journal article·2015-05

Texture Development and Plastic Deformation in a Pilgered Zircaloy-4 Tube

Jaiveer Singh, Sivasambu Mahesh, Gulshan Kumar, Prita Pant, D. Srivastava, G. K. Dey, N. Saibaba, I. Samajdar

Publisher page

Abstract

The development of microstructure and crystallographic texture with effective strain at three through-thickness locations (near rolls, center, and near mandrel) in a partly pilgered Zircaloy-4 tube is described. Pilgering is found to eliminate through-thickness variation in grain size in the starting hot-extruded material and to generate location-dependent asymmetries in crystallographic texture. Deformation texture development during pilgering is modeled with polycrystal plasticity by idealizing the metal flow pattern as axisymmetric flow through a convergent channel. Good qualitative comparison of the predicted and experimental post-pilgering textures is obtained, provided location-dependent transverse shear component is superposed on the gross flow field, and localized deformation at grain boundaries is allowed. Frictional forces between tube and die are deduced from these observations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. O. Strehlau: Tube Pipe J., 2006, pp. 1–4.
2. J. Osika, H. Palkowski, K. Swiatkowski, D. Pociecha, and A. Kula: Arch. Metall. Mater., 2009, vol. 54, pp. 1239–51.
3. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-Mechanical Processing of Metallic Materials, 2007, pp. 289–97.
4. B.A. Cheadle, C.E. Ells, and W. Evans: J. Nucl. Mater., 1967, vol. 23, pp. 199–208.10.1016/0022-3115(67)90065-7 ↗
5. E. Tenckhoff: ASTM Spec. Tech. Publ. 966, 1988, pp. 1–77.
6. N. Saibaba: J. Nucl. Mater., 2008, vol. 383, pp. 63–70.10.1016/j.jnucmat.2008.08.045 ↗
7. H. Abe, L.K. Takeda, A. Uehira, H. Anada, and M. Furugen: ASTM Spec. Tech. Publ. 1354, 2000, pp. 425–59.
8. H. Abe and M. Furugen: J. Mater. Process. Technol., 2012, vol. 212, pp. 1687–93.10.1016/j.jmatprotec.2012.03.012 ↗
9. A. Gaillac, C. Lemaignan, and P. Barberis: J. ASTM Int., 2011, vol. 8, pp. 1–16.10.1520/JAI103026 ↗
10. C.S. Cook, G.P. Sabol, K.R. Sekera, and S.N. Randall: ASTM Spec. Tech. Publ. 1132, 1991, pp. 80–95.
11. E. Tenckhoff: J. ASTM Int., 2005, vol. 2, pp. 1–26.10.1520/JAI12945 ↗
12. S.S. Bhadauria, M.S. Hora, and K.K. Pathak: J. Solid Mech., 2009, vol. 1, pp. 226–32.
13. R.W. Davies, M.A. Khaleel, W.C. Kinsel, and H.M. Zbib: J. Eng. Mater. Technol., 2002, vol. 124, pp. 125–34.10.1115/1.1446472 ↗
14. Y. Choi, E.J. Shin, and H. Inoue: Phys. B, 2006, vol. 385-386, pp. 529–31.10.1016/j.physb.2006.05.352 ↗
15. V.M. Allen, M. Preuss, J.D. Robson, and R.J. Comstock: Mater. Sci. Forum, 2005, vol. 495-497, pp. 675–80.10.4028/www.scientific.net/MSF.495-497.675 ↗
16. R. Krishnan and M.K. Asundi: in Proc. Indian Acad. Sci. (Eng. Sci.) Vol. 4, Pt. 1, 1981, pp. 41–56.10.1007/BF02843474 ↗
