
20. J. Bruckner: Weld. J., 2005, vol. 84, no. 6, pp. 38-40.
21. L. Agudo, D. Eyidi, C.H. Schmaranzer, E. Arenholz, N. Jank, J. Bruckner, and A.R. Pyzalla: J. Mater. Sci., 2007, vol. 42, no. 12, pp. 4205-14.10.1007/s10853-006-0644-0 ↗
22. H.T. Zhang, J.C. Feng, P. He, and H. Hackl: Mater. Charact., 2007, vol. 58, pp. 588-92.10.1016/j.matchar.2006.07.008 ↗
23. H.T. Zhang, J.C. Feng, and P. He: Mater. Sci. Technol., 2008, vol. 24, no. 11, pp. 1346-49.10.1179/174328407X213152 ↗
24. H.T. Zhang, J.C. Feng, P. He, B.B. Zhang, J.M. Chen, and L. Wang: Mater. Sci. Eng., 2009, vol. A499, pp. 111-13.10.1016/j.msea.2007.11.124 ↗
25. S. Yang, J. Zhang, J. Lian, and Y. Lei: Mater. Design, 2013, vol. 49, pp. 602-12.10.1016/j.matdes.2013.01.045 ↗
26. Cao R., Sun J.H., Chen J.H., Wang P. J. Manuf. Sci. Eng., 2014, vol. 136, pp. 051015-1-10.10.1115/1.4028012 ↗
27. S. Madhavan, M. Kamaraj, and L. Vijayaraghavan: Sci. Technol. Weld. Join., 2016, vol. 21, no. 3, pp. 194-200.10.1179/1362171815Y.0000000082 ↗
28. S. Niu, S. Chen, H. Dong, D. Zhao, X. Zhang, X. Guo, and G. Wang: J. Mater. Eng. Perform., 2016, vol. 25, pp. 1839-47.10.1007/s11665-016-2035-2 ↗
29. E. Ünel and E. Taban: Weld. World, 2017, vol. 61, pp. 1-9.10.1007/s40194-016-0386-9 ↗
30. R. Cao, Q. Huang, J.H. Chen, and P. Wang: J. Alloy. Compd., 2014, vol. 585, pp. 622-32.10.1016/j.jallcom.2013.09.197 ↗
31. Lei H., Li Y., Carlson B.E., Lin Z. J. Manuf. Sci. Eng., 2015, vol. 137, pp. 051028-1-10.
32. Lei H., Li Y., Carlson B.E., Lin Z. J. Manuf. Sci. Eng., 2016, vol. 138, pp. 071009-1-13.10.1115/1.4032082 ↗
33. V.R. Ryabov: Fusion welding of aluminum to steel, edited machine translation of the USAF Foreign Technology Division, National Technical Information Service, US Department of Commerce, Springfield, VA, 1973.
34. N. Jank, H. Staufer, and J. Bruckner: BHM, 2008, vol. 153, no. 5, pp. 189-92.
35. U.R. Kattner and B.P. Burton: In: ASM Handbook, Volume 3: Alloy Phase Diagrams, ASM International, Materials Park, OH, 1992.
36. E. Gebhardt and W. Obrowski: Z. Metallk., 1953, vol. 44, pp. 154-60.
37. T. Heumann and S. Dittrich: Z. Metallk., 1959, vol. 50, pp. 617-25.
38. S. Kobayashi and T. Yakou: Mater. Sci. Eng., 2002, vol. A338, pp. 44-53.10.1016/S0921-5093(02)00053-9 ↗
39. G. Eggeler, H. Vogel, J. Friedrich, and H. Kaesche: Pract. Metallogr., 1985, vol. 22, pp. 163-70.10.1515/pm-1985-220402 ↗
40. G. Eggeler, W. Auer, and H. Kaesche: J. Mater. Sci., 1986, vol. 21, pp. 3348-50.10.1007/BF00553379 ↗
41. V.I. Dybkov: J. Mater. Sci., 1990, vol. 25, pp. 3615-33.10.1007/BF00575397 ↗
42. A. Bahadur and O.N. Mohanty: Mater. Trans. JIM, 1991, vol. 32, no. 11, pp. 1053-61.10.2320/matertrans1989.32.1053 ↗
43. A. Bahadur and O.N. Mohanty: Mater. Trans. JIM, 1995, vol. 36, no. 9, pp. 1170-75.10.2320/matertrans1989.36.1170 ↗
44. A. Shyam, S. Suwas, and S. Bhargava: Pract. Metallogr., 1997, vol. 34, pp. 264-77.10.1515/pm-1997-340602 ↗
45. K. Bouché, F. Barbier, and A. Coulet: Mater. Sci. Eng., 1998, vol. A249, pp. 167-75.10.1016/S0921-5093(98)00573-5 ↗
46. H.R. Shahverdi, M.R. Ghomashchi, S. Shabestari, and J. Hejazi: J. Mater. Process. Technol., 2002, vol. 124, pp. 345-52.10.1016/S0924-0136(02)00225-X ↗
47. A. Bouayad, C. Gerometta, A. Belkebir, and A. Ambari: Mater. Sci. Eng., 2003, vol. A363, pp. 53-61.10.1016/S0921-5093(03)00469-6 ↗
48. W.-J. Cheng and C.-J. Wang: Surf. Coat. Technol., 2009, vol. 204, pp. 824-28.10.1016/j.surfcoat.2009.09.061 ↗
