journal article·2013-03

Topologically Close-Packed μ Phase Precipitation in Creep-Exposed Inconel 617 Alloy

R. Krishna, S. V. Hainsworth, S. P. A. Gill, A. Strang, H. V. Atkinson

Publisher page

Abstract

Two creep-exposed Inconel 617 alloy samples [923 K (650 °C) for 45,000 hours and 973 K (700 °C) for 4000 hours] have been studied using analytical electron microscopy and X-ray diffraction techniques. The thermodynamically predicted equilibrium phases in Inconel 617 alloy were compared with the phases observed which are molybdenum-enriched, topologically close-packed μ-phase, along with precipitates of gamma-prime (γ′), M23C6 and Ti(C,N). The μ-phase precipitates were in the size range 60 to 500 nm (with some larger agglomerates); they were situated both within the grains, along twin and grain boundaries, and near intra- and intergranular carbides. The stacking faults in the μ-phase were observed in high magnification electron microscopy. The precipitation of the μ-phase in these samples is significant for the potential use of this alloy in future generation steam power plants as the appearance of the μ-phase is associated with an increased tendency for cracks and voids to initiate. The μ-phase has not been previously identified in the literature relating to creep or thermal exposure of Inconel 617 alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. J.C. Hosier and D.J. Tillack: Met. Eng. Q., 1972, vol. 12 (3), pp. 51–55.
2. W.L. Mankins, J.C. Hosier, and T.H. Bassford: Metall. Mater. Trans. B, 1974, vol. 5, pp. 2579–90.10.1007/BF02643879 ↗
3. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006, pp. 158–65.10.1017/CBO9780511541285 ↗
4. C.M.F. Rae and R.C. Reed: Acta Mater., 2001, vol. 49, pp. 4113–25.10.1016/S1359-6454(01)00265-8 ↗
5. C.T. Sims: in Superalloys II, C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds., John Wiley, New York, 1987, pp. 217–40.
6. M. Simonetti and P. Caron: Mater. Sci. Eng. A, 1998, vol. 254, pp. 1–12.10.1016/S0921-5093(98)00766-7 ↗
7. X.Z. Qin, J.T. Guo, C. Yuan, G.X. Yang, L.Z. Zhou, and H.Q. Ye: J. Mater. Sci., 2009, vol. 44, pp. 4840–47.10.1007/s10853-009-3738-7 ↗
8. J.-C. Zhao and M.F. Henry: Adv. Eng. Mater., 2002, vol. 4 (7), pp. 501–08.10.1002/1527-2648(20020717)4:7<501::AID-ADEM501>3.0.CO;2-3 ↗
9. H.M. Tawancy: J. Mater. Sci., 1996, vol. 31, pp. 3929–36.10.1007/BF00352653 ↗
10. N.D. Evans, P.J. Maziasz, J.P. Shingledecker, and Y. Yamamoto: Mater. Sci. Eng. A, 2008, vol. 498 (1–2), pp. 412–20.10.1016/j.msea.2008.08.017 ↗
11. J.X. Yang, Q. Zheng, X.F. Sun, H.R. Guan, and Z.Q. Hu: Scripta Mater., 2006, vol. 55 (4), pp. 331–34.10.1016/j.scriptamat.2006.04.032 ↗
12. K. Zhao, L.H. Lou, Y. Wen, H. Li, and Z.Q. Hu: J. Mater. Sci., 2004, vol. 39 (1), pp. 369–71.10.1023/B:JMSC.0000008092.24832.82 ↗
13. M.S.A. Karunaratne, C.M.F. Rae, and R.C. Reed: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2409–21.10.1007/s11661-001-0032-y ↗