17. E. Tenckhoff and P.L. Rittenhouse: ASTM Spec. Tech. Publ. 458, 1969, pp. 50–67.
18. G. Dressler, K.H. Matucha, and P. Wincierz: Can. Metall. Q., 1972, vol. 11, pp. 177–84.10.1179/cmq.1972.11.1.177 ↗
19. K. Kallstrom: Can. Metall. Q., 1972, vol. 11, pp. 185–98.10.1179/cmq.1972.11.1.185 ↗
20. Y. Choi and H. Inoue: Mater. Trans., 2010, vol. 51, pp. 652–58.10.2320/matertrans.MG200911 ↗
21. E. Girard, R. Guillen, P. Weisbecker, and M. Francois: J. Nucl. Mater., 2001, vol. 294, pp. 330–38.10.1016/S0022-3115(00)00729-7 ↗
22. R. Guillen, C. Cossu, M. Franc, and E. Girard: J. Nucl. Mater., 1998, vol. 255, pp. 174–79.10.1016/S0022-3115(98)00020-8 ↗
23. R. Guillen, J.L. Feron, J.L. Glimois, F. Hunt, J. Le Pape, and J. Senevat: Textures Microstruct., 1991, vol. 14-18, pp. 519–24.10.1155/TSM.14-18.519 ↗
24. N.P. Gurao, H. Akhiani, and J.A. Szpunar: J. Nucl. Mater., 2014, vol. 453, pp. 158–68.10.1016/j.jnucmat.2014.06.047 ↗
25. P.S. Godavarti, S. Hussien, and K. Linga Murty: Metall. Trans. A, 1988, vol. 19A, pp. 1243–55.10.1007/BF02662585 ↗
26. K.V. Mani Krishna, A. Sain, I. Samajdar, G. Dey, D. Srivastava, S. Neogy, R. Tewari, and S. Banerjee: Acta Mater., 2006, vol. 54, pp. 4665–75.10.1016/j.actamat.2006.06.004 ↗
27. R.P. Marshall: J. Nucl. Mater., 1967, vol. 24, pp. 49–59.10.1016/0022-3115(67)90079-7 ↗
28. K. Vaibhaw, S.V.R. Rao, S.K. Jha, N. Saibaba, and R.N. Jayaraj: J. Nucl. Mater., 2008, vol. 383, pp. 71–77.10.1016/j.jnucmat.2008.08.035 ↗
29. S. R. MacEwen and C. Tome: ASTM Spec. Tech. Publ. 939, 1987, pp. 631–50.
30. M. Furugen and C. Hayashi: J. Mech. Work. Technol., 1984, vol. 10, pp. 273–86.10.1016/0378-3804(84)90043-3 ↗
31. J.L. Aubin, E. Girard, and P. Montmitonnet: ASTM Spec. Tech. Publ. 1245, 1994, pp. 245–63.
32. S. Mulot, A. Hacquin, P. Montmitonnet, and J.-L. Aubin: J. Mater. Process. Technol., 1996, vol. 60, pp. 505–12.10.1016/0924-0136(96)02378-3 ↗
33. P. Montmitonnet, R. Loge’, M. Hamery, Y. Chastel, J.-L. Doudoux, and J.-L. Aubin: J. Mater. Process. Technol., 2002, vol. 125–126, pp. 814–20.10.1016/S0924-0136(02)00379-5 ↗
34. B. Lodej, K. Niang, P. Montmitonnet, and J.-L. Aubin: J. Mater. Process. Technol., 2006, vol. 177, pp. 188–91.10.1016/j.jmatprotec.2006.04.086 ↗
35. M. Harada, A. Honda, and S. Toyoshima: J. ASTM Int., 2005, vol. 2, pp. 1–14.10.1520/JAI12334 ↗
36. R.A. Lebensohn, M.I. Gonzalez, C.N. Tome, and A.A. Pochettino: J. Nucl. Mater., 1996, vol. 229, pp. 57–64.10.1016/0022-3115(95)00210-3 ↗
37. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, U.K., 1998.
