journal article·2010-04Open access

Deformation Mechanisms in Nanocrystalline Materials

Farghalli A. Mohamed, Heather Yang

Abstract

As a result of recent investigations on nanocrystalline (nc) materials, extensive experimental data on the deformation behavior of these materials have become available. In this article, an analysis of these data was performed to identify the requirements that a viable deformation mechanism should meet in terms of accounting for the mechanical characteristics and trends that are revealed by the data. The results of the analysis show that a viable deformation mechanism is required to account for the following: (1) an activation volume the value of which is in the range 10 to 40 b 3; (2) an activation energy that is close to the activation energy for boundary diffusion but that decreases with increasing applied stress; (3) the magnitudes of deformation rates that cover wide ranges of temperatures, stresses, and grain sizes; (4) inverse Hall–Petch behavior; and (5) limited ductility. The validity of available deformation mechanisms for nc materials is closely examined in the light of these requirements.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Electromagnetic Effects on Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. H. Gleiter: Acta Mater., 2000, vol. 48, pp. 1–29.10.1016/S1359-6454(99)00285-2 ↗
2. U.F. Kocks, A.S. Argon, and M.F. Ashby: Thermodynamics and Kinetics of Slip: Progress in Materials Science, Pergamon Press, Oxford, United Kingdom, 1975, vol. 19, pp. 1–288.
3. F. Dalla Torre, P. Spätig, R. Schäublin, and M. Victoria: Acta Mater., 2005, vol. 53, pp. 2337–49.10.1016/j.actamat.2005.01.041 ↗
4. E. Ma: Science, 2004, vol. 305, pp. 623–24.10.1126/science.1101589 ↗
5. F.A. Mohamed and M. Chauhan: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3555–67.10.1007/s11661-006-1050-6 ↗
6. L. Lu, R. Schwaiger, Z.W. Shan, M. Dao, K. Lu, and S. Suresh: Acta Mater., 2005, vol. 53, pp. 2169–79.10.1016/j.actamat.2005.01.031 ↗
7. P.S. Follansbee and U.F. Kocks: Acta. Metall., 1988, vol. 36, pp. 81–93.10.1016/0001-6160(88)90030-2 ↗
8. R.P. Carrekar, Jr. and W.R. Hibbard, Jr.: Acta Metall., 1953, vol. 1, pp. 654–63.10.1016/0001-6160(53)90022-4 ↗
9. Q. Wei, S. Cheng, K.T. Ramesh, and E. Ma: Mater. Sci. Eng., A, 2004, vol. 381A, pp. 71–79.10.1016/j.msea.2004.03.064 ↗
10. M. Legros, B.R. Elliott, M.N. Rittner, J.R. Weertman, and K.J. Hemker: Philos. Mag. A, 2000, vol. 80A, pp. 1017–26.10.1080/01418610008212096 ↗
11. D. Farkas, S. Van Petegem, P.M. Derlet, and H. Van Swygenhoven: Acta Mater., 2005, vol. 53, pp. 3115–23.10.1016/j.actamat.2005.02.012 ↗
12. O.D. Sherby, R.L. Orr, and J.E. Dorn: Trans. TMS-AIME, 1954, vol. 200, pp. 71–80.
13. W.M. Yin, S.H. Whang, and R.A. Mirshams: Acta Mater., 2005, vol. 53, pp. 383–92.10.1016/j.actamat.2004.09.034 ↗
14. B. Cai, Q.P. Kong, P. Cui, L. Lu, and K. Lu: Scripta Mater., 2001, vol. 45, pp.1407–13.10.1016/S1359-6462(01)01177-0 ↗
15. P. Shewman: Trans. AIME, 1954, vol. 200, pp. 71–80.
16. I. Roy and F.A. Mohamed: unpublished data, University of California, Irvine, 2005.
17. F. Dalla Torre, H. Van Swygenhoven, and M. Victoria: Acta Mater., 2002, vol. 50, pp. 3957–70.10.1016/S1359-6454(02)00198-2 ↗
18. Y.M. Wang, A.V. Hamza, and E. Ma: Acta Mater., 2006, vol. 54, pp. 2715–26.10.1016/j.actamat.2006.02.013 ↗
19. K.S. Kumar, H. Van Swygenhoven, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5743–74.10.1016/j.actamat.2003.08.032 ↗
20. W.M. Yin, S.H. Whang, R. Mirshams, and C.H. Xiao: Mater. Sci. Eng., A, 2001, vol. 301A, pp. 18–22.10.1016/S0921-5093(00)01385-X ↗
21. Y.J. Li, W. Blum, and F. Breutinger: Mater. Sci. Eng., A, 2004. vols. 387A–389A, pp. 585–89.
