journal article·2015-06Open access

The Effect of Active Phase of the Work Material on Machining Performance of a NiTi Shape Memory Alloy

Yusuf Kaynak, Haluk E. Karaca, Ronald D. Noebe, I. S. Jawahir

Abstract

Poor machinability with conventional machining processes is a major shortcoming that limits the manufacture of NiTi components. To better understand the effects of phase state on the machining performance of NiTi alloys, cutting temperature, tool-wear behavior, cutting force components, tool-chip contact length, chip thickness, and machined surface quality data were generated from a NiTi alloy using precooled cryogenic, dry, minimum quantity lubrication (MQL), and preheated machining conditions. Findings reveal that machining NiTi in the martensite phase, which was achieved through precooled cryogenic machining, profoundly improved the machining performance by reducing cutting force components, notch wear, and surface roughness. Machining in the austenite state, achieved through preheating, did not provide any benefit over dry and MQL machining, and these processes were, in general, inferior to cryogenic machining in terms of machining performance, particularly at higher cutting speeds.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Advanced machining processes and optimization · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. O. Benafan, S. Padula, R. Noebe, T. Sisneros, R. Vaidyanathan: J. Appl. Phys., 112 (2012) 093510–11.10.1063/1.4764313 ↗
2. K. Yamauchi (2011) Shape Memory and Superelastic Alloys: Technologies and Applications, Woodhead Publishing, Cambridge.10.1533/9780857092625 ↗
3. F.T. Calkins, J.H. Mabe (2010) J Mech Design 132:11101210.1115/1.4001119 ↗
4. O. Benafan, J. Brown, F.T. Calkins, P. Kumar, A. Stebner, T. Turner, R. Vaidyanathan, J. Webster, and M.L. Young: ASME 2011 Conference on Smart Materials, 2011, pp. 18–21.
5. Y. Kaynak, H.E. Karaca, R.D. Noebe, I.S. Jawahir: Wear, 306 (2013) 51–63.10.1016/j.wear.2013.05.011 ↗
6. K. Weinert, V. Petzoldt, and D. Kotter: CIRP Ann. Manuf. Technol. 53 (2004) 65–68.10.1016/S0007-8506(07)60646-5 ↗
7. K. Weinert, V. Petzoldt: Mater. Sci. Eng. A, 378 (2004) 180–84.10.1016/j.msea.2003.10.344 ↗
8. O. Benafan, R.D Noebe, S.A. Padula, A. Garg, B. Clausen, S. Vogel, R. Vaidyanathan: Int. J. Plast 51 (2013) 103–21.10.1016/j.ijplas.2013.06.003 ↗
9. O. Benafan, R. Noebe, S. Padula II, D. Gaydosh, B. Lerch, A. Garg, G. Bigelow, K. An, R. Vaidyanathan: Scripta Mater. 68 (2013) 571–74.10.1016/j.scriptamat.2012.11.042 ↗
10. S. Qiu, V. Krishnan, S. Padula, R. Noebe, D. Brown, B. Clausen, R. Vaidyanathan: Appl. Phys. Lett. 95 (2009) 141906–03.10.1063/1.3245308 ↗
11. S. Qiu, B. Clausen, S. Padula, R. Noebe, R. Vaidyanathan: Acta Mater. 59 (2011) 5055–66.10.1016/j.actamat.2011.04.018 ↗
12. A. Stebner, D. Brown, L. Brinson: Acta Mater. 61 (2013) 1944–56.10.1016/j.actamat.2012.12.015 ↗
13. A. Stebner, S.C. Vogel, R.D. Noebe, T.A. Sisneros,B. Clausen,D.W. Brown, A. Garg, L.C. Brinson: J. Mech. Phys. Solids 61 (2013) 2302–30.10.1016/j.jmps.2013.05.008 ↗
14. O. Benafan, R.D Noebe, S.A. Padula II, D.W. Brown, S. Vogel, R. Vaidyanathan: Int. J. Plast. 56 (2014) 99–118.10.1016/j.ijplas.2014.01.006 ↗
15. S. Padula, S. Qiu, D. Gaydosh, R. Noebe, G. Bigelow, A. Garg, R. Vaidyanathan (2010) Metall. Mater. Trans. A 43A:4610–21
16. K. Atli, I. Karaman, R. Noebe, D. Gaydosh: Mater. Sci. Eng. A 560 (2013) 653–66.10.1016/j.msea.2012.10.009 ↗
17. Y. Liu, A. Mahmud, F. Kursawe, T.-H. Nam: J. Alloy. Compd. 449 (2008) 82–87.10.1016/j.jallcom.2006.02.080 ↗
18. E.O. Ezugwu, J. Bonney, D.A. Fadare, W.F. Sales: J. Alloy. Compd. 162 (2005) 609–14.10.1016/j.jmatprotec.2005.02.144 ↗
19. M. Bermingham, J. Kirsch, S. Sun, S. Palanisamy, M. Dargusch: Int. J. Mach. Tools Manuf 51, 2011, 500–11.10.1016/j.ijmachtools.2011.02.009 ↗
20. Y. Kaynak: Int. J. Adv. Manuf. Technol., 2014, vol. 71, pp. 919–33.10.1007/s00170-014-5683-0 ↗
21. P. Oxley: Int. J. Mech. Sci. 4 (1962) 129–35.10.1016/S0020-7403(62)80035-6 ↗
22. H. Attia, S. Tavakoli, R. Vargas, V. Thomson: CIRP Ann. Manuf. Technol. 59 (2010) 83–88.10.1016/j.cirp.2010.03.093 ↗
23. C.R. Dandekar, Y.C. Shin, J. Barnes: Int. J. Mach. Tools Manuf. 50 (2010) 174–82.10.1016/j.ijmachtools.2009.10.013 ↗
24. E.O. Ezugwu: Int. J. Mach. Tools Manuf. 45 (2005) 1353–67.10.1016/j.ijmachtools.2005.02.003 ↗
25. S.Y. Hong, I. Markus, W. Jeong: Int. J. Mach. Tools Manuf. 41 (2001) 2245–60.10.1016/S0890-6955(01)00041-4 ↗
26. K.A. Venugopal, S. Paul, A.B. Chattopadhyay: Wear, 262 (2007) 1071–78.10.1016/j.wear.2006.11.010 ↗
27. M. Bermingham, S. Palanisamy, M. Dargusch (2012) Int. J. Mach. Tools Manuf. 62:76–87.10.1016/j.ijmachtools.2012.07.001 ↗
28. Y. Liu, Z. Xie, Progress in Smart Materials and Structures, Nova Science Publishers Inc, New York, 2007, pp. 29–65.
29. Y. Kaynak: Unpublished internal reports, University of Kentucky, USA.