38. S. Mahesh: Int. J. Plast., 2009, vol. 25, pp. 752–67.10.1016/j.ijplas.2008.06.011 ↗
39. Y. Choi and H. Inoue: Mater. Sci. Forum, 2007, vol. 558-559, pp. 1379–82.10.4028/www.scientific.net/MSF.558-559.1379 ↗
40. K.V. Mani Krishna, S.K. Sahoo, I. Samajdar, S. Neogy, R. Tewari, D. Srivastava, G.K. Dey, G. H. Das, N. Saibaba, S. Banarjee 2008. J. Nucl. Mater 383:78–85.10.1016/j.jnucmat.2008.08.050 ↗
41. F. E. Hauser, P. R. Landon, and J. E. Dorn: Trans. ASM, 1956, vol. 48, pp. 986–1002.
42. B.D. Cullity and S.R. Stock: Elements of X-Ray Diffraction, 3rd Edition, Prentice Hall, New Jersey, 2001, pp. 416–21.
43. D. Raabe and K. Lücke: Phys. Status Solidi, 1993, vol. 180, pp. 59–65.10.1002/pssb.2221800103 ↗
44. M.M. Nowell and S.I. Wright: Ultramicroscopy, 2005, vol. 103, pp. 41–58.10.1016/j.ultramic.2004.11.012 ↗
45. T.H. Cormen, C.E. Leiserson, R.L. Rivest, and C. Stein: Introduction to Algorithms, Third Edit, MIT press, Cambridge, 2009.
46. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24.
47. R.A. Lebensohn and C.N. Tomé: Acta Met. Mater., 1993, vol. 41, pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
48. C.N. Tomé, P.J. Maudlin, R.A. Lebensohn, and G.C. Kaschner: Acta Mater., 2001, vol. 49, pp. 3085–96.10.1016/S1359-6454(01)00190-2 ↗
49. J.W. Christian and S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1–157.10.1016/0079-6425(94)00007-7 ↗
50. G.Y. Chin, W.F. Hosford, and D.R. Mendorf: Proc.of R. Soc. London, 1969, vol. 309, pp. 433–56.10.1098/rspa.1969.0051 ↗
51. L. Wang, Y. Yang, P. Eisenlohr, T.R. Bieler, M.A. Crimp, and D.E. Mason: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 421–30.10.1007/s11661-009-0097-6 ↗
52. L. Capolungo, P.E. Marshall, R.J. McCabe, I.J. Beyerlein, and C.N. Tomé: Acta Mater., 2009, vol. 57, pp. 6047–56.10.1016/j.actamat.2009.08.030 ↗
53. M. A. Meyers and E. Ashworth: Phil. Mag. A, 1982, vol. 46, pp. 737–59.10.1080/01418618208236928 ↗
54. N. Keskar, S. Mukherjee, K.V. Mani Krishna, D. Srivastava, G.K. Dey, P. Pant, R.D. Doherty, and I. Samajdar: Acta Mater., 2014, vol. 69, pp. 265–74.10.1016/j.actamat.2014.01.023 ↗