14. R.C. Reed, M.P. Jackson, and Y.S. Na: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 521–33.10.1007/s11661-999-0044-6 ↗
15. M. Raghavan, R.R. Mueller, G.A. Vaughn, and S. Floreen: Metall. Trans. A, 1984, vol. 15A, pp. 783–92.10.1007/BF02644553 ↗
16. H. Kirchhöfer, F. Schubert, and H. Nickel: Nucl. Technol., 1984, vol. 66 (1), pp. 139–48.10.13182/NT84-A33462 ↗
17. Q. Wu, H. Song, R.W. Swindeman, J.P. Shingledecker, and V.K. Vasudevan: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2569–85.10.1007/s11661-008-9618-y ↗
18. R. Krishna, S.V. Hainsworth, H.V. Atkinson, and A. Strang: Mater. Sci. Technol., 2010, vol. 26 (7), pp. 797–802.10.1179/026708309X12584564052094 ↗
19. N. Saunders, Z. Guo, X. Li, A.P. Miodownik, and J.-P. Schillé: in Superalloys 2004, K.A. Green, T.M. Pollock, and H. Harada, eds., TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2004, pp. 849–58.10.7449/2004/Superalloys_2004_849_858 ↗
20. Y. Hosoi and S. Abe: Metall. Trans. A, 1975, vol. 6A, pp. 1171–78.10.1007/BF02658525 ↗
21. O.F. Kimball, G.Y. Lai, and G.H. Reynolds: Metall. Trans. A, 1976, vol. 7A, pp. 1951–52.10.1007/BF02659828 ↗
22. T. Takahashi, J. Fujiwara, T. Matsushima, M. Kiyokawa, I. Morimoto, and T. Watanabe: Trans. ISIJ, 1978, vol. 18, pp. 221–24.10.2355/isijinternational1966.18.221 ↗
23. S. Kihara, J.B. Newkirk, A. Ohtomo, and Y. Saiga: Metall. Trans. A, 1980, vol. 11A, pp. 1019–31.10.1007/BF02654716 ↗
24. E. Gariboldi, M. Cabibbo, S. Spigarelli, and D. Ripamonti: Int. J. Press. Vessels Pip., 2008, vol. 85, pp. 63–71.10.1016/j.ijpvp.2007.06.014 ↗
25. K. Schneider, W. Hartnagel, P. Schepp, and B. Ilschner: Nucl. Technol., 1984, vol. 66 (2), pp. 289–95.10.13182/NT84-A33432 ↗
26. G.N. Maniar and A. Szirmae, eds.: Manual on Electron Metallography Techniques, ASTM Special Technical Publication 547, American Society for Testing and Materials, Philadelphia, PA, 1973, pp. 3–24.10.1520/STP547-EB ↗
27. K.C. Thompson-Russell and J.W. Edington: Electron Microscope Specimen Preparation Techniques in Materials Science, vol. 5, Philips Technical Library, Monographs in Practical Electron Microscopy in Materials Science, Macmillan Publishers Ltd, London, 1977.10.1007/978-1-349-03403-1_1 ↗
28. K.R. Vishwakarma, N.L. Richards, and M.C. Chaturvedi: Mater. Sci. Eng A, 2008, vol. 480 (1–2), pp. 517–28.10.1016/j.msea.2007.08.002 ↗
29. W. Betteridge and J. Heslop, eds.: The Nimonic Alloys and Other Nickel-Base High-Temperature Alloys, Edward Arnold (Publishers) Ltd., London, 1959, pp. 71–72.
30. R. Krishna, S.V. Hainsworth, S.P.A. Gill, A. Strang, and H.V. Atkinson: Proc. 2nd Int. ECCC Conf. on ‘Creep & Fracture in High Temperature Components—Design & Life Assessment’, I.A. Shibli and S.R. Holdsworth, eds., 21–23 April 2009, Zurich, pp. 764–76.
31. Thermo-Calc Software AB (Version 4), http://www.thermocalc.com, Stockholm, Sweden, August 2006.
32. P.J. Ennis, K.P. Mohr, and H. Schuster: Nucl. Technol., 1984, vol. 66 (2), pp. 363–68.10.13182/NT84-A33439 ↗