22. A.H. Chokshi, A. Rosen, J. Karch, and H. Gleiter: Scripta Metall., 1989, vol. 23, pp. 1679–83.10.1016/0036-9748(89)90342-6 ↗
23. P.G. Sanders, J.A. Eastman, and J.R. Weertman: Acta Mater., 1997, vol. 45, pp. 4019–25.10.1016/S1359-6454(97)00092-X ↗
24. F. Ebrahimi, G.R. Bourne, M.S. Kelly, and T.E. Matthews: Nanostruct. Mater., 1999, vol. 11, pp. 343–50.10.1016/S0965-9773(99)00050-1 ↗
25. H. Yang and F.A. Mohamed: Mater. Sci. Forum, 2009, vols. 633–634, pp. 411–20.10.4028/www.scientific.net/MSF.633-634.411 ↗
26. E.O. Hall: Proc. Phys. Soc., 1951, vol. B64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
27. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
28. F.A. Mohamed: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 340–47.10.1007/s11661-006-9057-6 ↗
29. J. Schiøtz and K.W. Jacobsen: Science, 2003, vol. 301, pp. 1357–59.10.1126/science.1086636 ↗
30. R.L. Coble: J. Appl. Phys., 1963, vol. 34, pp. 1679–82.10.1063/1.1702656 ↗
31. J.E. Bird, A.K. Mukherjee, and J.E. Dorn: in Quantitative Relation between Properties and Microstructure, D.G. Brandon and A. Rosen, eds., Israel Universities Press, Jerusalem, 1969, pp. 255–342.
32. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, United Kingdom, 1982. pp. 21–69.
33. R. Schwaiger, B. Moser, M. Dao, N. Chollacoop, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5159–72.10.1016/S1359-6454(03)00365-3 ↗
34. F.A. Mohamed: Scripta Metall., 1979, vol. 13, pp. 87–89.10.1016/0036-9748(79)90041-3 ↗
35. F.A. Mohamed: Metall. Trans. A, 1977, vol. 8, pp. 933–38.10.1007/BF02661575 ↗
36. N. Wang, Z. Wang, K.T. Aust, and U. Erb: Acta Metall. Mater., 1995, vol. 43, pp. 519–28.10.1016/0956-7151(94)00253-E ↗
37. G. Palumbo, S.J. Thorpe, and K.T. Aust: Scripta Metall. Mater., 1990, vol. 24, pp. 1347–50.10.1016/0956-716X(90)90354-J ↗
38. H. Hahn and K.A. Padmanabhan: Philos. Mag. B, 1997, vol. 76B, pp. 559–71.10.1080/01418639708241122 ↗
39. R.A. Masumura, P.M. Hazzledine, and C.S. Pande: Acta Mater., 1998, vol. 46, pp. 4527–34.10.1016/S1359-6454(98)00150-5 ↗
40. B. Burton: Diffusional Creep of Polycrystalline, Trans Tech Publications, Bay Village, OH, 1977, pp. 1–7.
41. T.G. Langdon and R.B.Vastava: in Mechanical Testing for Deformation Model Development: ASM STP 765, R.W. Rohde and J.C. Swearegen, eds., ASM, Metals Park, OH, 1982, pp. 435–51.10.1520/STP28901S ↗
42. H. Van Swygenhoven and P.M. Derlet: Phys. Rev. B, 2001, vol. 64B, p. 224105-9.
43. H. Van Swygenhoven and A. Caro: Phys. Rev. B, 1998, vol. 58B, pp. 11246–11251.10.1103/PhysRevB.58.11246 ↗
44. H. Conrad and J. Narayan: Scripta Mater., 2000, vol. 42, pp. 1025–30.10.1016/S1359-6462(00)00320-1 ↗
45. G.J. Fan, H. Choo, P.K. Liaw, and E.J. Lavernia: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2641–49.10.1007/s11661-005-0262-5 ↗
46. A.S. Argon and S. Yip: Philos. Mag. Lett., 2006, vol. 86, pp. 713–20.10.1080/09500830600986091 ↗
47. F.A. Mohamed: Metall. Mater. Trans. A, 2007, vol. 39A, pp. 470–72.
48. D. Wolf, V. Yamakov, S.R. Phillpot, A.K. Mukherjee, and H. Gleiter: Acta Mater., 2005, vol. 53, pp. 1–40.10.1016/j.actamat.2004.08.045 ↗
49. Y.J. Wei and L. Anand: J. Mech. Phys. Solids, 2004, vol. 52, pp. 2587–2616.10.1016/j.jmps.2004.04.006 ↗
50. R.J. Asaro, P. Krysl, and D. Kad: Philos. Mag. Lett., 2003, vol. 83, pp. 733–43.10.1080/09500830310001614540 ↗
51. R.J. Asaro and S. Suresh: Acta Mater., 2005, vol. 53, pp. 3369–82.10.1016/j.actamat.2005.03.047 ↗
52. Y. Xun and F.A. Mohamed: Philos. Mag. A, 2003, vol. 83A, pp. 2247–66.10.1080/1478643031000107230 ↗
53. Y. Xun and F.A. Mohamed: Acta Mater., 2004, vol. 52, pp. 4401–12.10.1016/j.actamat.2004.03.039 ↗