49. Y. Tanaka and M. Kajihara: Mater. Trans., 2009, vol. 50, no. 9, pp. 2212-20.10.2320/matertrans.M2009128 ↗
50. Y. Tanaka and M. Kajihara: J. Mater. Sci., 2010, vol. 45, pp. 5676-84.10.1007/s10853-010-4633-y ↗
51. H. Springer, A. Kostka, E.J. Payton, D. Raabe, A. Kaysser-Pyzalla, and G. Eggeler: Acta Mater., 2011, vol. 59, pp. 1586-1600.10.1016/j.actamat.2010.11.023 ↗
52. F. Yin, M. Zhao, Y. Liu, W. Han, and Z. Li: T. Nonferr. Met. Soc. China, 2013, vol. 23, pp. 556-61.10.1016/S1003-6326(13)62499-1 ↗
53. N. Takata, M. Nishimoto, S. Kobayashi, and M. Takeyama: Intermet., 2014, vol. 54, pp. 136-42.10.1016/j.intermet.2014.06.003 ↗
54. N. Takata, M. Nishimoto, S. Kobayashi, and M. Takeyama: ISIJ Int., 2015, vol. 55, no. 7, pp. 1454-59.10.2355/isijinternational.55.1454 ↗
55. H. Springer, A. Szczepaniak, and D. Raabe: Acta Mater., 2015, vol. 96, pp. 203-11.10.1016/j.actamat.2015.06.028 ↗
56. M.V. Akdeniz and A.O. Mekhrabov: Acta Mater., 1998, vol. 46, no. 4, pp. 1185-92.10.1016/S1359-6454(97)00318-2 ↗
57. J.L. Song, S.B. Lin, C.L. Yang, and C.L. Fan: J. Alloy. Compd., 2009, vol. 488, pp. 217-22.10.1016/j.jallcom.2009.08.084 ↗
58. Götzinger B, Karner W, Hartmann M, Silvayeh Z: Lightweight Des., 2017, vol. 10, pp. 50-55.10.1007/s35725-017-0010-y ↗
59. European Steel and Alloy Grades / Numbers Searchable Database (National Technical University Kharkiv Polytechnic Institute, 2016), http://www.steelnumber.com/.
60. B. Irving: Weld. J., 1997, vol. 76, no. 7, pp. 53-57.
61. A.F. Norman, P.B. Prangnell, and R.S. McEven: Acta Mater., 1998, vol. 46, no. 16, pp. 5715-32.10.1016/S1359-6454(98)00257-2 ↗
62. V.V. Zakharov: Met. Sci. Heat Treat., 2003, vol. 45, no. 7-8, pp. 246-53.10.1023/A:1027368032062 ↗
63. Z. Ahmad: JOM, 2003, vol. 55, no. 2, pp. 35-39.10.1007/s11837-003-0224-6 ↗
64. J. Røyset and N. Ryum: Int. Mater. Rev., 2005, vol. 50, no. 1, pp. 19-44.10.1179/174328005X14311 ↗
65. M.G. Mousavi, C.E. Cross, and Ø. Grong: Sci. Technol. Weld. Join., 1999, vol. 4, no. 6, pp. 381-88.10.1179/136217199101538030 ↗
66. A.F. Norman, S.S. Birley, and P.B. Prangnell: Sci. Technol. Weld. Join., 2003, vol. 8, no. 4, pp. 235-45.10.1179/136217103225010989 ↗
67. A.F. Norman, K. Hyde, F. Costello, S. Thompson, S. Birley, and P.B. Prangnell: Mater. Sci. Eng., 2003, vol. A354, pp. 188-98.10.1016/S0921-5093(02)00942-5 ↗
68. Z. Silvayeh, R. Vallant, C. Sommitsch, B. Götzinger, and W. Karner: In: Proc. 10th Int. Conf. Trends Weld. Res., October 11-14, 2016, Tokyo, pp. 32-35.
69. H. Mehrer: Diffusion in Solids, Springer, Berlin-Heidelberg-New York, 2007.10.1007/978-3-540-71488-0 ↗
70. S. Madhavan, M. Kamaraj, L. Vijayaraghavan, and K. Srinivasa Rao: Mater. Sci. Technol., 2017, vol. 33, no. 2, pp. 200-09.10.1080/02670836.2016.1176716 ↗
71. B. Mezrag, F. Deschaux-Beaume, and M. Benachour: Sci. Technol. Weld. Join., 2015, vol. 20, no. 3, pp. 189-98.10.1179/1362171814Y.0000000271 ↗
72. S.P. Gupta: Mater. Charact., 2003, vol. 49, pp. 269-91.10.1016/S1044-5803(03)00006-8 ↗
73. T. Maitra and S.P. Gupta: Mater. Charact., 2003, vol. 49, pp. 293-311.10.1016/S1044-5803(03)00005-6 ↗
74. M. Gatzen, T. Radel, C. Thomy, and F. Vollertsen: J. Mater. Process. Technol., 2014, vol. 214, pp. 123-31.10.1016/j.jmatprotec.2013.08.005 ↗
75. Q. Lin, G. Mao, Q. Huang, R. Cao, and J. Chen: J. Iron Steel Res., 2016, vol. 23, no. 6, pp. 566-72.10.1016/S1006-706X(16)30089-9 ↗