55. P.G. Partridge: Philos. Mag., 1965, vol. 12, pp. 1043–54.10.1080/14786436508228133 ↗
56. P.G. Partridge: Met. Rev., 1967, vol. 12, pp. 169–94.10.1179/imr.1967.12.1.169 ↗
57. W.J. McG. Tegart: Philos. Mag., 1964, vol. 9, pp. 339–41.10.1080/14786436408229197 ↗
58. M.L. Picklesimer: J. Electrochem. Soc., 1966, vol. 4, pp. 289–300.
59. J.L. Martin and R.E. Reed-Hill: Trans. Met. Soc. AIME, 1964, vol. 230, pp. 780–85.
60. E.J. Rapperport: Acta Metall., 1959, vol. 7, pp. 254–60.10.1016/0001-6160(59)90018-5 ↗
61. O. Engler, M. Crumbach, and S. Li: Acta Mater., 2005, vol. 53, pp. 2241–57.10.1016/j.actamat.2005.01.032 ↗
62. G. Sachs: Z. Verein. Deutsch. Ing., 1928, vol. 72, pp. 734–47.
63. A. Staroselsky and L. Anand: Int. J. Plast., 2003, vol. 19, pp. 1843–64.10.1016/S0749-6419(03)00039-1 ↗
64. H. Abe, K. Matsuda, T. Hama, T. Konishi, and M. Furugen: ASTM Spec. Tech. Publ. 1245, 1994, pp. 285–306.
65. J.J. Kearns: Thermal Expansion and Preferred Orientation in Zircaloy, Pittsburgh, PA (USA), 1965, p. WAPD-TM-472.
66. K.V. Mani Krishna, D. Srivastava, G.K. Dey, V. Hiwarkar, I. Samajdar, and N. Saibaba: J. Nucl. Mater., 2011, vol. 414, pp. 492–97.10.1016/j.jnucmat.2011.04.065 ↗
67. J.J. Kearns: J. Nucl. Mater., 2001, vol. 299, pp. 171–74.10.1016/S0022-3115(01)00686-9 ↗
68. R.G. Ballinger and R.M. Pelloux: J. Nucl. Mater., 1981, vol. 97, pp. 231–53.10.1016/0022-3115(81)90471-2 ↗
69. J.A. Gruber, S.A. Brown, and G.A. Lucadamo: J. Nucl. Mater., 2011, vol. 408, pp. 176–82.10.1016/j.jnucmat.2010.11.031 ↗
70. K.L. Murty and I. Charit: Prog. Nucl. Energy, 2006, vol. 48, pp. 325–59.10.1016/j.pnucene.2005.09.011 ↗
71. N. Nagai, T. Kakuma, and K. Fujita: ASTM Spec. Tech. Publ. 754, 1982, pp. 26–38.
72. T. Konishi, M. Honji, T. Kojima, and H. Abe: ASTM Spec. Tech. Publ. 939, 1987, pp. 653–61.
73. V. Randle and O. Engler: Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, CRC Press, 2000.10.1201/9781482287479 ↗
74. K.-H. Kim and D.N. Lee: Acta Mater., 2001, vol. 49, pp. 2583–95.10.1016/S1359-6454(01)00036-2 ↗
75. J. Sarkar, S. Cao, and S. Saimoto: Mater. Sci. Forum, 2005, vol. 495-497, pp. 567–72.10.4028/www.scientific.net/MSF.495-497.567 ↗
76. C.S. Lee, R.E. Smallman, and B.J. Duggan: Mater. Sci. Technol., 1994, vol. 10, pp. 149–54.10.1179/mst.1994.10.2.149 ↗
77. S.K. Sahoo, V.D. Hiwarkar, A. Majumdar, I. Samajdar, P. Pant, G.K. Dey, D. Srivastav, R. Tiwari, and S. Banerjee: Mater. Sci. Eng. A, 2009, vol. 518, pp. 47–55.10.1016/j.msea.2009.05.025 ↗
78. S.K. Sahoo, V.D. Hiwarkar, I. Samajdar, P. Pant, G.K. Dey, D. Srivastav, R. Tewari, and S. Banerjee: Mater. Sci. Technol., 2010, vol. 26, pp. 104–14.10.1179/174328408X393396 ↗
79. H. Numakura, Y. Minonishi, and M. Koiwa: Philos. Mag. A, 1991, vol. 63, pp. 1077–84.10.1080/01418619108213938 ↗
80. S. Sahoo, V. Hiwarkar, I. Samajdar, G. Dey, D. Srivastav, R. Tiwari, and S. Banerjee: Scr. Mater., 2007, vol. 56, pp. 963–66.10.1016/j.scriptamat.2007.02.008 ↗
81. C.S. Lee and B.J. Duggan: Acta Metall. Mater., 1993, vol. 41, pp. 2691–99.10.1016/0956-7151(93)90138-I ↗
82. S. Mahesh, I.J. Beyerlein, and C.N. Tomé: Scr. Mater., 2005, vol. 53, pp. 965–69.10.1016/j.scriptamat.2005.06.017 ↗
83. C.F. Gu and L.S. Tóth: Acta Mater., 2011, vol. 59, pp. 5749–57.10.1016/j.actamat.2011.05.051 ↗
84. S. Mahesh: Int. J. Plast., 2010, vol. 26, pp. 42–64.10.1016/j.ijplas.2009.05.002 ↗